fitted

Moved the above from original thread as topic changed Anyone Help?

anyone think the astra vxr design would look good on the beeza, i fancy some kind of decal to make it that bit different, and i like the look of this just dno how it would look on the car.

Anyone fitted a Clarion FB289RBT in a Leon MK 1 ? I'm looking to fit a new unit I was looking at the Becker 7992 as I like keeping the original look but its out of my price range. I'm thinking of going for the Clarion as the bluetooth clarity on calls is meant to be excellent, it has SD and...

Over the last week or so, I've noticed that I've been getting a slight grinding come from the rear brakes under light braking. Had a look at the outer pads/disc, and thought they looed 'ok', but to be on the safe side, I ordered up some new EBC discs and Ultimax pads from Bill @ Badger5 (£60...

hi people maybe a stupid question but did the leon cupra 2003 have the k03s fitted standard? only asking as i maybe able to get a turbo from one thanks coxyboy

Hi guys and girls, im thinking of getting this for the Cupra, http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=310068200865&ssPageName=ADME:X:RTQ:GB:1123 Anybody got one? Or what you reckon vs a Milltek? Theres some videos on the Tube but nothing on an Ibiza, just LCR's. And is it...

Fitted this yesterday, went for the cheapo option, a TIM white face, got it off Demon Twerps 25 notes for the gauge and 7 for the mounting bracket. My frugalness backfired however, when it arrived there were zero instructions and only about 4 inches of wire!, however it did come with the option...

Finally got around to having the Eibach shocks fitted today to add the to springs I had done last year. I am now fully Eibach Prolined up!! The rear tyres were also shot so I replaced them too. Now have a wallet lighter to the tune of £722!:cry: I didn't realise how much the new shocks would...

Whats the biggest size brake discs i could fit on my lcr with the standard brembo calipers? I can get these ate power discs from work for stupidly cheap :D

"][/URL] this is whats happening to my top mount with my coilovers fitted!!! its driving my crazy now cos cant work it out why its doing it and its obviously going to be effecting my camber! HELP!!!

had 007 dv and k+n fitted yesterday and maybe its me but i feel the car doesnt pull as well as it did...more at high revs between 5k-6k revs. comes on boost fine and pulls hard until about 5k revs then jus seems to rev without any real power behind it. ive heard that dv with weaker springs...

although i didn't buy a 2.0 16v ibiza in the end i did jump the gun and get a chip for it........As some of you may remember, i did swap my c reg golf gti for an m reg golf gti 16v on the way to see the ibiza which has the abf in it as well, anyhow..... I fitted the chip last night and i can...

Current SPEC: 2001 mk3 Ibiza Curpa Black Engine: REVO stage 2 software SPS3 Controller Universal FMIC 3" Blueflame Downpipe with race cat Milltek 2.5" Cat-back with twin pipe backbox Forge 007p N249 bypass (I'm convinced it's wrong) Forge black Turbo intake pipe Custom induction mods...

Hi SCN this is my old leon, standard look on the outside at the moment planning on some 18's and suspension eventually Engine has had ptorque map, pipercross panel filter and forge 007p managed 210bhp 230lb torque on the rr. Inside I have a pioneer bluetooth stereo with pioneer ipod adaptor so...

hi fitted intercooler today its a universal one . and when i started it up i got an engine management light on anyone no what could off caused this many thanks

Had a bit of play in my old strut so spoke to venom and they sent me a new one so took the coilover off stripped it down put it all together but now if i turn left the wheels pulls it to hard lock and it looks like its sat at a funny angle just. Any one know what this could be? or is it just...

At last its finished what a job that was it only took about um 2 1/2 hours and a but of swarein some blood and some fookin about under the car. :blink: Ive done a suspention change on a 03 ibiza before and id take that anyday over the tip. problems i had. 1.getting the original tip off the...

Evening people, i want to fit an open cone filter to my 20vt FR. i had a look on saturday brieftly but didnt want to make a mess of things! Basicaly, do i remove the airbox, filter and breather pipe? I can see a screw from the airbox to the MAF, do i unscrew this and the airbox pulls free of...

just painted my inlet manifold,rocker cover and charge pipe in crackle effect black :D just need to finish fitting tomorrow then ill get an engine bay pic up. But here are the pics of said parts,and if i do say so my self i think they look [B)]

few pics after dodging the showers to get it fitted.... :D