tip

Alright people I know someone with a brand new forge tip for a LC They brought the hose for there engine which was AGU Mines AUQ Now forge list two different pipes, which says to me it won't fit. Any ideas of the differences between the two? Can you make it fit?

http://cgi.ebay.co.uk/AUDI-TT-S3-LEON-CUPRA-R-INTAKE-HOSE-225-Bhp-SILICONE-R_W0QQitemZ330395711468QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item4ced1e77ec found it on ebay and they seem a decent price, or is a case you get what you pay for?

Hello All :) Well, yesterday was the end of an era for the tdi as she got part exchanged for my LCR, sad to see her go, but guess it was time to move on. Here are a few pics of my new LCR :D Inside the showroom After picking the LCR up :D please excuse the dirt already from britains...

Hello there, I noticed that when I drive my car using the tip tronic gear, it takes ages to shift down to the lower gear level; that's a bit annoying when you need to reduce the speed to avoid excessive use of the break. can anyone please advise? Thanks a lot

Ibiza cupra ayp forge TIP takes ibiza maf housing im running a larger maf housing which is 3" and just fits into the tip very tight looks like it may pop off, can i change the tip for a 225 model etc or cut the tip down and put in a reducer? thoughts on this please Neil

As per the title really. Me and a friend fitted the forge TIP to my Cupra a few days back, and where as before it was peaking at 1.4 / 1.5 bar (its running a Revo stage 1 map) it now refuses to go past 0.9 bar and is noticeably slower / less torquey:( Suggestions? All vac pipes seem ok and...

Has anyone got the dimensions of the cupra oval exhaust tip? cheers

hello all iv been looking into getting a blue flame back box for my LCR but in the item description is says..Manufactured from T304 grade stainless steel with a 6.00" X 4.00” Slash cut with internal tip. can you get one without the internal tip or can they be removed:think: any advice would be...

did a wee quick search on this but nothing helped well if you rev my car not underload the tip sqeezes together and if your out driving you get to abou 4000rpm then no boost and it doesnt rev much higher.... is this because the tip is sqeezing together and choking the turbo?? is it jst...

Spent a few hours this weekend fitting a THS TIP. Would of been a lot quicker but I spent ages trying to align the TIP but it just wont reach the air box. It is to short by around 25-30mm, if you include the MAF housing I'd say it was around 40-50mm short. Has anyone else experienced this...

Basically, the wife has offered to buy me something for the car for Xmas. I did mention a remap or coilovers and she laughed... then said no. Just over £100 to spend I think. My ideas were either a Forge TIP or 312mm front brake set-up. Thoughts?

guys, where can i get a decent TIP for a fair price???

Hi, as its a dry saturday for once i washed the car, Coming up to the exhaust the tip is rusting all over the lip. Any one else got this problem? and how do the other makes fair? Im a bit pissed off its only been on 3-4 weeks. It does clean up with some autosol but you cannot get all of it off...

hi all i have just got my forge tip and am having trouble removing the old tip i have managed to take out the rubber section but the alloy section that goes into the turbo seems to be be behind a stiff/metal pipe that i cant find the end of i have heard this should be a relatively easy...

I've trioed a search but didn't really find what i was after. What size (ID) is the small end of a forge tip? the end that fits on the turbo is the one i'm after please! Mucho Graci!

does anyone have the dimensions of there homemade TIP?? and the sizes of the parts that come out to the dump valve and stuff???? cheers stuart

Hi can anyone confirm that a Forge tip will fit the 210 LCR aswell as the 225 one? Thanks.

Im having trouble with my forge tip i have one for my ibiza 1.8 fr but now that i have changed the turbo for a hybrid ko3/4 the turbo end of the tip is 5mm to small, i would like to know what tip i should go for now im thinking that the LCR Tip will fit but then looking at the two the other...

Got round to fit my autobahn88 TIP today. The fitment overall was very good and got on quite well considering I have little experience working on cars. However, on the turbo inlet, the hose wasn't cut perfectly square so there is a small gap on the top side. The hose still goes well onto the...

I just emailed THS and they are currently out of stock of this item. Apparently they havent had much interest lately and are contemplating not making another batch :cry: Is anyone thinking of buying one in the next 3 months??? I'm hoping to get some interest in this thread and show them to...