flywheel

Hi guys, hope all is well! I have a 2014 FR, 1.4 TSI, 150hp, CZEA engine. Just had the gearbox reconditioned due to the rivets breaking off the diff and the crown gear being cracked. Will be changing the clutch and flywheel while I have the box off. Should I stick with dual mass or swap over to...

Hi, I have a 2015 Seat Leon FR 2.0 TDI 150hp from the factory. I've had the car remapped to 184hp. I'm pretty sure that my flywheel is giving out because the car vibrates in 5th gear under acceleration so I started thinking about replacing it. I was wondering if anyone knows if the clutch kit...

Hey everyone so after many many hours and long long nights of researching all over the place I was able to put together a few resources for everyone looking at doing an SMF (single mass flywheel) conversion to get away from the dreaded stock DMF (dual mass flywheel). Here are some options...

Hi All, My first major post, I know this sort of thing has been discussed before and I've done quite a bit of reading. I'm really looking for someone with first hand experience to give some advice, thanks in advance! So I got my Cupra for what I think was a decent price in the knowledge that...

hi Im after a lightened and balance flywheel for my seat ibiza 2.0 16v abf. i cant find one anywhere, anyone got any idea's or know of anywhere that do them?

I know everyone gets he g60 flywheel for the Cupra but i have been offered a VR6 clutch and flywheel for nothing and was wandering how much i can get it lightened by as it weighs quite alot.

Hi all, After just purchasing my LCR and taking it a decent drive to see what it can do, I have discovered that the clutch is slipping in 5th and 6th if you plant your foot. So what I would like to know is which clutch is recommended and whether or not to change from dual mass to single...

As the title says, dual mass or a single mass flywheel? just your opinions on the matter? which would you guy and girls go for? Cupra Tdi 54reg and upgrading with a sachs performance clutch.

Sorry. Posted it long time ago, cannot find it tho. So there is a question. Flywheel on ibiza 1.9 tdi Single or dual??? IS single very bad??? Thanks

is £250 delivered a decent price for a sachs dual mass flywheel? going to get an up rated clutch on and from what i can see ill need a new flywheel due to it being bedded in with the old clutch disk , not going for a solid one as the cars a daily and dont want it vibrating like mad. is...

I was just wondering why people do this conversion, also do the go straight on or is there other work involved cheers

Thats what Ive found on ebay : ''Audi A3 TT Seat Cardoba Ibiza Leon Toledo Octavia VW Bora Golf Beetle Passat Polo Vento 1.4 TDi, 1.8 T, 1.8 GTi, 1.9 TDi, 96- Flywheel, Clutch, Bearing # New OE Solid Flywheel, Clutch Kit (plate & cover), Bearing # This is a SOLID flywheel conversion for a Dual...

Just taken the box out of my Altea 2.0 TDI & I'm pretty sure the DMF is phucked! It seems to have end float, ie, you can seperate the two parts slightly - I don't think this should be happening!! So, suggestions for the best place (price) to get a replacement. Cheers.

I am planning on replcaing my clutch at the weekend with a G60/VR6 Setup. I have bought a LUK Clutch and am awaiting a G60 Corrado clutch which is being sent to me by a guy breaking his engine. I have just rang a local engineering place and enquired about getting the Flywheel lightened and...

hi, i saw that some people put on mk3 1.8t vr6 clutch and G60 flywheel, WHY??? are they any better than standard ones???:help: which one do you suggest for my 1.8t 300hp, i have standard flywheel and carbon coated clutch??? thanks sorry for my english ;)

Im running 272bhp and 284ftlb now, clutch tends to slip when driving hard, What clutch have people with similair power gone for? Being skint all the time i dont want to spend over the odds, but need something to handle the power and more if possible.

For anyone with a Mk2 Leon, Mk3 Toledo or Altea TDI - If you ever need a flywheel, you need to know which make is fitted to your car. There is an inspection aperture in the bellhousing and if you rotate the crank you will see one of the setups below. The top one is LUK with parallel grooves The...

i got my car back from garage today as my dmf broke, i still have a tappit noise which increases with engine speed, doesnt get louder just speeds up, went a few garages an got told all sorts of answers from bottom end bearings to tappits. problem is cars running ok its just an horrible noise...

ABF stock flaywheel is very heavy ... (approximately 9 kg) What is the disadvantage of this? What would you recommend to alleviate? Which brand products are better? How many kg is appropriate? What will be benefits and disadvantages of lightweight flywheel? Thanks :)

I recently got a remap done on my 1.9tdi toledo to 145 bhp & 280 torque. Its an 02 model with 98000 miles. After geting the remap done there is a judder at accelerating up through 3 -5 gears. i have a notion its a flywheel judder caused by the remap but woul like to see if any1 else ever had...