LCR front splitter on New FR??

[sven7]

As per the title, does anyone know if a LCR splitter will fit the new FR bumper and whether it would look good or out of place???. Just want to make the front look a little lower than it is.

Was thinking of just buying one and seeing whether or not its wide enough to fill the full width of the bumper. I've notice people have fitted them to Ibiza's so I guess if it doesn't fit I could always fit it to the girlfriends Ibiza instead.

Has anyone got any pictures and dimensions of the splitter - across from the front corner to corner and also the depth from the front corner to the wheel arch I can at least see if it might fit.


Cheers!

 

[DanGB]

The front is alot more rounded on ours, it would never fit!

 

[barrie_d]

It will fit, L30NKB has got one on his, sets it off nicely

 

[sven7]

It will fit, L30NKB has got one on his, sets it off nicely

Have you got any pictures???

Cheers

 

[m0rk]

http://www.seatcupra.net/forums/showpost.php?p=1068832&postcount=1

 

[LEON_FR]

f**k me that looks good!

 

[L30NKB]

I had front lcr splitter on my yellow one which had the seat aero kit on, I now have a zenith grey fr with std bumpers and have just fitted one to that. Its not a big job just takes a bit of time to get right. Cheers

 

[DanGB]

How come the change of car so quickly?
also, how does the splitter fit on?
any pics mate?

 

[L30NKB]

Hi Dan, Hows the car going?. Got a good offer for the yellow one and sold it,already had a zenith one on order with sunroof,xenons,bluetooth etc etc so have started modding it now.Going for the more understated look this time and will post pics as soon as it comes back from superchips where the are TRYING!! to remapp it. Front spoiler fits with small black self tappers around the edges and make 2 1" x 1/2" holes in middle of bumper to let centre mounts of spoiler clip onto bumper then cut small nicks out of inner corner edges to enable spoiler to widen out slightly (heat gun handy to soften slightly) then fix with screws around edges. Easier with a mate to help.
Cheers Kenny

 

[Syphon]

I had front lcr splitter on my yellow one which had the seat aero kit on, I now have a zenith grey fr with std bumpers and have just fitted one to that. Its not a big job just takes a bit of time to get right. Cheers

Yes - pics please.

Scott

 

[L30NKB]

Not sure how to post pics? Help !!

 

[Tam]

Not sure how to post pics? Help !!

Use a free site like http://imageshack.us or http://photobucket.com

Or - PM me and i'll send you my e-mail address and host them for you

 

[barrie_d]

I had front lcr splitter on my yellow one which had the seat aero kit on, I now have a zenith grey fr with std bumpers and have just fitted one to that. Its not a big job just takes a bit of time to get right. Cheers

Was the zenith grey one i saw, parked outside the lay by / kwik fit the other day, its looking good

 

[L30NKB]

Yip, The Lay-By is my accessory shop, come in anytime.
Cheers

 

[Syphon]

BUMP.

Any chance of those pics L30NKB?

Ta.

Scott

 

[tissot]

where can i get hold of the splitter?

does it help plant the front end on the tarmac better?

 

[fivetones]

Nevermind the splitter the Leon mk2 can look stupidly good when equipped with wheels and a ride height so that the arches are filled properly.

Just that is enough.

 

[DanGB]

I agree with you there mate

 

[Jace]

I had front lcr splitter on my yellow one which had the seat aero kit on, I now have a zenith grey fr with std bumpers and have just fitted one to that. Its not a big job just takes a bit of time to get right. Cheers

Do you have any pics of it fitted to the Zenith grey ?


The yellow looks very cool but I cant get a good look at it with the aero kit being on ...

 

[G!zmond0]

looks awesome.What about the rear ?I ve seen a grey one like yours in Hungary.Front and rear bumper