• Guest would you be interested in CUPRA or SEAT valve caps? let us know in the poll

  • Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.

Black Door Mouldings

L14M_T

THE JOYS OF A 1200cc
Jan 14, 2009
231
0
RCT, South Wales
I have a 02 1.2 and was debating on removing the door/quarter mouldings or colour coding them. Does any1 know if theres any holes in the door or clips holding the mouldings on as ive checked with TPS and they pretty sure its adhesive held on but unsure if any guide lugs line up the mouldings to the panel? :shrug:
 

markthommo_84

Active Member
Sep 10, 2006
246
0
England
:banghead2 searchy search!



to save you bothering though, yes adhesive held, and yes holes in the door and pegs on the side strips to line up.

if you're going to remove them you'll need to fill and smooth. if you're going to paint them, you'll need a new set.
 

L14M_T

THE JOYS OF A 1200cc
Jan 14, 2009
231
0
RCT, South Wales
:banghead2 searchy search!



to save you bothering though, yes adhesive held, and yes holes in the door and pegs on the side strips to line up.

if you're going to remove them you'll need to fill and smooth. if you're going to paint them, you'll need a new set.

Spot on mate everything i needed to know! i work in a bodyshop ill try hard to get them off undamaged if no joy new set is under £20 for the whole car but moneys tight atm so ill try my hardest not to damage them, managers off for the week so got plenty of time to work on my own car and get the painters to repay me the favors they owe! :D
 

markthommo_84

Active Member
Sep 10, 2006
246
0
England
dont think anyone's managed to get them off in any condition suitable to put back on, not in the 3 years i've been reading this forum anyway, but good luck!
 

L14M_T

THE JOYS OF A 1200cc
Jan 14, 2009
231
0
RCT, South Wales
oh well ive got all night and till 5'o'clock tommorrow afternoon to think of a story to tell the missus how the mouldings fell off and needed new ones then fancied painting them :whistle:
 

L14M_T

THE JOYS OF A 1200cc
Jan 14, 2009
231
0
RCT, South Wales
manager left this afternoon for a course so phoned TPS + had moulding for both sides 2x quarter mouldings and 2x door mouldings £18.39 so waiting for them to get primed smooth then painted, for the sake of £20 id rather have new ones painted then fit them, than be extra careful removing the old ones because they gotta be refitted ,doesnt help that im heavy handed and have little patience! :D
 
Chris Knott Insurance - Competitive quotes for forum members