spacers

hey guys. was thinkin about puting some spacers in the back, jus wondering about the cheapest/safest ones and wat amount do you all use? want it to look good without putting styrain on anything. thanks

what are people running on the back to get rid of tuck? i got like 5mm, but was thinking either 15 or 20mm, but people have said 25mm? i don't really wanna go that wide! pics would be great too if possible brummy i do like your width, was that 15mm with the ET35 on the RA's? thanks boys!

hey wonder if anyone can help. have a 1.2s mk4. was going to be buying my alloys and new custom zorst this month but the exhaust manifold is now apparently knackerd. 470 to replace so im now going to try and do the less expensive mods while i save up again. where can i buy spacers from and are...

Hi Guys, Need a bit of advice, have done some searching on here but cannot find what im looking for. I have a 2004 LC Leon 180 and ET45 alloy wheels which rub on full lock, would putting spacers on make this happen more or less? Only get slight rubbing when on full lock or when I have...

to run standard cupra 16" alloys on my car but its low on coilovers? heard ill need spacers or itll scrub? do i need them front or rear and what size?

finally got my car back on the road after all the mods, not sure if it is the spacers causing this but has anyone else noticed any rubbing due to the rear spacers? either that or its coming from somewhere else? any ideas?

right guy's before you tell me to search, i have done, ive been looking for about an hour now, i can remember a while back Hooch said that you could get some 20mm hubcentric spacers for around the £40 pricemark. im just wondering if anyone knows the website or can remember themselves where...

Thinking of getting some of these for the rear wheels of my Ibiza. Do they improve the handling much (if at all)? Given they're moving the weight of the wheel away from the centre of the hub, has anyone experienced wheel bearings failing more frequently with these fitted, and are they any...

I dislike a car that understeers so I tried to induce a degree of oversteer with the following mods I have set up my LCR with the following. KW matched springs and shocks lowered about 30mm from stock S3 front strut brace R32 front ARB 28mm rear ARB set on the stiffest setting Polly...

hi, have had my 15mm wheel spacers on for about a week, my passenger side rear wheel appears to be squeaking. Could this just need more copper grease or is it a sign my wheel bearing is going/gone?

Im looking of fitting Standard MK3 wheels for my ibiza... i have some 17" kahn jobbies on at the moment... but i want to go for the tinkered with OEM look... Basically i want to know which width of spacers to go for... 15 or 20mm If it helps. i will be lowering that car on coilovers at...

Found some alloys that I really want to put on my LCR but they are a 50 offset. Alloys are 5x100 18x7.5 with a center bore of 56.1 Thing is I can put 15mm spacers on to fix the offset but would prefer to get hubcentric spacers if possible, however the center bore on the LCR is 57.1. Is there...

Hi, many ppl have told me to get 20 mm spacers for my 07 ibiza. Iv been looking and there are Hubcentric ones for £90 or just cheaper ones for £40, any advice?

thinking about either 15mm or 20mm spacers on the rear but is 20mm too wide, my card already lowered a fair amount of standard alloys. so is it too wide i ask :D?

hi id like my FR to look a bit fatter but know nothing about spacers. looking at the Forge website i think im interested in 10mm or 16mm will 16mm be too much? can i just space the back wheels and it drive ok? can i space the front 10mm and the rear 16mm? Just really want to know how these...

hi, am looking for spacers for the front of my leon fr 150 tdi, anyone know any good places to get them, just looking for 5 - 10 mm hubcentric ones! just got 18" rs4 wheels and they rub the front shock! cheers!

what size hub core do i need? found some hubcentric 57.1 is this about right? "Multifitment 5X100 - 5X112 PCD To suit 57.1mm dia hubs" egay number 270453728520 thanks, adam

I've got some porker calipers for my FR+ tdi. If I jack the car up, remove the front alloy, rest a caliper on top of the disc and then attempt to refit the alloy, will this give a good idea whether I'd need spacers? I've got the baby 17inch Cupra R alloys. Also can I jack the car up...

Thanks to everyone on here who helped with the original thread a year and half ago :lol: and the thread i had the other day. but the spacers arrived yesterday and after a bit of a mad/busy evening as i had loads to do and the seat wheel bolt bar thing was too big for the holes in the spacers...

right. at the mo i'm running 30mm rear spacers and the back end looks just right with standard wheels. problem is, i wanna run wheels that are ET44 and 8.5j I intend to get 20mm and 30mm thick adaptors made for them, but this means the rears will tuck in, rather than getting silly size...