spacers

Hey ive got a ibiza cupra 20vt and want wheel spacer on the rear would it be alright to use 8mm each side with standard wheel bolts without hubcentric spacers as found on here...

Do Hubcentric wheel spacers put any extra loads/stresses through the wheel bearings and shorten their life span? I am thinking of fitting either 15 or 20mm spacers to the rear axle of my standard wheeled Ibiza Cupra. Thanks

as you all well know ive put fk coilovers on my petrol cupra was wanting to get some spacers for the rear what is best 10 15 20mm ????? more/less :confused: found these on e-bay would i need longer wheelbolts ...

when i was telling someone about the rubbing problems i have been having with my car, he suggested getting the camber checked and putting spacers on the front. would this work, i also got told that this would help bcos its pretty low, but im not aware of fitting spacers to very low cars, anyone...

As I'm going to forge these myself I need the exact radius/circumfrance of the H@R or Eibach 15 mm ones for the rear wheels + the size of each of the 4 holes in it . Anyone know the sizes andqor care to help?? Thanks Noam

sorry i know this is a common question? but i searched and couldn't find the answer i was looking for. i have just been on euro parts and looking at getting spacers.... 2 questions really!! 1. do you normally only put then on the back or both? 2. i have seen some spacers on there (eibach) it...

Hey, thinking about getting spacers for the rear of my LCR, anyone got some before and after pics available, would like to see how much the spacers (obvisouly depending on the width) fill out the arches.

Hi guys, done a quick search before anyone comes out with that! I'm putting 5mm spacers each side on the fronts with standard wheels. Will I need longer bolts for this small a spacing? cheers

Hi ive recently purchased an ibiza 20v, must say very impressive car, Moods have already bin put in place. Sparco strut brace in the engine bay, engine polished, baily dv30 recirc valve, green air filter, Lower engine and rear strut braces on order from germany. Nomad twin A-pillar gauge mount...

Right then, having gone back to my standard wheels, they look too far in the arches and so want to purchase some wheel spacers for the back and maybe the front......? I know Badger5 do 15mm rear ones for around £90....But... Can 20mm spacers be fitted to the rear and what size is safe for...

i have put some fox racing multispoke alloys on my mk2 1995 gti 8v the bolt holes line up sound, but the flange on the hub is too small so the alloy doesnt actually sit on it, it floats. this means its almost impossible to get it on central, anyone know where i can buy a set of 4, and do i have...

what sort of wheel spaces should i get for my leon cupra running 16" wheels do i need longer bolts or will the normal ones do do i put spacers on the front and back or just the back :confused:

Right ok i dont know much about spacers apart from that they widen the track of the car.. so what size do i need that arnt too wide to widen the track of a facelift (2006) FR 20VT.. what price would i be looking at and whats a good make?

hi, not for sale yet but I have some 15mm rear spacers that I put on my car a few weeks ago, having to sell the car now so just wondered if anyone would be interested. I will officially put them in the for sale section in a couple of days. Interested? by the way they are eibach...

Just wondering what material the majority of spacers are made from, as im going to knock some up at work. Cheers.

Thinking about getting some spacers on the back of my Cupra but im not sure what size to get. (Bearing in mind i will be still using standard suspension.) What size has anyone else used? Thanks.

hey guys looked over the site but still looking for a bit of advice. im lowering my leon cupra soon on fk coilover, do i need to fit spacers to so my alloys look fitted better(standard 17") i read 5mm at rear 3mm at front but was unsure if this was only for a cupra r. if anyone has used some...

how much an where for spacers to move standard wheels out??

ok finally going to get some spacers for my 1.4, but with other issues money wise recently i have not been able to complete my plan of new suspension and so on anyway my first step down that road is to get some spacers, saw a thread in the mk4 board with spacers including longer nuts as well...

Hi, does anyone know where to source cheap spacers. I know it is important to have hubcentric ones but just wondering if anyone knows where to get them cheaper than £85? Cheers