Gas struts for bonnet

[Cupra306Form]

Hi, Just fitted a pair of gas lift struts for the bonnet. Got em from Ali Express

Hood Struts Kit For Cupra Formentor 2020 2021 2022 2023 2024 2025 Modify Front Bonnet Cylinders Lift Support Shocks Damper Rods - AliExpress 34

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

£26.55 inc delivery.

Came with the fixings, just needed a spray of grease on all fastenings. The car is already drilled and a tapped thread ready for them, but the hole is covered with a small black rubberised sticker. You simply unbolt the colour painted upper fastening bolt on the bonnet and insert the supplied ball joint bracket, then re-attach for the top fixing. (12mm nut)

The lower fastening as I said, remove the sticker, put fastening in and tighten - lower nut 10mm, upper is 12mm. Snap on gas struts and test.

On the link someone has posted pics of the job done if you want to see result.

I wish I'd gone for the red to match car colour, but then again how often is the bonnet open!!

 

[Delanor]

Hi, Just fitted a pair of gas lift struts for the bonnet. Got em from Ali Express

Hood Struts Kit For Cupra Formentor 2020 2021 2022 2023 2024 2025 Modify Front Bonnet Cylinders Lift Support Shocks Damper Rods - AliExpress 34

Smarter Shopping, Better Living! Aliexpress.com

www.aliexpress.com

£26.55 inc delivery.

Came with the fixings, just needed a spray of grease on all fastenings. The car is already drilled and a tapped thread ready for them, but the hole is covered with a small black rubberised sticker. You simply unbolt the colour painted upper fastening bolt on the bonnet and insert the supplied ball joint bracket, then re-attach for the top fixing. (12mm nut)

The lower fastening as I said, remove the sticker, put fastening in and tighten - lower nut 10mm, upper is 12mm. Snap on gas struts and test.

On the link someone has posted pics of the job done if you want to see result.

I wish I'd gone for the red to match car colour, but then again how often is the bonnet open!!

You can get them from Amazon as well with next day delivery but at £39.

 

[krmzl]

hey, new here so looking around as i just got my Formentor. Saw this. Looks like quite a cool mod. Found another thread as well.
I saw this one on both Amazon and AliExpress as well. Curious to your experience: did you damage something inside? How are they? Easy to open/close?

 

[Cupra306Form]

Work great, still functioning, good simple mod. No damage caused, and I always put a spray of Rustoleum rust killer spray on stuff I fit.

 

[Cupra_33]

Hi,
1 year later, they're still working good.
It only require a bit "load" to close the bonnet properly, in order it becomes properly latched.
The bonnet's own weight is not enough to close efficiently.

 

[krmzl]

thx! may get it when i start modifying it. Noticed the Racingline and Forge have both compatible air intake and Forge has a nice blow off valve. Will be fun combination.

Thanks gents!