rolling

Anyone know of a rolling road in the North East Area? Ive bought myself a 2004 225 Leon Cupra R which i was sold as being chipped to 295bhp (i know thats not very likely indeed) but I want to know if its been chipped at all

Righty then... had a fantastic day on Saturday down at Storm's Rolling Road in Aldermaston. There was over 40 VAG cars, with 30 odd running on the rollers... Quite a few non-dervs from this forum attended too. Here's my car on the rollers: Maximum power at the wheels was recorded...

Whacked the car on the rollers today at Engine Advantages in Essex. Mods include a map of some description, custom CAI, supersrpint cat back, custom front mount and a forge 007p Made 212.7 bhp @ 4894 rpm and 244.4 lb/ft of torque at 3466rpm Quite chuffed with it really. Only other...

Just got back from motorscope with these reults: 193 and 285Ft of torque. I got 169 and 277Ft of torque when standard at Jabba. I am goin back to Jabba to get it rrd next week so I can properly compare the figures to the standard ones I got at Jabba a few weeks back...

any idea where rolling roads are as far north as possible. thanks

Just come back from Jabba. Cupra got 169.6bhp and 377nm of torque:clap: . Very happy with the results and the curve is good. Its completly standard except for green cotton filter. I will get the graph on in the next few days. Cheers

My cupra tdi is getting rolling roaded at Jabba next week. Cost 52 quid. I am hoping to get slightly higher figures than standard and then get it rolling roaded once its been revod. What do you reckon. I will post the results once its been done. Also does anyone know if you get a graph or...

I have had my cupra nearly two weeks, and i thought id would get a power run sorted just to see what sort of power shes putting out. I moved from a car with 170 bhp to the cupra, and to be honest it didt feel to different power wise except for the lag sometimes! Thought it may have been a bit...

Alright Guys. Has anyone else had a Leon FR PD150 on the rolling road. I put mine on at Motoscope (North Allerton, North Yorkshire) and it churned out 172bhp and 360Nm of torque according to them. As far as I am concerned the car is standard. Just wondering what anyone else had found on...

This was the best run of the day which I had. Problems with holding boost and the car is running quite lean. This was the only run I had where the boost held.. Now I can see where things need to be adjusted, this is the start to my future of modifying the beast :D

Went on a rolling road shootout day today with the itr-dc2 forum. Everyone made bang on thier expected results, with 5 or 6 standard cars (Accord type Rs and Integra Type Rs) all making bang on standard power (ATR is 212 bhp standard and the UKDM ITR is 185 bhp) So, theres the background...

Rolling roaded today ! Graphs ! Had my Cupra dyno'd at powerstation in tewkesbury today ! It made just under 201bhp and 244lbs ft (330nm). The current car spec is: Forge FMIC Forge TIP Supersprint cat back exhaust Twister filter Revo stage 1 I'm really pleased with that as powerstations...

Who is going down to JKM on Sat 2nd Dec for the RR day? Any ideas of start and finish times for the day? Are all the places filled? It will be good to meet some of you guys for the first time!

Anyone else who went to Rolling road day @ awesome GTI 2day?? Any of you guys in the leon's, did they leave your air con on? I purposely turned it off before mine went on to get a better reading and they switched it back on? If this was the case of everyone and they needed 2 have it on...

hi guys i had my cupra on the rollers on monday. its been remapped with forge fmic, air filter and jetex cat back exhaust... the readings were 205.7 bhp which is ok im happy with.. but the torque figures were a bit strange.. my peak torque was 277.5 lb between 2500-300rpm how ever at...

hi all. just got my car rolling roaded this morning and i am not very pleased with the BHP.... My car is revo remapped, bf full system, tip, 4bar fpr, divert valve, enclosed induction, and bigger mas flow cylinder.... 247.5 bhp 297.0 ft.lb i was...

After the :censored: news that i cant go to the Rolling Road Day at Marlin Engineering that i organised on Saturday 21st October where i was going to surpise some people with my 'extra power' i thought i would tell you all this way instead! I have got a Jabba remap on my car and its...

well as you know i had the car remapped by Will over a week ago... and the little bugger was smoking a little to much for my liking (the car not Will). so a trip back was on the cards. a week went by to quick and friday had come, time to see Will again. after a 4 hour run to wolves (traffic...

Just been on a rolling road and it seems my '01 Leon Cupra is making 171 BHP and 180 ft/lb torque. The torque is up, but why would I be down 9 BPH? I have a Carbonio induction kit, Forge recirc valve, and an earthing kit (full tank of Sainsburys finest).

this is a request for anyone that knows their stuff about the mk3 ibiza cupra that will be atending the rolling road day! basically i am after someone to have a go in my car and spend a bit of time going over it with me as i dont have much experience! trying to cure a few problems for me...