caliper

Hi, Is it ok to paint my ap racing calipers with hammerite paint? they look like they have plastic type coating (as standard) and just want to confirm that the paint will work on these? and also, has anyone got any or know if anyone sells SEAT SPORT white decals for the calipers so i can...

I noticed the other day that the brembo caliper on my front passenger side has got some dis-colourment on it, like its faded to a whiter shade on one part. After closer inspection it looks like the top film layer of the caliper has peeled off somehow leaving a whiter shade. Could...

It seems Ford part ( F6141154 ) will work nicely with standard Mk2 or Mk3 Ibiza Cupra front brake calipers if your sliders cease like mine have. If it's confirmed, could that get added to the Parts FAQ? It's advice from Fl@pper, not from me, but it took me about an hour of Googling to find...

Hi, Am off work tomorow so have a full wkend to play with the leon :funk: One of the things on the ever growing list is refurb both the front and rear calipers. My question is will i be able to get the lacquer required from anywhere tomorow morning ? Maybe halfords or a motor factors ...

Hey guys :) I have just purchased some Halfrauds yellow caliper paint and am all set to get a painting later on today. Just wondering if anyone has had any experience in using this paint and if they have any tips like the best number of coats to use etc. Thanks for your thoughts in...

2 questions 1) Has anyone used it? 2) Is it any good?

I'm leaving for the ring oin the morning and the caliper is leaking out of the bleed nipple. Anyone had this problem? The nipple undos halfway but then wont loosen anymore. Where would i get a new brembo caliper???????????? please help

My custom caliper clips. Found out to buy the ones for an Audi S3 from dealpership and rename would be too pricey so this was my attempt at the same (for alot cheaper) :D http://seat-sport.co.za/forum/viewthread.php?forum_id=14&thread_id=5653

what is the fitting on a 1995 mk2 seat ibiza cls 1.4 cuz i REALLY cant get them out (well say them there is only one left) ne help would be very welcome cuz i need it done asap thanks ppl

Hi, Well after having one of my rear brakes stick and cooked my pads and disc up i upped for some new ones. now after changing one side fine, i came to the other side and the piston only just went back in after brute force with the wind back tool so pumped brakes again to push it back put...

Hey, After some replacement parts being fitted, I have been told the front nearside brake piston is stuck in abit, so that the brake slighty rubs on the disc when driving. This can also be felt when actually applying the brake, as the steering wheel wobbles as one side is braking more than...

hello again you will all be happy when i stop posting about my brakes soon :) lol basically i am under the understanding i need a fitting kit to fit the brake discs and pads ect to my car i believe the Seat Part number is 6LL 698 295 and is £60 i know you can buy the part seperatly but...

As title what is the part number for the Ferodo DS2500 pads that fir the Cupra Mk 4 with AP Calipers. thanks Lee

Found this earlier - interesting read... http://www.bigpower.co.uk/forum/viewtopic.php?t=3229&highlight=caliper

-------------------------------------------------------------------------------- HI EVERYONE I POSTED THIS EARLIER Boost problem -------------------------------------------------------------------------------- have a problem with my cars boost, i was driving on motroway last night...

im looking at some new sliding pins for my rear calipers as the ones ive got on mine are a bit battered does anyone know the part numbers and prices for these as local seat garage are useless, any help would be hugely appreciated.

On my Mk1 Toledo rear brake caliper piston I have 2 little notches, does this mean I need the little rewind tool and wind it in or can I just push it back in with a G clamp ? Thanks.

right doin me head in now think somebody has welded the two allen bolts on any ideas how to get them off without a grinder ?:lol:

Hello All, I am working on a 312mm front brake upgrade on my FR+ TDI, trying to get hold of the right bits from an Audi S3, TT or Skoda Octavia VRS. Not as easy as I thought. Does anyone have the part number for the 312mm front brake caliper carriers?? Any help would be great...

Article now located in the resources section of the site https://www.seatcupra.net/forums/resources/seat-sport-cupra-brake-caliper-info.83/