inlet

Has anyone done any logging of the inlet temp with Vag-Com? With &/Or without a FMIC fitted? What sort of temps you seeing Idle and on boost?

I have bought a can of 10k boost for my LC, and the only instructions on the side state: 'Apply 10k boost directly into the turbo charger inlet' Could someone please point out the exact location of this, as I dont want to buggar the car up - and I'll be damned if I can find a diagram of...

hi guys im going to attempt to remove these items and send them off to the polishers. just wanted some advice from anyone who's done this, is there anything in particular i need to do, look out for, replace etc. many thanks

any one know of any problems that may come from swapping the inlet manifold on my leon cupra (currently inlet pipe is on the left of the engine bay) to one from a cupra R, or ibiza cupra etc (still small port) so the inlet pipe comess from the right of the engine bay. the reason for this is...

Just got in from a 15 minute spirited drive of 60+ mph on the country lanes. It's about 20 degrees outside so not cool. However I ran out of screen wash during the drive (god damn bugs) and when i filled it back up i happened to rest my arm on the inlet manifold. My word was it hot! Surely...

OK moderator you may wish to move this as the car in question is a 99 tolly 110TDI. I have posted the first part of this saga in problems, issues. But to do the job I had to take off the inlet manifold and EGR and believe me, I was not prepared for what I found.!! This engine has done...

Need advice all you TDI Gurus, I have a drip from the inlet pipe, not serious but very messy, drips onto drive shaft, gets sprayed around, Do I have to take all of the inlet manifold off to get to it? I had to take off a lot of pipework, just to see it. Anybody repaired this, in car...

Is this normal? Also, what the hell is this, it was hanging loose by my horn - don't look like a connector on the end, but it does have a retaining clip up the side just like all other connectors do - me confused!

Well as per title really... After thinking about it for ages, and having some spare time on me hands as I couldnt do what i wanted to.... I decided to take some sandpaper and wet and dry to my inlet manifold.... Well, after 2hrs of manual hand sanding, I got it to a stage that looked...

Is the inlet manifold gasket single use or can it be used again?

Hiya all, Can anyone confirm if the inlet manifold is the same on all 20vt ibizas (including mk3 and 4) and leons as Im looking at buying a spare inlet but the seller cannot confirm which leon or ibiza it came from. Any differences in the inlets if the car had drive by wire? David

could anyone tell me where to find my inlet air temp senser?

Can anyone confirm if the inlet manifold from a audi tt, will fit my ibiza cupra? Mine is AYP engine code?

Hi peeps Will a golf mk4 inlet manifold from an AUM engine fit a Leon AUQ engine? Are they the same? And is an inlet manifold easy to remove and fit? Cheers guys

Can you have/get the inlet manifold ported, so you can get more air flowing into the engine, if so does anyone know any places that might do this? Neil