Leon auq GTX3076r by compsport New OZ Ultraleggera !!

[przemekPL]

Hello. As I see here with a few interesting projects, describes as his.
year 2002
engine 1.8T auq
wheels ori 16
suspension of the apex had
equipment of all but the armrest and the changer

po zakupie






Fire went to the first exhaust

dp 3 inches + 2.5 inches to 2 faders to el tec




http://www.youtube.com/watch?v=6BmTWwpuVt0

fmic






http://www.youtube.com/watch?v=HBX0b0vmZpk

http://www.youtube.com/watch?v=XIQOBMKxV6I +antilag

http://www.youtube.com/watch?v=H0EFlMolrlE

This was stage 1

 

[przemekPL]

stage 2


engine:
Woessner 82mm
rods no name arp2000
pins ARP
mechanical tensioner timing
aeb head + adr
all supertech
Gates belt

turbo: gt3071r ar.64
drive transfer
6 paddle sintered clutch
One Mass Flywheel
6 gear

3 inch exhaust
Ic no name (to change the precision)
bov tial (changed to dv)
maf rs4
apexi avcr
sytec fuel regulator
thermal break under the inlet manifold
SEM manifold
throttle 3 with s4
bosch 044 fuel pump
coil 2.0tfsi
oil cooler setrab

suspension
summary bilstein b6 + spring h&R
brakes ori 312mm new discs and pads

wheels ori mk4 r32
tires federal semi slick 225/40/18

the plans. new porsche brakes
new intercooler
cupra package
threaded suspension
sharper teeth screw shafts up to 8000 rpm
swirlpot

more photos

 

[przemekPL]

 

[przemekPL]

now looks like














http://www.youtube.com/watch?v=HeopJrw-ydU
http://www.youtube.com/watch?v=xfqmihIOpmk
http://www.youtube.com/watch?v=vpu7wMt3RH4
http://www.youtube.com/watch?v=Mccl06VxJyk
http://www.youtube.com/watch?v=BVrlAm-tLp4
http://www.youtube.com/watch?v=IxgD1zwZZMw


in advance sorry for my poor English

 

[brad1]

Very nice sleeper you have there Bet you've shown up alot of high powered cars!!

 

[przemekPL]

I have something to think about the gearbox ratio. 3 course ends on a 160-4th gear at 190 km / h 5th gear at 250. 4th gear all the spoils. best time to race logic 100-200 8.8 sec at 450 ps

 

[craigturbo]

This is probably one of my favourite cars on here.!

 

[INA]

Love it!

 

[R4cup]

Very nice & undercover!

 

[Mo Arif]

Awesome sleeper mate!, engine work is exceptional! Very tidy. I <3 this.

 

[DaNnY_LaD]

Do you have a pictures of ur Downpipe built up off the car mate

 

[przemekPL]

I have no pictures but it will be to change the dp after netting should be at the bottom

 

[jc_boc]

That is very impressive mate. Love the work you've done and some serious power you got going there too.

 

[PhilW]

Am i reading that graph right? 135bhp in transmission loss?

WHP figure looks right but no way is that BHP figure right.

 

[przemekPL]

losses in the drive because it inhibited in 5th. plus to this semi-slick

 

[PhilW]

Thats 40% losses tho.

 

[Alvaro_lopez]

is the fisrt time that i see this color, nice!

 

[James.Judd.1]

Thats 40% losses tho.

28% transmission loss, Somethings up there.

I must admit even at 330whp its a bit of a sleeper!

 

[PhilW]

28% transmission loss, Somethings up there.

I must admit even at 330whp its a bit of a sleeper!

Sorry, i meant about 30%. lol. Still too much.

 

[przemekPL]

replace the slicks will see how much will the loss. Even as it rummages are big losses. buying a car from a German who's doing something there. can be and rummages I do not know. but always with two wheels grabs.