point

I have noticed recently that the feel of my clutch has changed quite a lot (57 FR TDI), it used to bite much earlier (as I didn't have to release the clutch far for it to respond), it's not slipping or anything, I'd just like reassurance that this isn't the clutch going or something (at 10k...

Apart from the horrid pink peeling brembos, I've not really have any issue with my Cupra R since picking her up 3 years ago. However recently I started to have an issue with the Jack point covers on the side skirts falling off. Driving along and suddenly hearing a clattering noise is pretty...

Hi, I posted before about my clutch, but now it has got worse so I'm pretty sure it is not just my imagination now. Over the last week or so, the bite point for the clutch has moved closer to the floor, with the clutch no longer springing back up to the rest point. It will come up slowly...

having trouble getting this little baarstard to clip back into place , all the grovves and lugs line up but it just won't snap tight . Anybody got a DIY method for solving this without screwing the thing through the bottom ?

I have a new shape Sport and it's fine. This may be more a marketing question than one for a car forum but why (oh why oh why oh why!) launch a new model and then within not much more than a year discount it and replace it with one that's the same but not quite. I can't see the logic?

the covers that sit over the jack points on the side skirts. they should just clip on but how the f**k do they go tried putting the back clip first then the front tried the front then the side annoying me like hell, its clipped at the min but not sitting flush and it you move it or touch it will...

Folks, Im all wired up and ready to go with my ICE in the Ibiza. Although im not getting a power light on at my amp. Everything seems to be wired up correctly as ive checked it 3 times. I think it may be my ground that is messing me up. Ive searched for grounding points and people are saying...

on the de-cat pipes most of the seem to have a replica cat, whats the point of it, why isnt there just a straight pipe? and also if you got a 2.5" or 3" downpipe, how would you fit it to the rest of your system, would you need to get the rest of the exhaust (cat back) the same size as the...

Does anyone have part numbers for these?? need an off side rear cover as Ive broken the clips on it, but couldnt see the part number in the parts number thread.

Hi guys, Im currently preparing a rally 2.016v. I have a 6point sparco cage and was wondering if anyone else has the same cage or a 6 point cage generally and if they could post pics of the cage feet as me and a mate who is fixing it for me are struggling to work out exactly which plates go...

How do you fit the damm things on properly so that they sit flush on the skirt? Noticed that mines was a bit loose tonight and took it off to fit it back on but it doesn't sit quite right and I am worried that I am going to lose it. This is for the BTCC side skirts. Thanks and sorry for the...

Hi guys most ibiza i've seen have these missing or ill fitting due to broken clips, does anyone know the part number for new ones as i could do with 2 sets really for the ibiza and the cordoba?

The clip at the front of the side skirt that removes so you can jack the car up has been nicked so I went to SEAT and they told me they can get me one but I have to get it sprayed up myself! Is it me or does that sound ridiculous? Any one else had this happen?

Just picked up my 05 plate Leon FR - happy with it so far!!! However, on the way home, one of the jackign point covers "fell off", i heard it scraping on the road. So stopped and popped it back in, didn't feel very positive to go back in i must admit. Got about 10 miles further, and it fell...

Ok guys, my clutch pedal went yesterday and as I was only ½ mile from home I got my dad to tow me back to my house. Anyway I screwed my towing eye into the socket on the front of the car and tightened it, but as I was being towed along it gave way under the strain and I couldn’t fit it back...

Hi all, not really sure what this part is called, but im after the passenger side sill plate cover which fits/slots over the front jacking point on my Ibiza Cupra 2001. My car is onvi yellow, so im ideally after this colour. I think if i go to the dealers, they will supply me with a...

i'm having an absolute NIGHTMARE with my sub and amp at the mo, it keeps cutting off! been back to where it was fitted and had the amp tested, all fine, they 'checked' the wiring and told me that was fine too bu the bugger won't stay on, or come on at all! took it to Bass Junkies and they said...

hi bthere ive got a seat ibiza 2.0ltr 8v cupra sport.im after some info of prices on replacing the jacking point caps on the side skirts and the one on the back bumper fot the towing eye. if any one could help would be great thanks;)

Just fitted some bucket seats to the beezer via some custom made subframes i made myself, but cant find anywhere to fit a harness in. Any ideas? Is there any mounting points i could use? The thread i need is an M12 by 1.25. If not, can i just rebolt in the clippy bit of the belt and use...

Ok I know where to put the harness in the rear (c-pillar), I know where to point one of the lap belt mounting points down by the door. BUT Where should I best mount the mounting point at the side of the handbrake? Where would be best to drill? Or mount it?