camber

So i finally had the tracking and camber done front and back. The thing is the car wasnt as low as i wanted it before i had it done. I was just wondering if it would be ok to lower it some more, or would i have to get the tracking and camber done again to stop the inside of the tyres scrubbing...

Basically i've recently dropped my cupra all the way down on the front.. Sadly i've ended up with a lot of positive camber and just for a bonus only the left front wheel has this camber.. Has any one else experienced this? Any help appreciate! :) A photo you show what I'm talking about.

hey guys some of you might know i have been having problems with my R pulling to the left so today i went on the hunt to try and find out what ws wrong. Ended up taking it to get the four wheel alignment done and it seems the the left front is at 1 degree 28' and the front right is...

Hi, I have fitted bilstien pss9 coilovers on my car and i am going to get the tracking and cambers set up. I was just wondering if anyone could tell me what sort of camber would be best. I am hoping to do a couple of track days but mostly road driving. Also what are people running and does...

I see that posted on e38 about rear camber on a mk3 golf, would this work on the back of a ibitza?

:D hi all, i know my car is not really here for me to do anything to but i noticed that the inner of my tyres are wearing.. i know its not the tracking so belive its the camber.. how is the camber adjusted on these? do they use the camber bolts like early vw's do. ?? i was thinking about getting...

okey, i've searched but got no smarter. someone says -0.30degrees is original. and should be -0.5 lowered. but someone else says -0.5 degrees is original. what should i set camber for with 35mm lowering springs?

pick this bad boy up on monday! woop traded my 01 audi a3 in for it gotta say the FR is miles better on the acutal feeling of the drive! prior to the a3 i had a lupo gti and id say the FR is on par with that!:funk:

afternoon all, fitted my new h&r cup kit yesterday put car back on its wheels and the tracking and camber is a mile out (as expected) how do you adjust the camber? is it done on the shock/hub bolts? and most importantly will the garage now how to adjust it if it can be? going to take it to demon...

Hey guys, done a search but didnt really bring up an exact answer... Ive fitted 17s and the front the wheels sit up like this | --- | or ever so slightly out furthur at the top like \ ---- / but not quite as extreme as that looks, anyway, i need to bring the tops in, not worried about tyre...

As above .. would just want info on camber bolts ive been looking into getting some but cant find any info .. anyone using any ? THANKS :p

Helloo for those of you who dont know my cars pretty low and l8ly ive noticed my camber gettin worse and worse meaing the tyres are going on an angle. Had my service today and they rang me up and said you need to front new tyres i said they must be calling the rong person but they wernt. When i...

Hello! Ive just had 4 wheel alignment (not going to name the company :) ) in Milton Keynes, and theyve told me there is negative camber on the rear wheels after lowering the car on coilovers and there is no adjustment. I dont think thats much of a problem really is it? was just leaving...

was looking through some old stuff on vwvortex and found these http://forums.vwvortex.com/zerothread?id=1962106&page=1 now i was wondering if anyone has fitted a set to their leons and what their opinions of them where and also if anyone knew a british supplier of camber plates

lowered my car at the weekend and the camber on the front seems to be out by quite a bit now. How can i change it? pic shows you what i mean:

Erm well ive lowered my LCR about 40mm and had my tracking done but still have really bad uneven tyre wear both front and rear. Ive been looking up the LCR geometry and noticed that next to camber adjustment front and rear it says 'not adjustable' :confused: So my question now is surly...

My friend had a set on his polo but i was wondering if anyone knows if they are available for the ibiza cupra? Cheers

Hi guys, I know this has been covered before but i couldnt find a definitive answer. Does anyone know if (and how) the front camber can be adjusted on a cupra R. Is there anybody that has had their camber adjusted and recommend any garages. I have it booked in for SEAT but i doubt they...

http://www.h-r.com/index.php?inhalt=produkt-f&sprache=en Are these any good? My front tyres wear out on the outer edges a lot, even if they're pumped to 2.7bar. I guess I need to slightly adjust the camber up front.

The front camber is out on my car, but the question is how to adjust it? I'm pretty sure you have to move the subframe but has anyone else done this? I'm not going to do it myself but how realistic is it to ask the tyre company to do it? Is it a big job or pretty simple? Thanks.