Couple of Vag com Q's for FR TDI

[daveyonthemove]

Can anyone point me in the right direction please?
I have a FR TDI and received my (genuine) Vag com cable today, and it all works well.
I'm trying to find out how i can do a couple of things:

1) Find out my boost values while driving.
2) Switch conveinence module on or off.
3) Log 0-60 times (we all want to know deep down)
4) how to get the "TDI GRAPH" to work (if it's compatible at all?)

I've had a look through most of it before the battery died on the lap top, and even figured out how to revert to standard from my Remap ( quite a difference too i'm pleased to say)
Any hints, tips or user guides would be a great help.
Cheers
Dave

 

[Sisson]

Try the ross-tech website, there are some guides and tips on there...

Try here Clicky Clicky

 

[UncleFester]

Dave,

Try pm'ing andyc567 - i know he has vag-com and also a Tdi albeit a Toledo but he does play around with it a bit so may know

 

[Sisson]

In my Beeza tdi

Group 003 - Specified vs actual MAF Intake
Group 007 - Air Intake temps through your intercooler
Group 011 - Specified vs Actual Boost pressure

Might not be the same for yours but it might help ya...

 

[daveyonthemove]

Cheers guys. Will look into it later.
Any idea on the 0-60? i found it earlier, but got no idea where

 

[Sisson]

if you pick two groups that have speed in them you can click on an acceleration button

 

[stoneyfordNI]

the tdi graph-- do you mean the timing graph for the pump , if so then its not usuable on PD motors

 

[daveyonthemove]

if you pick two groups that have speed in them you can click on an acceleration button

That rings a bell!
I'm off out to play with it now.
Thanks stoneyfordni, i just had a look at ross tsch site and noticed it was non pd only.

 

[daveyonthemove]

Got it working, cheers for your tips.
Just managed to get one 0-60 log in as it's rush hour and there isn't enough road for me to be driving fast.
Bearing in mind i removed my remap today and drove it see the difference, and then put it back again without driving it for more than a mile, i managed to log a reasonable 0-60 in 7.2 seconds.
Can't wait for the map to adjust properly, it should get in the high 6's i hope

 

[Sisson]

what was th plus and minus values?

How often does your Vagcom take readings?

Mines 0.5 sec so times aren't too accurate

 

[daveyonthemove]

what was th plus and minus values?

How often does your Vagcom take readings?

Mines 0.5 sec so times aren't too accurate

Not sure on how often it reads TBH, i'll have to look into that.
+/- was 2.5
5 seconds was a bit optimistic, and 9 was slow even for standard, so i assume it isn't far out.
What would you think?

 

[Sisson]

Mine reads 7.0 +/- 0.5 so 6.5 or 7.5

Bearing in mind i got 6.93 at Trax and 6.38 using a G-tech..

I did get a 5.6 secs +/- 0.5 30-70 time!

 

[daveyonthemove]

Mine could be faster then.
I'll have a look at changing the read times and give it a go once the map is settled again. Might turn TCS off too this time.