..... In progress.
I've noticed that the question has been asked alot, but the answer is usually the same.... "This has been talked about alot just use the search". The problem I've found is that when discussed in the past people say to just unscrew the bolt on the bottom of the mirror, take...
Ok before anyone jumps the gun and tells me to replace it its not the problem as Ive been through 3 coolant temp sensors in the past year.
Car is 01 Cordoba 90 tdi and the temp sensor is the one that bolts into the rad.
It reads an intermittent fault on vag com. sometimes the dash temp...
Hey People, My first post! :D
After looking into buying a reliable motor, I decided on the Seat Leon! Have had it a short time and it's been fun to drive. Was after a nice small hatchback for the local trips instead of driving my own petrol guzzling car!
It seemed to fit the bill...
Hi
Any suggestions on best price & place to get a genuine Bosch replacement MAF sensor for my ibiza cupra TDI?
Have dealt with VAGparts.com in the past but obviously they aren't about anymore, have also used AVS spares.
Any suggestions welcome
cheers
Dave:think:
Does anyone know where the exterior temp sensor is situated on the mk1 leon, as was driving this morning it was apparently -50 degres c. need to get a new one but unsure where it is situated. :think:
hi all my passenger door sensor has stopped working. where are they so i can replace or check it??
i actually locked the keys in my car the other day because it locked itself as it didn't register a door open, might be time to fix it but i can't find the sensor
im lost lol
cheers...
My Tdi sport started to read all sorts of random temps for a few weeks (on the on-board computer) and now doesn't work at all! Is it just a sensor that needs replacing? If so where is it located?
Thanks
Dont know if this will help anyone.
I have found a new way to turn off the brake wear warning light after replaceing the front brake pads on the Leon Cupra R fitted with Brembo caliper's.
The most common way is to cut the plug off the pad and then join the 2 wires together to make a circuit...
Hi guys,
I just fitted my pads today but noticed that the DS babies don't come with the sensor cable which tells you your brakes are dying. Therefore I have the warning light constantly on. How has people got around this?
Thanks
I think my Toledo is asking for a new MAF sensor, but I'm not sure what to go for. There is the Seat dealer version that isn't exactly cheap. Or there is the GSFCarparts one for £52.50 +VAT.
Or there is this one;
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140307480003
The...
Hey guys, hope someone on here can help me! Just after xmas my engine warning light came on, and after a Vagcom check I had the failed coolant temp sensor failure code. Anyway i was hoping if someone could tell me if this was something that could be done at home, or if it needs to be done by a...
Good morning all.
I have a 1999 v5 150. Recently the temperature gauge has been very erratic, sometimes reading 90, sometimes 60, sometimes 0 and sometimes in between.
The water level in the filler tank is constant, so no leaks anywhere.
I have purchased a new temperature sensor...
As I understand with revo stage 2 the rear lambda sensor is mapped out, so what have people done. Do you have to leave it in its bung.
Reason I ask is I have taken mine out from the exhaust and fitted a blanking plug. But Iv left it plugged in and just tucked it away in my engine bay.
But...
Hey man temp gadge doesnt work when the car idles for a while it will creep up i have changed the coolant temp sensor but still have the same effect any body have any other ideas?
Oh what is the thing on the radiator with the wires coming out of it?
cheers chris
Hi guys,
i know its been a common thing on the forums but ill ask everyone again.
Can anyone give me a picture where the coolant temperature sensor is pleeeeeeeease??
I drive a 2002 tdi sport 130 where the sensor is somewhere near the gearbox i think? A picture which one it is or at...
Can any one tell me which one of these MAF Sensors is correct.
They both have the same part number stamped on them.
The top one is the standard Bosch Sensor and looks the same as my old sensor.
The bottom one is a after market one but it has the wire on the out side.
Are the the...
Right Its time to get this sorted:
Ive scanned Normal Engine Mode and nothing came up..So then scanned the Abs section and this came up
VAG-COM Version: Release 311.2-N
Control Module Part Number: 1J0 907 379 AF
Component and/or Version: ASR 20 IE CAN 0001
Software Coding: 13404...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.