fitting

From what i understand i need to modify the pump to get it to fit, is this a case of just blocking off the second pickup or is there more? Also, will i need to swap the floats? Thanks.

I have had a look at one of the guides posted about the front grill and need to take it off to put a radar unit behind. I then need to thread the cable from the unit into the car some how any ideas where would be the best place to thread it? Any pictures that could help would be brilliant...

Afternoon all, if im being a retard about this then please tell me and i'll apologise according but; I have the carbon fibe engine cover bit that fits around the oil filler cap and cant see for the life of me how it fits on the cupra engine cover. the carbon bit has 6 or so lugs on teh bottom...

Hey guys, Could not find so fast something about this, maybe someone has experienced something like this... I had my TIP , 007 DV and the jabba induction kit fitted the other day. Sound very nice. i can hear the turbo spooling up very loud.. But when the turbo reaches the full...

does the standard pillar just pull off or is there a technique 2 doin it?

Im fitting my AP coilovers this week and appart from top mounts and bearings if needed is there anything else i need part wise that isnt included as i dont want to be half way through the job and find i cant go on due to something overlooked. cheers ja

Uni intercooler, help! Im really struggling to get all the pipes to stay in place. The sharp angled bit of silicone hose that comes from the long tubing attaches to the original plastic mould going upwards. But theres the round metal plate on the frame in the centre. Mines sticking out a bit...

I have just been down to B&Q to see if they have any M8x35mm hex head bolts, they only do 25mm or 50mm+ Would it cause a problem using bolts just over 20mm longer than standard? Thanks!

guys help needed asap on this one i have a quaife for 02m box, need fitting kit and other components... whats needed and where can i get them at what cost please help appreciated

I have recently bought a forge tip for my lcr, Just wondered if you could give me a few pointers on how to fit it, how did u get to the turbo etc? If you could I would be very grateful, Many thanks Craig

Hey all, I did the n249 bypass and didnt really notice much difference. i av a revo remap and forge recirc valve and did the bypass but then thought i'd do a temp boost gauge fitting, when gauge fitted the car ran amazin with amazin power and then when gauge not on its back down 2 normal and...

Im fitting ap coilovers next week and have a ibiza fr tdi with 20k on the clock .It doesnt appear to have any knocks on the top mounts so i wounderd with this milage would i need to change them .Do you just need to fit the coilovers and thats it? Also im wanting the rear end to have about 1/2...

Does anyone know if I would need to make any extra modifications to fit one of these? Any recommendations for a decent back box for my mk1 leon 1.6 that won't cost much more than £100? Cheers in advance! :D

hey guys just looking to know what sort off a gain i would get off fitting a turbo off an audi tt 225 onto my 04 ibiza cupra 180bhp and would it bolt straight on. my mods allready are induction kit , forge dumpvalve remap was thinking about a forge tip an upgrading intercooler just wanted your...

Hey all. First of all, I'm new so hello to you all. Just got an 02 Toledo SE TDI 110 and its smoooooth, well compared to my Mazda 323 before anyway! Looking to get a REVO map at some point as there is a dealer near me. Hope the clutch will be ok, i've heard the turbo will take it fine though...

Hi guys, quick question: What tips have you got for securing the cage for a new headunit after removing the aura? I have fitted 2 stereos now (didn't like the look of the 1st one) and neither of the cages seem to hold in very well. The only tabs that seem to have anything to hold onto are...

Hi, Done a search but can't find a guide on how to fit this, anyone got any pics of one fitted? Is it easy to do? Cheers Neil

ive just got an temp gauge that i am trying to fit but im a bit confused with the wiring.:wtf: ive searched but carnt find the answer. the gauge has a yellow,purple,orange and black wires coming from it but which one do i connect to the sender that goes into the block?

Im fitting my LCR splitter and wounderd if i put screws in where the two centre V's were.Also do most cut the V'S off so the edge that buts to the bumper is level.? Tried to look this up heaps but nothing concrete hence asking.

hi guys i am new to the toledo scene and just wondered if the front bumper from a lean cupra and the skirts from one will just bolt straight on to my toledo?? cheers:D