cupra

First time I've jumped off the PCP/Leasing wagon in a long time, but as the MK4 CUPRA Leon petrol hatch has been pushed back, likely to March and I've been carless since handing my CUPRA 300 back in March this year, the wife was going to kill me if I didn't get a car and kept needing to borrow...

Looking at buying a spoiler lip for my 300 hatch but the one I’d like says it’ll only fit the estate, is there actually a size difference in the two spoilers or would an estate spoiler lip fot a hatch? Thanks in advance!

£1,600 (ONO) This kit is for a Seat Leon Cupra MK2 with a 02Q gearbox. This was purchased, but never fitted (or even taken out the box) due to personal circumstances. Its never going to be fitted so its here for sale. There is everything needed to upgrade the diff, flywheel and clutch...

Display Pic

Hello there, I am in love with the 2017 Cupra model. The only thing i really don't like is the DSG farts it has, as they are way too loud and i don't like that sound in general. (Do like the bangs when going off throttle though) Did anyone feel the same and had a way of only removing that DSG...

Syphon submitted a new resource: CUPRA Formentor guide - Model specifications, performance, colours and other options for the CUPRA Formentor. Read more about this resource...

This guide will be kept up-to-date as information about the model changes over time. Introduction The CUPRA Formentor was the first "Pure CUPRA" model introduced by SEAT's spin off CUPRA brand in 2020. It is an SUV, but is also known as a CUV or Crossover Utility Vehicle, a model that sits...

A guide to replacing the rear pads and discs (272 mm) on a Mk. 3 Leon with independent rear suspension: The only difficult bit about this job is removing the caliper carrier bolts. The factory tightening spec is 66 ft/lbs plus 90 degrees which is very tight indeed. If the fasteners are rusty...

Hi all, First proper post, so hopefully this is the right place for this. It was a beautiful Tuesday evening. The sun was shining and I had just beaten a GTI who was battling for first place when merging into a single carriageway. The car was making some beautiful noises as I manoeuvred around...

Just wondering if anyone knows whether the version 1 of the VAGsport res delete will fit to a cupra 290, as i’ve bought that version however i’ve seen on other forums that version 1 only fits to 280’s? Bare in mind I only found out that info after i’d bought the part.

I realise this isn't the most difficult thing in the world to do. But with fitting charges from £30-£120 I decided to save some cash and give this a go myself. I chose the Nextbase 512GW for several reasons: I wanted the option to record speed It had to be removable so it didn't get stolen on...

After doing this to mine i have decided to write a simple guide for it, Please note I am not to be help responsible if you break your RNS310. This guide updates the firmware on the device it will not update the maps! This guide is only for the RNS310, Not the RNS315,RNS510,RNS810 or any of the...

Just thought I would post up the VCDS mods that I know work on the Facelift Leon with Virtual Cockpit. For reference - These were all proven on a Leon Cupra 300 sc - MY18 - Virtual Cockpit For reference - I use a genuine Rosstech Hex-CAN cable with the latest VCDS software. Display Drive...

Links to helpful bits of info on this and other sites Battery Types and what they mean https://forums.seatcupra.net/index.php?threads/battery-completely-dead.439948/#post-4737776 and how to code a new one http://forum.obdeleven.com/thread/2041/battery-replacement How to upgrade you boot struts...

The purpose of this manual is to show you how you can remove the central console and then remove the switches out of the unit to enable work to be carried out. I will update over time to show how i fitted a stop start memory module (I need to run a 12v power feed to the back so on hold for a...