210/225 Differences
Exterior/Interior/Visual Differences:
Most Customer Cupra R's were a '52 plate althought the odd ex-press car / demo maybe an '02 plate. All these cars had square mirrors (off a MkIV Golf) the later 210’s (from early May ’03 on) had teardrop mirrors.
All 210's had black Cupra badges (the painted lettering on the rear "Cupra" badge is black). There was a limited run (total of 60 cars) of Platinum metallic paint in early '03 cars, all had teardrop mirrors.
All 225's have teardrop mirrors, chunkier steering wheel, perforated leather on the gear knob, red cupra badges, extra stone guards on the front wheels and different wheel bearings. Platinum became standard and Artic Grey was added to the paint options. These early 225's were fitted with Tracker.
210’s steering wheel is the same as the Cupra’s, but with red stitching. The 225 has a thicker stering wheel with a red band at the top. The steering wheels are a straight swap and the airbags are the same.
We were never sure if the new wheel bearings were "upgrades" or just from a different supplier.
The “pegs” holding the front carpet mats in place are round on the 210’s and oval on the 225’s.
The parcel shelf on the 210 has retractable strings, the 225 does not.
05 Plate 225's
There were a few changes on the '05 (Sept 2005) cars:
The red was changed from Flash Red to Emocion Red. Emocion red is slightly darker.
Tracker was removed.
Cars included a “motorsport package” - a pair of Seat Sport jackets, baseball caps and a track based tuition day.
210’s have tape decks and 6 disc changers,
225’s have single CD heads and 6 disc changers,
05 reg cars have just a single CD.
Recaros and Sat Nav where the only options, the recaro option on the 210 (£1,200) was front AND rear, on the 225s it was front only and £795.
Very Late (When the FR+ came out) cars came in Metallic Black. The FR+ looks like a Euro Spec LCR - they are 180 petrol and 150 diesel cars, with the full LCR bodykit but with the Euro 17" LCR alloys, and no brembo calipers.
Engine Diffrences:
210 is an AMK Engine code, 225 is BAM.
210bhp/199lbft vs 225ps/208lbft. Both cars remap to practically the same. The 210 is actually 212ps, and the 225(ps) is actually 222bhp.
ECU Code for the 225 has an “A” on the end.
There were always rumours that the 210 had stronger internals (20mm wrist pins and different rods), but it seems that this rumour stemmed from the early Audi S3 APY engine (also 210bhp) having stronger rods. However, Yumann's engine (AMK) build thread, he kindly measured the gudgeon pins for us, and they are 20mm. The later BAM engine are supposed to have 19mm wrist pins.
From ETOS and ETKA the block and piston set for AMK :06A 103 101 J and for the BAM : 06A 103 101 J, conrod for AMK : 027 198 401 B, conrod for BAM : 027 198 401 B. So if they are different, nobody told SEAT Parts.
Both engines have VVT, but this is apparently for emissions rather than a VTEC style torque/power shift. Although most cars definitely pull again at about 4,000 rpm). Originally we thought the VVT actuation was different (one mechanical the other hydraulic) but we now understand them to be the same. Again, it is the APY (early 210 S3 engine, never fitted to the LCR) that has mechanical VVT actuation and possibly where the rumour started. Both AMK and BAM have Electro-hydraulic VVT actuation.
The turbo (K04-23 from Borg-Warner), manifold & exhaust are all the same.
Exterior/Interior/Visual Differences:
Most Customer Cupra R's were a '52 plate althought the odd ex-press car / demo maybe an '02 plate. All these cars had square mirrors (off a MkIV Golf) the later 210’s (from early May ’03 on) had teardrop mirrors.
All 210's had black Cupra badges (the painted lettering on the rear "Cupra" badge is black). There was a limited run (total of 60 cars) of Platinum metallic paint in early '03 cars, all had teardrop mirrors.
All 225's have teardrop mirrors, chunkier steering wheel, perforated leather on the gear knob, red cupra badges, extra stone guards on the front wheels and different wheel bearings. Platinum became standard and Artic Grey was added to the paint options. These early 225's were fitted with Tracker.
210’s steering wheel is the same as the Cupra’s, but with red stitching. The 225 has a thicker stering wheel with a red band at the top. The steering wheels are a straight swap and the airbags are the same.
We were never sure if the new wheel bearings were "upgrades" or just from a different supplier.
The “pegs” holding the front carpet mats in place are round on the 210’s and oval on the 225’s.
The parcel shelf on the 210 has retractable strings, the 225 does not.
05 Plate 225's
There were a few changes on the '05 (Sept 2005) cars:
The red was changed from Flash Red to Emocion Red. Emocion red is slightly darker.
Tracker was removed.
Cars included a “motorsport package” - a pair of Seat Sport jackets, baseball caps and a track based tuition day.
210’s have tape decks and 6 disc changers,
225’s have single CD heads and 6 disc changers,
05 reg cars have just a single CD.
Recaros and Sat Nav where the only options, the recaro option on the 210 (£1,200) was front AND rear, on the 225s it was front only and £795.
Very Late (When the FR+ came out) cars came in Metallic Black. The FR+ looks like a Euro Spec LCR - they are 180 petrol and 150 diesel cars, with the full LCR bodykit but with the Euro 17" LCR alloys, and no brembo calipers.
Engine Diffrences:
210 is an AMK Engine code, 225 is BAM.
210bhp/199lbft vs 225ps/208lbft. Both cars remap to practically the same. The 210 is actually 212ps, and the 225(ps) is actually 222bhp.
ECU Code for the 225 has an “A” on the end.
There were always rumours that the 210 had stronger internals (20mm wrist pins and different rods), but it seems that this rumour stemmed from the early Audi S3 APY engine (also 210bhp) having stronger rods. However, Yumann's engine (AMK) build thread, he kindly measured the gudgeon pins for us, and they are 20mm. The later BAM engine are supposed to have 19mm wrist pins.
From ETOS and ETKA the block and piston set for AMK :06A 103 101 J and for the BAM : 06A 103 101 J, conrod for AMK : 027 198 401 B, conrod for BAM : 027 198 401 B. So if they are different, nobody told SEAT Parts.
Both engines have VVT, but this is apparently for emissions rather than a VTEC style torque/power shift. Although most cars definitely pull again at about 4,000 rpm). Originally we thought the VVT actuation was different (one mechanical the other hydraulic) but we now understand them to be the same. Again, it is the APY (early 210 S3 engine, never fitted to the LCR) that has mechanical VVT actuation and possibly where the rumour started. Both AMK and BAM have Electro-hydraulic VVT actuation.
The turbo (K04-23 from Borg-Warner), manifold & exhaust are all the same.
Last edited: