plastic

This has to be the simplest part on the Ibiza, just a black ring on the centre of the dash but one of mine fell out today as it had cracked. Any ideas of price or a part number please? I also found a hole in the rear speaker grille (it's a 5 door and I only got the car yesterday). Annoyed...

i had the bonnet up today filling my washer bottle up i noticed that the plastic that covers the engine was sitting properly then tryed to move it into place when it completely came of in my hand. i can see locating pins on it but no clips so that it would stay in place is this the case or...

Just wonderd if anyone has changed any of the plastic surrounds around the radio etc ? the door handles in my cupra are silver - has anyone bought a radio surround / heater surround ? Find the interior quite plane and think this might change it a bit, like the golf anniversary interior.

I have a 2004 1.4 seat ibiza sport. When I brought my car used the big black plastic under body under the front of the car had snapped off. I need to know the name of this so I can contact my dealer and order a new one. It's almost like a large black plastic shelf that goes from both the left...

Hello, On my 2001 reg cupra on both seats at the side the plastic covers have snapped off and I wondered how much they are to order in and what exactly they are called? Hope you can help? thanks:)

Hi guys, I would really appreciate the help here. I'm in the middle of routing my amplifier wiring kit through my car (under the sill plastic trims and carpet) But i can't seem to get the plastic trims on the side of the car off (bottom of doors, kick plates, and rear quarter speaker...

Have just got my Leon 1.4 TSI, but the small black plastic cover that sits over the Aux input jack is gone. Does anybody know where I can buy one from?

Hey people, I was just wondering how do I take the front slat grilles out on my mk4 ibiza as I might change them for the FR Honeycomb ones :confused: Cheers, Steve

I have a seat ibiza 2004. The plastic that is under the steering wheel and goes to the foot pedals is really loose. I have just had some work done and i dont think they have put it back correctly. Its the plastic that has the white clip, it does seem like it has screw holes. It is slightly...

is there any bad points to removing the plastic engine cover and driving without it? Or is there any good points like letting the heat out and keepin engine cooler?

Wondered if any one has got the part number for the plastic surrounding the stereo and heat controls. As my car got broken into and they have snapped it cheers

The sump plug on my TDi Cupra is loose, it tightens to the top but wont go really tight resulting in slight oil leak and the suspicion it'll probably work itself loose. Took the car to Seat who recon its basically ****ed and will need a new sump! I dread to think how much this'll cost me, so...

Hi, just a quick one... what or how would you describe the plastic trim around the Ibiza gti / Cordy SX fog light lamp? I know I could search breakers yards and or ebay etc but knowing what to call it or search for would help etc! Or, if anyone has one lying around they no longer want!? Random I...

Iv been searching and cant find what im looking for? is there a guide on here on how to smooth the bumpers and plastic weld im thinking of gettin a second hand bumper and havin a go at this myself anyone done this themselves?

As the tittle says the plastic bit round my number plate on my leon doesnt look the best its all white marks round it. I would like to get it back to soild black i have tried bumper care but it doesnt seem to give it a lasting shine :cry:

.. to get to the back of the S boot handle? I can't see any screws so I assume it pops off, but I don't want to rip it off incase I damage ay clips.. (going to paint the rear S) I've tried a search but I can't find anything specific. Any help would be appreciated! thanks!

I have heard a few ppl mention about plastic welding the bumpstrips to smooth the bumpers but does anyone no how its done as i did a search but cant see anything. I have done the lines across the bottom of the bumpers already but wanna no how to do the rest

been reading a lot on this site and i was just thinking how can i tell if i have got a water pump with plastic or metal ? on looking at all the paperwork with the car (collect it on thursday) the cambelt was done just 3k ago but nothing on paperwork about waterpump.

Anyone know an easy way to plastic weld the hole left by the bumpstrips on the MK3 cupra?? ive seen a couple of arosas that have been done but not sure how to do it myself! ive got a old cupra bumper laying around so i will experiment! Any ideas??? Thanks!

Hey folks, I have noticed that on my passengers side door, the black plastic trim running between beside the window and the other half of black plastic trim of rear door, is scuffed and is scuffed so bad a hole has been developed. Just really wanting to know what products can be used to...