pressure

I have a permanent TPMS error: this summer my leon 2.0 tsi went out of battery, when i changed the battery everything worked again but the TPMS system. I can't reset the tyre pressure because the menu is greyed. You have any idea to solve this ? I thought it could be a fuse but i can't find a...

Hi everyone, I changed my 15 inch wheels with 16 inch ones. My car only has placard for 15 inch wheels with 185-65-R15 tires. Where ı can find other pressures for other wheel and tire combinations?

The Formentor doesn't come with a TPMS for actual readouts of pressure, but instead i guess it uses the ABS or suspension to gauge if the tyre pressure is off. The other day after going through roadwork I found a screw in the tyre, wen't to a tyre shop immediately and brought my little portable...

Hi I’m looking at getting new alloys for my Seat Leon Mk2 FR CR170 and was wondering how to keep the tyre pressure monitoring? Will it just work with new alloys or do you have to transfer the sensor over or something? Has anyone changed there alloys on this model and know what the crack is?

Greetings, is there a way to check your oil temp or pressure, either by some app or somehow on MFD, would be really cool to see your normal oil temp difference while crusing and flooring it.

Just need advice on tyre pressures for 5dr cupra please as the sticker on door seems to be for different wheels size

I'm having some issues with my 1.9tdi 2010 Leon. It has started cutting out when the throttle is shut and the car slowing down. It won't re start until the fuel system is bled (removing return pipe from HP pump to filter) or as the RAC guy did, spraying easy start into the inlet. I've replaced...

Hello guys, As the title states, what should be the oil pressure on a rebuilt engine with the original oil pump on a 5w40 oil 500miles into break in @ 100C oil temp and 90sth water temp during idle? The engine spun a bearing if that matters.

need a bit of advice, if fitting an electronic gauge for the oil sensor will i need to buy any sensors/sender to make it work or do i just connect off one of the wires on the sensor? thanks

I've got a pressuer washer, not one of the more powerful versions, but still handy in getting all the grub loose prior to scrubbing it down. My normal routine for a quick wash is: blast down the car with the pressure washer use the 2 bucket method with autoglym shampoo rinse down with the...

OK so after having no air con through the winter, I'm now starting to want to get it sorted... The error code is as per title - 22.1 A/C Refrigerant High Pressure Switch, static open The radiator fans do not come on when the air con is turned on on the climatronic unit which I have seen...

Hi there, This is one for the Cupra/FR TDi peeps. I know this is a Seat forum but this is a query relating to my mk4 Golf GT TDi PD 150, which is essentially the same car as the Cupra/FR TDi so I'm hoping someone can point me in the right direction.. :blink: The car is an 02 plate and...

Can someone positively confirm the pressure range of a couple of MAP sensors please?? 038 906 051 C (Bosch ref. 0281 002 401) 038 906 051 D (Bosch ref. 0261 230 073) My information says that the "C" suffix is 300KPa absolute, and "D" suffix is 400KPa absolute (ie up to 2-bar and 3-bar...

My Seat ibiza 1.6 sport year 2000 cut out tonight when the warning oil pressure light came on and will not start, checked the oil leval and all is good. Oh and when i say cut out i mean i was driving along and the engine just cut and will not start. any mechanics on here that might have...

I know my tyre pressure is inside my fuel cap. But I've gone from 195/60/15 to 225/40/18's. What tyre pressure should I be using?

I'm hoping to be running my LCR at 150 Kgs below the OEM weight soon at 1,200 Kgs Is there a caculation to allow me to work out what tyre pressures I should run now. For the track I've been running 2PSI (hot) higher than recommended 33 PSI on the front and 33 PSI (hot) on the rear. This...

hi i am new to all this and have just regerstered, iv spent a load of money on my LCR and the other day the red oil light started flashing first at 4,000 rpm then 10 mins later at 3,000rpm then another 10 mins 2,000rpm, then it just stays flashing even on tic-over then about 100 miles...

Hi all, Recently I have noticed my boost is only reaching 14 psi and then tailing off a couple of psi. Previously it would spike to around 21-22 and hold around 15psi. (boost guage) There is no obvious boost leaks or split vac lines, and i have recently serviced th DV. Also there is an...

Good evening! I have some questions, which is that the other day mount a pressure gauge to turbo my 1.8 20VT and gives me a pressure of 0.5 bar maintained. It also gives me a peak of 0.6 BAR and I wonder if these pressures are normal. When I start the engine vacuum to -0.6/-0.8 mark. Is...

Hi all iv got a problem my rear washer isn't spraying at full pressure it just trickles out, iv had my mate take a quick look he blew the jet out with air and checked for leaks and nothing. I'm thinking there must be a blockage somewhere. Do you think it's a trip to the stealers or can I sort...