valve

ive just recently purchased the splitter forge d/v and i read a topic that was posted recently and there was a link which spoke abit about the d/v 'it didnt sound good' now was this a good buy or not because forge which i thought were very good, they recommend it. If its crap id like to no...

:confused:HAS ANYBODY FITTED A DUMP VALVE ON TO THE INTERCOOLER PIPE I HAVE SEEN A VID ON YOUTUBE AND WOULD LIKE TO KNOW IF ITS WORTH DOING IE WILL IT BRING FAULTS UP OR DO I JUST GET A DIRECT FITTING DV

For anyone that doesnt know 8v'rs this is important and can prevent a whole load of running issues. On the 8 valve engines you need to time up the distributor pulley (edit; i believe this is only engines with the dizzy on the front ie not on the top/side of the engine) also, as well as the...

HI Can anyone tell me how to claen or replace the egr valve on a petrol 20VT FR

Hey, I need a EGR valve blanking plate for a AHU engine, does anyone know where I could buy the plate, is there anyone here who could make one ? Thanks

Right guys got my new maf fittted today along with my cai from the bay, but to no avail it still boosts in 1st, go into second get up the revs and bang it feels like someone has just stamped on the brake pedal, into 3rd and it just revs all the wayround with no boost? Any ideas? With...

Just removed my SAI, N249 & N112 valves today and thought I'd do a little guide :D What you will need: 330 ohm 10W resistors * 3 (from RS Components clicky) Vac/boost pipe - about 0.5m (from placed like Forge) Combi valve blanking plate (you can get them from Forge but I made mine...

Currently on my Cupra I have the Forge 007p Fitted, But I wanted something that would make a bit of noise, and still be good for the car, I had a baileys one on it when i bought the car, but that was rubbish, Ive been told i may need a blow off valve for noise? not sure though. any Suggestions...

Just got me a new N75 J (034906283J) but i noticed the in/out plastic legs are different lengths if I keep the electrical connector facing the same way.. I.e the metal case is inverted. Are these fitted in the same orientation as the Standard "F" valve. or am I keeping the pipe lengths...

just ordered new dump valve from forge (oo7p). done some research on here to see what the best one is to go for, good advice on here ive got to say :) are these easy enough to change over?

Hi all what best dump valve for a cupra 1.8 thax

hi all i,ve got a scooby blitz dump valve with trumpet on side. if i trimmed trumpet to fit in pipe would it work as recirc any help would i be gratefull

Looking at buying myself the GFB Hybrid Dump Valve, and just wondering if anyone else had these? Look the same as the Forge Split R Heres the link to it, http://www.gfb.com.au/index.php?parentid=products&option=products&sub_option=bovs&sub_sub_option=hybrid

Hi guys and gals!! I was wondering if anyone had any ideas on this, I was thinking of installing a dump valve on my LCR 210 03 model, but I have heard that they can stuff up the turbo!! Is there any truth in this? And is there a specific dump valve that is particurly good on the LCR? Cheers...

Opinions? more info and prices here http://www.velocityfactor.net/wwwroot/Scripts/prodList.asp?idCategory=1680

I've done a search and I have found that there are a few ways off doing the EGR valve mod/bypass and not get an ECL. Mine is a 2004 Leon Cupra 150 TDi so I know the ECU does a vaccuum check on start up and as I have a bung in the pipe at the moment I have a permanent ECL present. One of the...

can you bypass the N75, I had my car remapped and he said you can bypass it as mines playin up but I cant find any links or threads?

I have just got a 007 diverter valve and have fitted it the same way as the original one. Have been reading other threads and have noticed a lot of people turning it round, so pressure is in the bottom and side pipe goes back into the air feed to make the valve louder! Is this correct and is...

Hi everyone! Recently I've been having this fault, but is able to "cure" it by clearing the faults. 17705 - Pressure Drop between Turbo and Throttle Valve (check D.V.!) I've only noticed this at temperatures around -2 - +4 celcius? What could cause this? The car is remapped, but have...

Hope someone might be able to help me with this problem. The car was running great up until a few weeks ago then i was hitting peak boost .8 bar then it levelled out at .7 bar.The car then started to feel as though it was towing something and it was being held back and boost is peaking at .3...