stick

Hello, I want to replace the plastic housing around the ball in my gear shifter but can’t seem to figure out how to release it. Its an Ibiza 6j 2010 1.2tdi. I saw this video regarding mk5 volkswagens, and it says to press in the 4 release tabs, but mine does not have those tabs. the piece I am...

Has anyone else’s gear stick gone like this? It’s a 70 plate and considering it’s automatic I am quite unhappy with how much damage has been caused. Is this easily removed and replaced? Worth going down the warranty route? because surly it shouldn’t go like this, only done 22k miles.

i took my car to the car wash and it wripped of the "L" from the boot, so now my car reads EON, its practically a bit of a joke as i work for EON. i have the "L" but dont know what to use to stick it back on, without damaging the paint. any suggestions would be appreciated. cheers bash

Just picked up a 51 plate ibiza cupra. Immaculate with one owner, completely standard and a folder full of receipts. The only thing thats annoying me at the minute is the gear stick doesnt centralise so going from 2nd to 3rd is a bit annoying as there is no assistance as such to get it...

Hi guys Help!!! I've currently got 18" Audi 9 spoke RS4/TT Quattro on my Cupra TDI but am seriously debating whether to go back to 17's. I was given a lift by mate in his S4 the other night and it seemed so much smoother and not so crashy as mine, it had the original 17's on it which had...

So I deceided to change my standard gear knob and gator, dirt cheap off ebay but what a pain in the arse to do the gator...

hi people does any one no the part number for the black square plastic clip,that clips and sercures the gear stick gater to the to the top of the gear stick housing? rang my local dealer and they said i had to buy the gaiter as well? and gave me a price of £80? which i am 100% sure they have...

I have just put a new gear stick in my Ibiza but the clamp that hold the knob tight just won't go any tighter so the stick is stil moviving, is there anything else I can use and where can I get it from.

hi, ive got a 1.4 on a T plate and want to know if i can take the gear stick off because i want to shorten it. thought it would be easier than doing it in the car. any sugestions?

Is was just looking up the to vacuum hoses on the left side of the inlet manifold, a hose was in the way and I SLIGHTLY moved the oil stick!*KNACK*.. Ohh nooo... My damn oil stock just break into two pieces! All the way down at the stud it goes over! Managed to get the rest of the stud, find...

I did a funny gear change the other day and since then the gear lever has been really stiff with left/right movement and doesnt spring back to centre.. I assumed I have probably caused something to slip in the gear linkage, or maybe broken a bush? The other thing is the car seems to think...

Have anyone experienced the piston was sticking in a forge 007p ?

So I went to have a look at a 16v cupra gti in fareham today, the car was pretty spot on apart from the amount of travel in the gear stick and the vagueness of the gear changes. Didn't know whether this was a common thing or if the gearbox or linkages needs doing? Thanks guys

Hi guys, This morning I was reversing out of our flats car park and noticed I was quite close to a black Avensis. I drove off down the street and noticed a guy looking at me in a strange way. As I drove past he looked at the back of my car and it looked like he was taking my reg down. I then...

Does anyone know where i could get a quick replacement from as my brothers has snapped on his TT (I presume it will be the same on all BAM engines?) Is it all one piece or does it spilt half way down? if it doesn't split would it need an oil drain to replace it?

I dont know if this was the same on anyone elses but the person who stuck the cupra letters on mine was blind. washed the car today and noticed the 'U' is a good 10mm higher than the rest of the letters. i was laughing at a friends K1 the other week as his were all slightly rotated at...

I think I've searched/read all the threads here about the notchy gearchange which seems to be common on the Leon, especially into 2nd, but not seen any mention of what I'm experiencing. I have this notchiness but also a sort of plastic rattly noise at the same time, almost as though there's...

When i had my alloys powder coated when i first bought them i obviously had to remove the centre caps, which are a thin metal with a thin layer of sticky foam on the back, which is not really as sticky any more. I want to put them back on as i've been using cheap porker ones in the meantime...

Will a golf mk4 gear stick fit onto a mk4 ibiza? also what other stuff from a golf interior will fit into the ibiza I know about the interior light, but thats about it

The pipe that holds the dipstick in place has snapped on my gti valver. Any ideas where i might be able to get a replacement and how much it will be? Also, is this a hard part to remove & fit? And finally, is this pipe the same as every other mk2 ibiza or is it specific to the ABF? Any...