SEATCUPRA.NET Forum merchandise

  • Guest would you be interested in CUPRA or SEAT valve caps? let us know in the poll

  • Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.

vacuum

  1. D.K

    LCR Replacement Brake Vacuum Hose

    Just been looking through Forge's website and found this http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190202&product=FMTTUHOSE Has anyone fitted one If so where does it fit onto the manifold ??? Is it on the under side of the manifold ???
  2. cuprakris

    vacuum tubing

    hi all i was just wondering what size vacuum tubing would be best to do the vacuum hose's on my leon cupra. thanks kris
  3. truss

    vacuum hose clips

    Im wanting to start on my engine bay this weekend, and ive got me some 4mm vacuum hose. what sort of clips should i use to hold them on? Also, what other hoses can be changed easy enough, just to make it look better?
  4. BHP Addict

    Vacuum Gauge and Boost Gauge differences?

    Before you all suggest :search: I am on my phone and it shows 1 of 112 pages with the search link somewhere around page 48 with no way of jumping pages lol I need to know the difference between a Boost Gauge (PSI) and a Vacuum gauge (cmHg)? What does the Vac gauge connect to and would...

  5. layout of boost vacuum pipes needed

    i have a limp problem on my toledo, which has being goin on for a while now, with alot of parts replaced. i removed the pipe running from actuator and it has left me no limp mode. anyway, was thinking i better check the pipes are connected to the right valves as the previous owner could have...

  6. vacuum hoses on the LCR

    Is it possible to get hold of an "map" over the vacuum hoses/pressure hoses of an LCR? I found a picture on the net, but i think is from a TT and it not that good a picture...

  7. TDI 110 vacuum system and other diagrams

    A while ago I was trying to trace a vacuum system pipe, to see what would happen if the EGR valve vacuum feed was disconnected and not properly sealed. I found there were no diagrams of the vacuum system as a whole, just odd bits of it here and there. The only thing left was to go out with a...
  8. richybigman

    Brake Vacuum hose

    Hi, Has anyone replaced this hose: http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190202&product=FMTTUHOSE Fitted on the left hand side of the inlet manifold on a Cupra R? It looks like the original hose is attached to the one above it so is there a special way of fitting it...

  9. vacuum pump help!

    my central locking doesnt work and the pump keeps buzzing so quessing thats what causing it but anyone know how to get to it? thanks
  10. warren_cox

    Want to add a boost gauge to your 2.0T FSi?

    http://www.awe-tuning.com/pages/shared/part_detail.cfm?PMaI=3&PMoI=38&PEI=25&PP=mk5gj_20t_drivetrain.cfm&PPT=Drivetrain&IL=tsiboosthose AWE tuning have decided it's time to give 2.0TFSi owners access to a boost pressure outlet for the addition of boost gauges. Couldn't find a UK priced...

  11. EGR vacuum pipe disconnection

    having read about the many probs people seem to get with the EGRs on their cars i thought i'd try removing the vacuum pipe off the top of the EGR unit on my leon mk1 as recommended on one thread. the persistent flat spot between 1,500 and 2,000 rpm is now gone. is there any problem with...
  12. Breezapom

    Vacuum Hose

    i have tried search but none of the results dont seem to give one answer do i need 3 or 4 mm hose? just my vac to dv wont fit with the forge dv :ban:

  13. Silicone Vacuum Hose [ help ]

    hi i have seat leon 4 and i want to change all the vacuum tubes to a silicone . i found this products - http://stores.ebay.co.uk/ZENARacing_W0QQfsubZ3544148QQtZkm but i dont know what the mm i need ? tnx

  14. Safety Recall - Brake Vacuum Pipes

    Anybody else get one of these? I was surprised to get anything like this for a 10yr old car. 10points to Seat for customer care! :thumbup: Thought I should post it here to let you guys know.
    • mac83
    • Thread
    • brake pipes recall safety vacuum
    • Replies: 23
    • Forum: Arosa

  15. Boost Gauge - How to get vacuum hose into car?

    I know this has been asked before and I've found some vague pictures. But I just had a look for the grommit that goes from the engine bay into the car and can't really find it! I can see some wires going into the car downwards just behind the passenger-side suspension strut but even if that's...
  16. sirjimalot

    Boost pressure and vacuum

    Just curious to know what boost people are running and what theirs is vacuuming at..

  17. Vacuum hose replacement

    This is probably a long shot, but I don't suppose anybody here can help identify a vacuum hose for me can they?! :-o I'm after the part number or suggestions for alternatives... The hose runs from the underside of the inlet manifold (the right-hand one of two hoses, the left one being alongside...

  18. Vacuum hoses - diameter?

    Anyone know what the internal diameter of the vacuum hoses are on the Ibiza? I know I could measure mine but would probably get it a millimeter out or something and blow up the engine :p I feel like getting some Forge tubing and brightening up the engine bay.

  19. how much vacuum on the BOV?

    Hi everybody! LED boost gauge is almost done, but how much vacuum is there on the BOV? I know the LCR's boost with 0,7 bar, but what about the vacuum? The sensor dont like under -1,0 bar :o( Will the vacuum increase when it's chipped? /Best regards
  20. silverfox

    Vacuum hose

    Can anyone explain to me where the small hose that comes off the top of the DV goes to? It's a Leon Cupra 20VT. I had to reverse my DV as the hose split just where it bends before meeting the DV nipple so I had to cut about an inch off the end of the hose. There wasn't enough length left in...
Progressive Parts, performance parts and tuning specialists
Top Bottom