Hello everyone,
I would like to activate the following options on my Leon 5F Cupra SC 300 from 2018:
- Fold mirrors automatically when closing the doors via remote control or doors
- Indicators ; Increase the number of flashes to 5 instead of 3
- Fan speed display in auto mode
- Beep when locking / unlocking the doors (I have the alarm)
- Sweeping of the hands at start-up, if possible because I don't know if compatible with the digital cockpit)
I have an official VCDS cable from Rosstech and I installed VCDS in French.
I found the operations to be done on the forum and on other websites, but I cannot find the same channels in the calculators to be modified. In addition, very few are in French or English, most are in German and German and I make 2!
Example for 5-pulse comfort indicators;
Normally the channel is: (2) - Turn signal control
But I only have IDE00…. Or ENG…. And nothing that seems to match.
Help,
Help
Best regards
Apologies - I had not used my laptop for 269 days so had many Windows updates to complete. My go to location for
coding is here:
VAG Fahrzeug Codierungen, OBDAPP automatisierte Fahrzeugcodierung, Fahrzeugfreischaltung vollautomatisiert, VCP Codieren, VCP SYSTEM, VCDS Codierung, VAG-CAN Professional, Codierungen für Ihr Auto, VCDS Service, Codierungsservice, Fahrzeugcodierungsservice, VAG-COM, Programmierung Audi VW Seat...
www.stemei.de
Mirror Folding:
VAG Fahrzeug Codierungen, OBDAPP automatisierte Fahrzeugcodierung, Fahrzeugfreischaltung vollautomatisiert, VCP Codieren, VCP SYSTEM, VCDS Codierung, VAG-CAN Professional, Codierungen für Ihr Auto, VCDS Service, Codierungsservice, Fahrzeugcodierungsservice, VAG-COM, Programmierung Audi VW Seat...
www.stemei.de
Indicators:
VAG Fahrzeug Codierungen, OBDAPP automatisierte Fahrzeugcodierung, Fahrzeugfreischaltung vollautomatisiert, VCP Codieren, VCP SYSTEM, VCDS Codierung, VAG-CAN Professional, Codierungen für Ihr Auto, VCDS Service, Codierungsservice, Fahrzeugcodierungsservice, VAG-COM, Programmierung Audi VW Seat...
www.stemei.de
Fan Speed:
VAG Fahrzeug Codierungen, OBDAPP automatisierte Fahrzeugcodierung, Fahrzeugfreischaltung vollautomatisiert, VCP Codieren, VCP SYSTEM, VCDS Codierung, VAG-CAN Professional, Codierungen für Ihr Auto, VCDS Service, Codierungsservice, Fahrzeugcodierungsservice, VAG-COM, Programmierung Audi VW Seat...
www.stemei.de
Beep Locking/Unlocking:
VAG Fahrzeug Codierungen, OBDAPP automatisierte Fahrzeugcodierung, Fahrzeugfreischaltung vollautomatisiert, VCP Codieren, VCP SYSTEM, VCDS Codierung, VAG-CAN Professional, Codierungen für Ihr Auto, VCDS Service, Codierungsservice, Fahrzeugcodierungsservice, VAG-COM, Programmierung Audi VW Seat...
www.stemei.de
Needle Staging:
VAG Fahrzeug Codierungen, OBDAPP automatisierte Fahrzeugcodierung, Fahrzeugfreischaltung vollautomatisiert, VCP Codieren, VCP SYSTEM, VCDS Codierung, VAG-CAN Professional, Codierungen für Ihr Auto, VCDS Service, Codierungsservice, Fahrzeugcodierungsservice, VAG-COM, Programmierung Audi VW Seat...
www.stemei.de
Ok, first off, complete an 'Auto Scan' and 'Save' a log file.
Mirror Folding: (note these were both active and activated from the factory on my vehicle)
Open control module '09 - Cent. Elect.'
Open function 'Security Access - 16' and enter code '31347'
Open function 'Adaptation - 10'
In the search box type 'Spiegelanklappung' (mirror folding in german - this will reduce the number of adaptation channels when you use the 'drop down' menu)
You will then have two adaptation channels:
- The one with the text 'modus' you will need to change the value to 'by look command via remote control key' - this enables the mirror closing with remote key
- The one with text 'signalisierung' you will need to change to active - this enables a menu option on the infotainment that you can toggle on/off in the vehicle settings>>mirrors options
Close the adaptations down, check the soft reset, and click 'do it'
Indicators:
Open control module '09 - Cent. Elect.'
Open function 'Security Access - 16' and enter code '31347'
Open function 'Adaptation - 10'
In the search box type 'Blinken' (indicator in german - this will reduce the number of adaptation channels when you use the 'drop down' menu)
You will need the channel 'ENG141649-ENG116587....'
Change the new value to 5
Close the adaptations down, check the soft reset, and click 'do it'
Fan Speed:
Open control module '08 - Auto. HVAC.'
Select function '
Coding - 07'
Go to 'Byte 11', and check 'Bit 6 - Activate Blower Status Display in AUTO-mode active'
Close and 'Do It'
Beep when locking/unlocking:
Open control module '09 - Cent. Elect.'
Open function 'Security Access - 16' and enter code '31347'
Open function 'Adaptation - 10'
In the search box type 'Akustische' (this will reduce the number of adaptation channels to 7 when you use the 'drop down' menu)
I didn't have time to complete this fully, but I would follow the stemei.de link and broadly follow the directions there for adaptation channel options.
Needle Staging:
This did not work on my vehcile with revised digital dash - I was able to change the long
coding, but this didn't do anything. The module was then difficult to recode back to the original settings.
Instructions are here though:
Open control module '17 - Instruments'
Open function 'Security Access - 16' and enter code on the pop-up window; mine used the second code, but yours may be different.
Initially I used the adaptations using 'staging' but this returned a 'channel not found'
I then used the long
coding, 'Byte 1', and checked 'Bit 0'. The
coding was accepted, but as above, this did not work. Ultimately, needle staging is to provide confirmation that the mechanical instruments are functioning correctly, whereas this is not required on a digital display.
