• Guest would you be interested in CUPRA or SEAT valve caps? let us know in the poll

  • Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.

Auto Gauge boost gauge. How to wire up correctly!!!!

rogers273

Active Member
May 29, 2014
36
0
Kent
I've recently followed this guide to fit my glowshift gauge, everything's perfect, apart from electrical side, I connected to the switched and unswitched, my gauge lights up when I select the colour I want it isn't saving? I tried switching the two live cables and my gauge then becomes always illuminated? Even when locked? And doesn't dim when I put my lights on? Anyone know the problem?
Thanks
 

hombre_paulo

Active Member
Jan 12, 2013
157
3
As I have the pin removal tool for electrical connectors I was planning on using a new pin and connecting the new wires that way - but for the life of me cannot find where to buy new pins
 

Bigjohn84

Intagram / johnyoung84
May 5, 2015
2,330
1
Haha yeh think halfords does them, I was gonna do it that way, I took 3 way wire from a plug and solders my guage wire to that, that I had the pin on the end of the wire from the plug wire then just pushed it unto the connector
 

Dlp1984

Active Member
Mar 3, 2013
226
0
Sidcup
Sorry to revive an old post, but I've been reading through and my digital boost gauge doesn't have a yellow wire. I've wired the black to brown and red to grey/blue. The gauge
7238e11585fe2cfa52e2009925008d03.jpg
8f43ae8e69e791d3013404e77515399e.jpg
turns on when ignition is on, but off when car is on.

Do I need to bridge the grey/blue over to the fat red wire or is that a bad idea?


Sent from my iPhone using Tapatalk
 
Last edited:

Bigjohn84

Intagram / johnyoung84
May 5, 2015
2,330
1
This is what I done. I never cut into any wires I just pushed them in to the block

77f9f9fcf54f9d6f4891565556430b64.jpg


Sent from my SM-A510F using Tapatalk
 

Dlp1984

Active Member
Mar 3, 2013
226
0
Sidcup
Problem I'm having is my green and white wire said it was mean to go to the module controller that came with my gauge, this is the instructions I have

But I'm starting to wonder if the green and white wire go together and then need to be taken to a permanent live

bc2bff995f3bcb2927c76125f569089b.png



Sent from my iPhone using Tapatalk
 
Adrian Flux insurance services - discount for forum members.