replacement

A big thank-you to Alpinewhite for actually making the guide, i just put it into more simplistic form and also Fl@pper Useful part numbers S6K2721335H Clutch Cable £27.62 S1H0721169A Bracket £3.33 S411417549 Shear Bolt £1.82 ea, x2 = £3.64 S6K2721115D Bracket £62.38 Net £96.97 VAT...

Ello all, I was wondering if anyone knew of somewhere to get replacement mirrors for the New Ibiza. Someone knocked the passenger side mirror off, breaking the bolt, and kicked the glass in on both of them. My local dealer is charging £160 (without fitting them) for the privilege of a metal...

hello all, iv just got myself a new gear knob for my LCR but i was wondering how the hell do you get the original off on other cars iv had they just screw off but i cant seem to budge this one:wtf: any help would be grateful.

Hi guys, Found this on Forge's site today; http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190204&product=FMEGRRPS Will this give me anything besides being able to fit a boost guage? Easy to fit? Cheers in advance, Ben

Ive spent the whole evening stripping my car. Full inlet system is off, the whole of the SMIC etc all being cleaned up. I am replacing the turbo and looking potencially to do it myself or most of the work. I need to know what is involved if someone can enlighten me that would be...

Hi, I need help, my horn died and i needed to use it last night:censored:. I am looking at replacing it with the Fiamm twin electric horn from halfords Please can some tell me if i can fit it without using the relay, if i need to use the relay is the horn earth activated or postive...

Thinking of just replacing the cambelt without replacing tensioners etc? This little roller was making a bit of a noise - and had made quite a mess of the cambelt (which fortunately had not actually snapped). Not from a 1.8T by the way - 1.6 16v.......

hi, as some of you may already know my seat ibiza engine died, the car is now at a garage were my friend works waiting to have a new engine fitted, i am trying to find a good condition AKK 1,4 mpi engine with low-ish mileage but i am not having much luck, so i thought wot better place...

Not sure if anybody has any experience of this - I had a replacement engine put in my Leon Cupra R back in March, about 1 and half months ago I bought a new set of Goodyear Eagle F1 Assymetrics for the front of my Leon. In that time I've done about 3,000 miles and it's in need of new tyres on...

I have suffered from petrol fumes coming in through the vents with the problem being traced to a perished/split breather pipe under the bonnet. I just recently replaced the hose shown below and have only done about a thousand mile or so before the problem reoccurred. Does anyone know of a...

Hi guys, Apologies if this has been asked before, I've done some searching and can find some info, but could do with a bit of help! I'm looking at options to replace a dead AMK engine in a Leon Cupra R (melted piston and head from overheating and running without water). So with current...

Has anyone on here had there steering wheel covered in leather, and has anyone got a spare wheel they would like to sell to me so i can get one covered and not go without a wheel, on that note i couldnt find a guide on what to do to remove the wheel, please,

Well i had the lcr for about 7mths and it was a very good car in everyway but my love of cosworths took over yet again lol So on sat day i went and px'd the lcr for this. Not to everyones taste i know but ive had cossies since i was 18 lol now 29 so all...

hi guys just looking into a friend AUTODATA TIMING BELTS manual with engines from 1997-2007 find out a bit different time and miles when to change cambelt on AMK and BAM engine code:confused: Is not listed nothing for Leon Cupra R ,is just on Cupra. Lookink into Audi S3 and TT as it written in...

hi, i've got a 2001 leon cupra and the near side/outside drive shaft gaiter has split and needs replacing for an upcoming mot. has anyone got any info about how to do this as any help would be great, thanks.

The glass & casing on the drivers side wing mirror on my Leon Cupra was smashed today , does anybody know of any good replacements at sensible money.It does`nt matter what style , but mine are electric/folding

did try and do a search for this but couldnt seem to find anything. going to be getting my car resprayed soon and as my pertrol cap is broke at the hinge, currently perflexed it back together. was wondering how easy it is to replace one. had a quick look at it today but cant seem to figure out...

..... In progress. I've noticed that the question has been asked alot, but the answer is usually the same.... "This has been talked about alot just use the search". The problem I've found is that when discussed in the past people say to just unscrew the bolt on the bottom of the mirror, take...

Hey peeps, well i've moved away from the VAG scene altogether, decided rather than spanking 2k on engine work on the Ibiza (that id never see again) I'd go for something slightly more 'sensible'. I imagine its not to everyones taste but here's some pics: (comments welcome either way)...

Hi! I've recently discovered some issues with my remap, high lambda values to be precise(0.950 across the whole boost range!) I've discussed with the remapper and now I'm fed up with all his explanations and future plans!![:@] I want a NEW remap at a PRO! I know there are alot more cupra...