Hi people
Hope you can help
I drove my car (53 plate 1.8 20v leon with jabbasport ihi vf34 turbo upgrade) pretty hard and the turbo seemed to jam and the boost gauge would not go past 0. This was quite annoying because the last one only went 2 months ago when i started hearing a whistling...
ok I bought the cupra a month or two ago as a bit of a project, and luckily ive been looking at it that way as its costing a fortune at the mo!
Anyway it felt not a massive amount faster than my k03s & as some of you may know i made a thread a while ago about the lack of turbo noise...
Ok...
Just been kinda offered a 2nd hand IHI on another site, and I quote:
Not got the spec yet. What did put me off was the "external trust wastegate". Don't have a clue what this mean, other than guessin it would dump the air to atmosphere. I understand that our cars ar recirc/internal. Would...
My boost seems to be all over at the moment , it should hold 1.4 bar but seems to spike to 1.6 and drop back to 1.1 - 1.2 ish i did a maf reading and the most i got was 227 g/s at around 6000rpm.
I need to check actual vs requested boost but the car is at JBS tomorrow for a service so iv...
Its about time i did another readers ride thread as my car is far from standard now so the 1st page will be the spec and the 2nd will be pics ( unless someone comments while im uploading pics ) . So here goes.......
2001 Seat Leon Cupra ( AUQ ) now 308 bhp / 368 ft/lbs @ 1.5 bar
ENGINE
1.8L...
anybody had trouble with the exhaust housing warping etc? as the exhaust is blowing quite badly on the ibiza and cant seem to find where its blowing from.
But heard the vf34 is prone for this or housing cracking?
if so whats the more likely cause and how hard to remove exhaust and...
Some people may have seen it before as it is carisle petes old car....but here are some pics anyways for the benefit of those who havn't :D
IHI'd with 342bhp and i bloody can't get enough of it :p
Just a quick update on living with the big turbo.
Well its been 1 week now and iv gone through alot off tescos rocket fuel and iv got to say im well pleased . Not just with the power ( 318 bhp / 348 lbs/ft ) but the sound is awsome through the 3" decatted zorst. Been up n down the local...
Hi all, right i've finaly started the ball rolling with my BT conversion it's going to be a top mounted twin scroll turbo and i'm now in the process of getting all the bit's together to fabricate my equal lenght manifold, but before i start i thought i would ask you lot your opinion on a couple...
Okay, thought I'd post a few pics of day one of my turbo conversion. For the record my hands are killing me. Damn these cars with their fiddly turbos fitted in silly tight spaces.
Any ways, thought you might like to see proof of my spanner time.
The kit:
The working environment (looks...
If I was to buy this...
http://www.seatcupra.net/forums/showthread.php?t=148676
What kind of power will I be looking at? And also what else would I need bar a remap?
Has any got a picture of the TIP used on a IHI set-up on a LCR .?
Pics with the engine out with the turbo and TIP connected would be nice :)
I just need to know where its extended.
Well me an a good friend have been turning my ibiza cupra R into an IHI beast!!
We have done all the work ourself to a very high standard apart from the mapping
Here she is
Will get a full spec up in a min for ya all:funk:
Im looking into a IHI turbo convertion from jbs on my lc has any one done this and whats the power / drivability like , im told ill be lookin at 300 BHPish with fuelin n coolin upgrades plus what iv already got???? little help???:confused:
had my cupra rooling roaded yesterday morning so here a video of it on there
it made 342.3bhp and 363.7 lb/ft fairly happy with the results
on that run it made 331 and some torques!!
as a few of ya know its had few running problems!
just got off the phone to jabba AGAIN!!
finally found out what was wrong with the old bus!
the exhaust housing was warped and slightly cracked causing problems with th wastegate etc aswell!
so New turbo etc is on mapping is getting...
Sad day today, after 6 months of pleasure trouble free, fuel guzzling driving, it could be time to say Bye to the Ibiza IHI.
Got a guy coming down from Leeds with the money to take her away today....IF he likes her....
Which, while is in itself, good and bad news, our other car (Fiesta)...
What would you say was a fair price for the intall only no mapping just fitting..?
This will include the install of the manifold, Dp, turbo, injectors, fuel pump nothing more nothing less.
I have been quoted but i'm not very pleased with the quote..
:)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.