spacers

What size spacers and wheel studs would people recommend getting? I'm running the standard Cupra R wheels and have been quoted £200 for a garage to roll my arches, which I will be having done at some point...So when time comes, I would like some spacers to make the wheels sit pretty flush with...

Hi Everyone, I have 2018 Mk3 5f 1.8tsi on AP 40mm springs and standard 18" wheels and wanted better fitment does anyone have any recommendations for what mm spacers i should use with the 40mm drop, if you have pictures i would love to see them let me know what sizes and where you got them from...

Has anyone fitted spacers to their FR that has the standard 17" wheels, if so any suggestions as to the width that can be fitted. I've done some rough measurements I as my car is lowered I'm suspecting that 10mm F+R is all I can safely get away with, 15mm may be possible but extra risk. THanks

Saw some sets of spacers in a shop the other day and wondered if these are just to move the wheels out and fill the arch's or if the help the cars handling whatsoever?! :confused:

Went to fit my R888's this afternoon, placed them upto the front hubs and the tyre is sitting on my coilover! [:@] Went to get a 3mm spacer and guess what isn't enough :censored: So once I accepted that I wasn't getting the front wheels on I went to try the rear to find that the wheel...

Forge are cheaper by about £50 on the 10mm spacers, does it really matter what ones I buy?

All in the title! Cheers lads!

Hi, Anyone out there got a picture of their LCR 225 with wheel spacers fitted??? Using standard wheels & sus etc 15mm rear & 10mm front OR 15mm rear & 0mm front OR any pics with spacers fitted on a LCR 225 will do ;-) Cheers all

Hiya peeps, Is there any advantage of using wheel spacers with the standard LCR wheels? Does it make the car look wider? I guess it will push the wheels out towards the archies but then would they rub? Anyone got any pics etc? Cheers gus n gals

Hi all, Just wondering if any1 could tell me the bore size etc for 20mm spacers for a Mk4 ibiza Cupra TDI? Are they 5x100 & 57.1mm centre bores? Thanks Mark

http://cgi.ebay.co.uk/AUDI-VOLKSWAGEN-ALLOY-WHEEL-20mm-SPACER-KIT-AND-BOLTS_W0QQitemZ140382043611QQcmdZViewItemQQptZUK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET?hash=item20af6bfddb Anyone know if these would be suitable for an LCR with standard rims?

Hi i have 5mm wheel spacers on the front of my car, are the original bolts ok to use?

I appear to be getting it all wrong recently. I ordered FK Spacers direct from FK in germany and they've arrived. I was super excited and I picked them up from my parents last night, Drove home and was worried somewhat about the bolts! Upon getting into work today and prior to setting out...

Hi guys Looking to get some spacers for the rear of my ibiza pd130 what size do you recommend. im running 17inch vrs spiders at mo and they is quite a gap!! Will this affect the handling?? If anyone knows where i can get some with longer nuts that will be great!

Hi guys, Thinking of getting some spacers for the front and rear so the car has a slighly wider stance. After searching previous threads i'm thinking 10mm all round (20mm total track widening). Would this be correct ? And wheres the best place to get the spacers and longer bolts ? cheers

Right, being an x mini owner i appreciate good handling. Now the rear on the ibiza is something pople mod with spacers, now i am not a great fan of spacers in general. However i notice the Fiesta ST owners space the hub out instead for a very low price of £25. saves money and also widens...

Think this section will be ok. Anyway I picked up some 25mm aluminium wheel spacers, my mate just rang me and asked if I had aluminium bolts to go with them? As steel bolts are stronger than aluminium, and as such, would ruin the spacers, and potentially make the wheels fall off :rolleyes...

hey guys, after realising my back end wasnt spaced so well i decided to pop down to my local maccess and get some spacers. me with no newly found 10mm spacers wasnt very happy, so reading through some threads found that people use 20mm. now my question is, are the H&R hubcentric spacers...

Anybody put any spacers on the front? Offers a full set for H&R 25mm jobbies for £120. Think it could look rather sweet. Also had a quick search, but just remind me, what size centre I would need. (57.1mm i think)

just seen this on the Forge site as I was looking for the quick shift kit http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190201&product=FMWS5 anyone had any experience of these, quality wise etc? I am sure they are great as they are from Forge, but interesting to see...