position

Hello, I'm having back pain due to the seat not reclining. It was my mistake not to order the electric adjustment. Thus I seat "on the chair", instead of "in the chair" - meaning that all my weight is pressing on my lower back. I did have a test drive with an Ateca with electric adjustment - and...

My garage are quoting 7 hours of labour to replace a camshaft position actuator on my 04 Leon Cupra. Does this sound reasonable? Its annoying because they origionally quoted 1 hour of labour but now are saying it is much more difficult than they first thought. Argh! Cheers!

Hi all, does any one have a picture they can show me that shows the bottom of a Leon Cupra 2003 to where is the Best place to position Axle Stands? As im looking to do some work on my front disks this Friday and just wanted to check :happy: Is it OK on the wishbone? Cheers

Does the MAP sensor HAVE to be on the hot side of the intercooler? (or is it on the cold side.. i didn't really check) Having a bit of trouble with a FMIC so i was wondering can i place the MAP wherever i want? Thanks guys

I am having problems with my tailgate, its stuck in the unlock position. I've had the car about 5 years and the lock has been fine until Wednesday. I opened it but when I went to close it the lock stayed in the unlock position. I have took the trim off and and a sparky friend has checked all...

Coming back from a friend's house this evening I come to traffic lights, go to pull away and nothing, pressing the throttle and no response :help: So got it trailered home and got the code scanner out, 18039- Accelerator Position Sensor (G79): Signal too High P1631-35-00 18042-...

Does anyone have the part number? Either Main dealer number of GSF mart number? I've searched and all the results just show people asking for the number, and just getting replies basically saying the timing will be out and that the sensor never breaks....

HI, I have a '99 ibiza tdi 90 bhp, AGR engine code completely standard. Yesterday whilst driving to work at a stead 50 mph in fifth gear the glow plug light began flashing and the revs dropped and stayed at 1200 rpm which i understand to be limp mode, With The throttle pedal becoming...

I did know my armrest was not as good as new any more, but had no idea it would be stuck in the upright position. Any one know how to attack this problem? The usual way doesn't work, the "button" doesn't seem to get hold of what it should in there...

Got home today and noticed that some idiot had pranged into the driver side front bumper while the car was parked in the company car park. Apart from a few scratches, the headlight seems to have popped out of position, and i'm not sure how easy a fix it is? Is this something that I can do or...

goes into limp mode nw and again, reving on its own up to 3500 rpm when in neutral and clutch out, put clutch in and the revs drop but only to 1500 and when driving do lose power, any of this sound fimiliar? plugged it and came up throttle position sensor p1639???? would this cause a multiple...

Hi there, I hope somebody can help me - I'm new to the forum but have been trying to resolve a problem with my Altea and need to pick your brains! We recently took our car into the garage to replace the passenger front coil spring and while doing so, they damaged the wiper linkage(?) and had...

Hi there as per previous thread, I needed to replace the wiper linkage on one side...this went smoothly enough. Replaced wiper arm etc However, the wipers work fine but when then come to rest either driving or parked up they always return to the service position (at the bottom of the...

Camshaft Position Sensor (G40) / Engine Speed Sensor (G28): Incor. Correlation What the...?

I was looking at my car the other day, and couldn't help but think the exhausts look rubbish. They are a good distance under the cut outs, and are also a reasonable distance into the bumper. Is this normal? To me, it looks amateur. There is almost no need for the cut outs at all! I saw...

i've got a single wiper on mine.it was set back for the mot how do i set it so it sits in the middle??

Hi all, Virgin post!!! I have a 2000 Leon cupra and I seem to have got the rear back seats locked into the upright position. :cry: Had the back seats down for a week or so wile driving around and I think something has moved around because when I try and use the seat release they are louse...

Hi, first time here, so dont stare... Looking for a throttle positionl sensor on base cordy 2.0 sx 16v with 92k. Trouble is, i need it for sunday. Apart from breakers - anywhere I can get one in the Guildford area? Is it only VW family that use it, or can I look at at other manufacturers...

hi guys, anyone had these on there TDI's?? car is a 100pd sport rider. 18263 - powertrain data bus : software version monitoring p1855 - 35-10 - - intermittent 18047 - accelerator position sensor 1/2 (g79/g185) : implausible signal p1639 - 35-10 - - - intermittent cheers guys

been having problems starting my car so i got it checked out today by my local garage who said it was the crank sensor. can anyone tell me where the crank position sensor is and what it looks like.