conversion

Hey guys, currently looking at replacing the engine in the Arosa, and wondering what's out there? i.e. what the best conversion ? Easiest conversion? Recommended? thanks

Hey, done a lot of searching of the forums for answers i'm after but can't find what i'm after. I have a Leon Cupra TDi 150, i want to fit LCR brembo calipers. I have LCR 18" alloys already fitted. Will the LCR brembos fit my leon tdi 150 with the 18" LCR alloys and if so is there anything else...

Okay, I asked a few questions about the VR6 conversion a while ago. I have since had a re-think. I now want to do a 1.8T conversion. This means I have to ask all you lovely people about parts etc. Basically, I know the engine will bolt straight in but I don't really know much about much when...

i have 94' Ibiza mk2 1.3L Carb and i want to swap the 1.8L 16v engine (engine code ADL )so i need to know which parts i'm gonna need to change it ? :think: and please don't tell me to buy Cupra or GTI cuz its impossible to find one in Egypt... :cry: so my only option to swap an engine ( and...

Hi guys I have managed to get my hands on the following edition 30 ko4, manifold, injectors and hoses & pipes IMG_0523.JPG IMG_0525.JPG IMG_0519.JPG my question is there any thing else I would need to complete install ? P.s I also have an s3 intercooler and hoses on route aswell...

sorta feel like doing somthing a big crazy, since its mainly polos people do, and thats really all a fabia or ibiza is, couldnt be hard could it?

now then i have searched everywhere for a seat with a honda vtec engine. so far i cant find one. i need to glean as much info as i can so any that may be relervant is welcome. my first move is gona be to take her back to shell only. if i can get their four wheel steering as well, anyone that...

im ready to upgrade my clutch and flywheel for a single mass, been pricing them up and found one at unipart which is a valeo one and is 228mm clutch plate, is this correct and has anyone used the ready to go conversion kits from GT, unipart etc. and if so are these good kits or would it be...

Looking for some info.... Would it be possible to get a Corrado G60 engine in a MKII Ibiza? How much work would be involved and would it be worth it in the long run?

i've managed to get hold of an 02A gearbox, but i need the clutch conversion from hydraulic to cable. usually on the ABF engine'd cars Theres a part you can get from Seat Dealers any help would be awesome

Hi all. Ive done a search, looking for information regarding the above, but cant seem to find anything... Basically, has anyone had it done, and if so, how much/who by? Im considering doing a home rebuild, so if anyone has any experience of this (what its like once completed, as opposed...

I'm no longer a mk3 owner, but just done the fabia wiper conversion on my mk1 leon, and noticed that fitment looks exactly the same as the mk3 ibiza that my brother has! I know a lot of you just de-wiper the rear, but my brother wants to keep his wiper, but doesn't want the construction site...

this kit any good http://www.eurocarparts.com/ecp/c/Seat_Ibiza_1.8_2000/p/Car-Parts/Transmission/Clutch-and-Associated-Parts/Solid-Flywheel-Conversions/?641780170&1&2b8e7429aee33e6b1042019afa4fa76eebafe3f7

right chaps, i was on scn a while back with my old ibiza cupra and you chaps seem to know whats what! i sold it to get a sensible bora 2.0 8v 115bhp - after a short time i got bored of the lack of power and dropped a golf gti AUM 1.8t lump in with s3 everything - inlet, injectors, tb, 4 bar...

Guys, I've just been reading up on this old thread to get some answers to some questions about the 4WD Leons, and it's not 100% answered everything for me. There is talk in there of various mods that can/could be done to a FWD Leon to make it 4WD, as well as making a LHD Cupra 4 in to RHD, but...

Heres mine and my mates little project we decided 2 do over the weekend....we took a perfectly workin Audi A3 and decided 2 put the 20vt lump in my mk2 Ibiza....still have alot of work 2 do on the car Would like 2 thank Roly 4 pointing me in the direction of Ibiza_95....thanks 2 these they...

Greetings from the mk4 section! My mate has a mk3 1.4 ibiza, and would like to convert it to the cupra mechanicals. As I see it it would require engine, gearbox, ancilleries (turbo a/c intercooler ect), wiring loom, dash instruments, brakes, suspension. The plan would be to get all the...

I'm thinking of having an lpg conversion done to my lcr. I do quite a few miles so it'd be to save money. The lpg kit should pay for itself in 18 months. I've asked for hidden filler cap behind the number plate and waiting for them to get back with a price. Has anyone had any experience or done...

Whats the biggest engine i can fit into my arosa with minimal mods?

hey, this may seem odd, but i was thinking of turbocharging or even supercharging my 1.4 sport, just because it would be different, has anybody done it? prices? and finally any big problems that would need to be addressed, i would only be running a very low boost, just want a bit of extra power...