hids

tonight asked about condensation in headlights, only to find out that its the hid kits grommet thats loose on the headlight backing plate thats causing condensation , will need to silicon the 2 together to seal it, has anyone else had this problem

right i have recently fitted these to my LCR but since i have i noticed that when i hit bumps the lights shake, i have checked that the bulbs are in properly and they are fine its the unit inside i think has anyone got any ideas?

Has anyone bought this, im a bit wary of buying chinese things on ebay. Basically it should plug into the HIDs and extract enough power directly from the battery to the lights and not take it from the same loom as the dials (hence, the resetting)...

probably on here somewhere is photos or instruction setup for wiring up the hids, looked in box today first time no install manual, need guidance asap prefer fotos if can thanks a lot .

Hi people Dont know if anyone will now the answer to this but here we go. Well i fitted some 8000k HIDs i brought from america a few months ago. They are fine and would recommend them to anyone but i have noticed when sitting in traffic they flicker. It seems to be only once and doesnt...

ok lets see who has had the best deals from fleabay on hids i want to acquire them but want the best deal for the best lights i know some have purchased from ebay and elsewhere but dosh is not aplenty

Right am finally doing this now only problem seems to be when I put the bulbs themselves in they don't sit in place properly. The original bulbs were held in place with the wire surround things that clamp around the black plastic the bulbs are plugged into. Then you obviously unplug the original...

Just a little update, I fitted a forge split-r valve during the week and fitted my hid's yesterday and I must say it's £47 well spent. Had the plates on there a couple of weeks. Had some already without the euro logo on them until one decided to fall off so spent the extra pennies to get the...

I must be the king of asking stupid questions. But i like to know stuff, and be 100% before following through with anything HID kits, do they only replace the main beam? I'm guessing the answer is yes, but it's always best to ask :D

ive just fitted my hids and the passenger side one is pointing right up... But my old bulbs used to do this...how can i solve this.. Do you reckon ive put the bulb in wrong?

Fitted the 6000K H7 HID kit from diane-shop on ebay last weekend (£39.12 incl P&P!) Light output is great, but the beam pattern doesn't look right at all, when I park the car in front of my garage doors & look at the pattern. The original H7 bulbs produced a clear kink up on the passenger...

Well after searching the forum this might be a new one for some of the top dogs who know these cars inside out. I installed the HIDs etc, usual problem of dash going ballistic but, after telling the wife not use side lights and just go straight to main beam problems kicked in after a couple...

Right i fitted my relay this morning so i could get my hids running directly of the battery and hay ho its now working, there is no dial issues etc the computer does not reset itself. However........ I am still getting a prob with my lights, when i switch to sidelights my hids stay on...

Right fitted my hids and ive got two problems....... 1) The clocks go crazy on startup (the usual) 2) when i just have my sidelights on the HIDs flicker on and off For some strange reason im getting some voltage down the dipped headlight wire when just the sidelights are on. How do i...

Hi folks have had a trawl through the plethera (like that word) of posts regarding HIDS kits conversions etc etc. What I'm trying to find out is exactly what this is gonna entail if i want them The kit i need for mains full and sides - do i need to get washers installed - are the an MOT...

Hi guys, fitted the 6000k kit from mydepots at the w/end, it went hitch free and the kit works great. The RH side was fuss free and worked great, however now i have both the LH and RH hooked up when i turn the lights on for the first time my REV and MPH dials drop to zero then return to...

Sorry to bother you boys but im abit stuck on this one, Dont really know what to do for the best. I had a set of HIDs delivered today and when to fit them. I have got to options according to the instructions. Just switch th bulbs over, install the ballests and plug together. Plugging the two...

for a mk2 beeza, where can u get the projector headlights? otherwise the beam pattern is all messed up, also, whats the best kit to go for? Cheers Chris

Hiya fitted my HIDs at the weekend and was wondering what setting is best to ensure oncoming traffic isn't dazzled. I understand that as you move up from 0 to setting 2 you lose coverage/beam length. This is obviously for when your car has more passengers and load etc. But we are obviously doing...

got my hids fitted few weeks ago, heres a pic or 2, aint great but hard 2 get a gooden. well worth every penny n would so do it again