throttle

Hi Guys, I had throttle problem , It was shaking and turning off so I decided to hook elm327 and Checked codes and there was no pending codes or permanent codes. So I decided to check youtube and came to this app on Google Play "Throttle Reset OBD2", at first I thought it was fake but after...

Has anyone cleaned their Arosa's throttle body? I noticed that mine looked grubby when I was replacing the air filter element and have read some stuff on cleaning them. I understand that if I remove it to clean it, I will have to get it re-aligned using vagcom, which would mean hunting down a...

hi there would someone be able to advise me :shrug: are there any gains to be had for running an r32 throttle body on my ibiza cupra mrk 3 ?? heard people are running them on here just wanted to no the gains really cos i can get one cheap :D oh and iam running ihi turbo aswell [B)]

Right, just back from work, parked my car in the car-park for the day, and returned after work, got in, started normally. I pulled always in first, doing about 5-10mph around the car park, changed into second and then something weird happened.. I released my foot off the accelerator to take a...

My SC Sport has developed a creaky throttle pedal, any ideas?

All Had my car (cupra) put back to standard (as had a physical chip fitted) and car was running fine apart from boosting slightly too much. It would boost to about 8-10 psi instead of 6-7. Now i know my actuator was played with so put this to the correct number of threads but car still...

Just had this fault code come up, car spluttered and died. Tried clearing the code and starting it again and it just dies straight away. Is there anyway if I can test if it is throttle pedal or throttle body related? Cheers

Right, I've got a very strange problem that I need people to take a look at.. Myself and Dave (DPJ) fitted a INA mani last Sat and since then I've had a very strange boost problem. Boost is dropping away at circa 4.5k rpm then picking back up 800-1k rpm later.. At the same time boost duty...

Hi Im having a problem when sat in traffic. the cars warm, but in slow moving traffic it seems very jumpy. I try to be as light as humanly possible on the throttle but still seems to be jumpy Any ideas would be appreciated. Thanks

basically my car is idling at around 1200rpm all the time. i have checked the cold start sensor and it isnt that, then the other day i caught my foot under the throtte pedal and the revs dropped?? i then revved the car a few times and idle back up to 1200rpm. so hooked foot under and...

Apologies for the poor thread, I did have a search first ;) Any idea what size the the vac pipes are to the throttle body on me ole 8v (2E)? Think its measured on the internal dia. Forgot to bring one of the old ones to work with me for reference and im off to GSF at lunch. Cheers :)

HI, I have a '99 ibiza tdi 90 bhp, AGR engine code completely standard. Yesterday whilst driving to work at a stead 50 mph in fifth gear the glow plug light began flashing and the revs dropped and stayed at 1200 rpm which i understand to be limp mode, With The throttle pedal becoming...

Anyone know how to reduce the noticeable throttle lag on the 1.6crtdi? if i'm quick enough i can floor the throttle and get my foot off the pedal before the revs even start to rise. At first i just put it down to turbo lag, but even when it's on boost there's maybe .3-.5 of a second delay...

My Leon Cupra 1.8 20v Turbo lost its throttle the other day, has been in the garage & after speaking to some specialists & reading the fault codes (P1631 Accelerator Pedal Position Sensor 1 Signal Too High & P1634 Accelerator Pedal Position Sensor 2 Signal Too High) . The throttle pedal (comes...

as above :D

hi, i have a 05 plate seat leon 1.6 sx. the car starts fine but there is no power and it keeps jerking...iv had the vag com put on it many times and these are the codes that come up P0106- manifold absolute pressure/bard sensor range/performance P0170- fuel trim (bank 1) P0222-...

Following on from Alps Pacino's thread (Cupra ihi track car project) does anyone have any info regarding converting a Cupra to allow a manual throttle cable to be used. The thread mentions that for one the pedal box may have been changed. Would the lesser models hold a suitable pedal box? I...

Morning all, sorry to ask, I have had a search but just wanted to know there is a small black sensor that plugs in just before the throttle body with a torx bolt. What does it do and could it mess up the throttle bodies ability function. STILL trying to stop my fault codes for lambda popping up...

Hi guys, Noticed a clonking noise which sounds metal to metal mainly when driving in the wet as the wheels spin in 1st. I think its the rwar engine mounts / gearbox mount. Sound about right? Anyone know the part no? Thanks, Dan

HI all, Been looking into a remapped ecu for the auq from superchips, can anyone realign my throttle body if i buy it? Infact i think its the same ecu advertised in the for sale section on here. Its also on ebay....