egr

Read some threads on here about the EGR valve and disconnecting it will stop crud building up in inlet manifold. I got a 2001 leon 110tdi found the N18 connector from EGR valve so disconnected it went out for a spin felt abit more responsive but after about 10min of engine running my oil light...

Hi,i was wondering if you guys could give me some much need info. The story starts like this:- *On putting a new cambelt on the car around a month ago i noticed a serious amount of built up deposit and sludge in and around the throttle butterfly and egr. *So last weekend i took off the...

Ok, cupra PD160. 55k on the clock. I am finding i have a lot of smoke on full accleration. I have had a tweeked 130 in the past and know whats normal and i don;t think what i have is normal at all. Also it can be very very laggy in 2nd gear say when you come on to a roundabout. And i...

Was browsing the forum last night and spotted somebody who has disabled the EGR via VAG-COM. Now i have disconnected and plug the tube on the EGR, But does disabling it make any diffrents with VAG-COM. Thanks. Luke

Hi, having had my ibiza cupra tdi in the garage, i've found out my egr valve's sticking, causing the performance to be a bit lumpy.. can this be easily cleaned out, or would i be best to either replace it.. or use one of these by-pass system's i've seen.. cheers

I'm sure I've come accross a nice picture of template in a thread some where many moons ago. The aim is to get a proper one made up ready to go. Any help would be appreciated.

Hello, Since i removed and cleaned the EGR as was clogged to death, (another thread), I keep getting the below appearing when eml comes on: 19586 - EGR System Regulation Range Exceeded P3130 - 35-10 - - - Intermittent now a quick look on google (other search engines do exist...

so, I've just bought myself a black '05 FR TDi150 & very much looking forward to picking it up! Its in excellent condition (apart from a few stone chips but i think these looked worse as the guy had just waxed it so they were white!) I do however have a couple of questions... Its got...

Hello All, Today I removed my egr to see how clogged up it was to discover clogged full with no light through it. anyways, whilst cleaning the worst out i discovered the shutter plate to be loose from the horizontal arm. So I know it needs replacing, which got me a thinking: What are the...

hi guys can some one tell me exactly the best way to blank your egr like does the 4mm hole trick work and is there any way to keep the light off?? thanks simon

have anyone tried in the past on a 1.2 or any other ibiza applicable,on the throttle body there's a EGR input with causes hot and contaminated air into the intake system. What id like to do is take the pipe off the throttle body and let it vent external and make a blanking plug so the throttle...

Hi My EGR power pipe has just arrived and I'm reading the instructions as we speak. In the fitting kit there are 2 nuts, 2 washers and 2 locking washers. They are meant to be for the blanking plate and gasket for the turbo end. Where am I meant to use them on my PD150? I'm confused as...

Hi i hope you all don't mind me finding out a bit of info:redface:I have a vw passat 03 reg with a 130 pd tdi engine and i am looking for a EGR Power Pipe Kit does any one know where i can get one?:confused::cry: Thanks for any help Chris

Yo Chaps.... Been mooching around the net on things to buy for the motor, came across the Allards site, and the EGR Pipes. Anybody had any experiance of them? Did a search and it didn't come up with much in the Mk4 section. Anywho...heres a link...

hi guys used the search bar but couldn find definitive answers!! anyway my question is why would you want to remove or blank the egr valve? what improvements would it make? also i seen that you can just turn i dwn on vag-com so what thathabout?? and las but not least i seen a pos that said...

Hi guys, Found this on Forge's site today; http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190204&product=FMEGRRPS Will this give me anything besides being able to fit a boost guage? Easy to fit? Cheers in advance, Ben

Our 2.0 FSi petrol Altea is showing its engine management light, I attached a code reader and it reports three faults: 17887 Brake Boost Vacuum System: Mechanical Failure 17811 EGR System: Regulation Deviation 17808 EGR Valve Circuit - Electrical Malfunction A After resetting the faults...

i have done a search on the above but i cant find anything about why its on the cars? i mean why would ford/seat and who ever else put something on thier cars that make them perform worse? it would cost more and be a waste of thier time? i am a little confused by what its supposed to do and what...

Same question as topic :o)

Hi Everyone, I've just bought a 1.9TDI Toledo 2004 105bhp (BKC engine / new shape), the car seems to misfire at about 1700rpm. Most of the time it's a very slight vibration/shudder when running up the gears through 1700rpm to 2000rpm after which it clears itself and runs smoothly. Although...