bit

  1. Bit of info for anybody that has had problem with engine cutting.

    Just a little bit of information for any Ibiza Mk3 owners that may have had the same problem as myself. I had problems with my TDi cutting out intermittently without any warning, no fault codes detected either. I started to trace all the fuel lines and check the lift pump was working ok - all...
  2. Vibration and engine moving a bit on tickover

    I noticed the other day when I was parked up a lights I could feel the car rocking back and fourth the engine sounded like it was missing a bit. So when I got home and lifted the bonnet up I could actualy see the engine rocking back and fourth about 1 to 2 inches in both directions. Could this...
  3. lcr sounds a bit rough!!!!

    when i was driving home the other night my car suddently started juddering and wudnt really go over 2500k in any gear, thought my car had gone in limp mode???? anyone? and the emmissions light on my dash would flash inconsistently! the light was on permanently before due to having a panel...
  4. elliott87

    a wee bit advice on re-mapping

    right, the guy i bought the car from had it mapped with standard everything, apart from DV. i've since then fitted a carbonio CAI, downpipe and sports cat, custome cat-back so just wondering if its worth getting a 4bar fuel regulator thingy and getting it fitted with a new remap? would i see any...
  5. 90bhp leon wanting a bit more power

    im after abit more speed from my tdi :) ..with this being my first diesel not sure whats really best. ive only had the car for 2months and is complety standerd at the min,
  6. gregorcupra

    Bit of play in k03s turbo shaft

    I have a slight bit of play in the shaft of my k03s turbo that I am due to fit at the weekend. Its less than 1mm and when I spin it by hand it doesn't touch. However I am able to push it against the inside of the turbo ever so slightly if I push it. Is this normal?
  7. I fitted a uni intercooler haveing a bit of trouble

    HI ALL I FITTED A UNI INTERCOOLER 2 DAY AND HAVEING A BIT OF TROUBLE WITH THE PIPE THAT GOES TO THE INLET MANIFOLD IT KEEPS FALLING OUT AND THE CLIP IS TIGHT :lol:
  8. suj

    Bit worried my cars messed!?

    well i was going home from uni, and i went to see my old college mate, and i took him to the gym and was driving then out of no where there was a ridiculous dip, and boom, (not scraped, it just jumped rapidly) then loads of water went on my windscreen, at first i thought i hit a puddle, so...
  9. Rory1984

    Bit of a worrying noise when pulling away....

    Hi all, Wonder if anyone can help, my Ibiza has started making a bit of an odd sound as i pull away, sounds as though something is spinning but also grinding just as i pull away, almost like wheelspin but more mechanical. No trouble selecting gears so initially though it could not be the...
  10. Chrisdaman

    Bit of an Exhaust pickle

    afternoon all i've been saving and looking for full stainless systems for the car, it needs a full system to pass the mot, as mine blows at various points. i was looking at a magnex system, the 6" x 4" oval tailpipe desigin, but rang venommotorsport.com and ofund out that magnex have gone...
  11. james walker

    £750 to spend on my car, what should I do...?

    right guys having a few thought and opinions welcome... i have roughly £750 to spend on my baby what i already have is 1. full koni street shocks and springs 2 18 inch inovit cts 3, green induction kit 4. milltek dp and sports cat 5. p-torque stage 1 generic map. 6. liquid tt lcd...
  12. ChrisCurzon

    Maf senor removal bit

    Wonder if anyone knows what the security bit is that i need to remove the maf sensor from the housing i keep getting a fault code for my maf and as i have a spare one was going to swap it into my LCR housing, but i can't seem to find a bit that will fit in so that i can remove the 2 screws...
  13. anti vibration bit for boost guage

    evening all! bought the above, it was recommended in the cheap mods thread but where does everyone fit it? my boost guage comes off a little black round thing on the left of the engine if that makes sense? also to save another thread, when i unlocked my car just now, the red led on the door pin...
  14. Bit expensive? FUJITA Cold Air Intake for leon mk2 cupra

    Pic More info - detailed info http://rpmsperformance.com/filtros.html for sale in the shop http://rpmsperformance.com/tienda/product_info.php?cPath=21_48&products_id=45&osCsid=d3uc80p32hb6g9ao8ip9cjnfp6 Video in action - http://www.youtube.com/watch?v=cB3khHHI_5U&feature=related...
  15. im a bit confused here!!

    right, i need some help if some dont mind as the search button hasnt helped this time.... where do i start. lol. i have no probloms with my car as such, its just iv got a bit stumped, had my car custom mapped running 15psi, and hold quite well, recently i had a small...
  16. Removing plastic bit from dash

    Hi everyone! This is my first post here and my first question. :) Sorry if it has been posted before, i tried searching but didn't find anything useful. I would like to remove a plastic bit between the rear window heater button and the cup holder, because i'd like to fit a custom...
  17. CupraJimbo

    A Bit of help!!!!

    Hey all. I've just got me a mk4 Ibiza Cupra 20v T and am looking at a few additions (despite this being the leave alone car!). Just wondered if anyone had any fead back on the items below before I shell out any hard earned - Koni top adjustables (daily driver so dont want it too harsh!)...
  18. Got a bit hacked with the cupra badges....

    Going all manky and scabby looking, so when i was playing with some decals for the MK1 Golf side of the business I run (see www.vwturbo.co.uk, we also do Carbon stuff [B)]), decided to knock up some sticker overlays for the "spare" R Badge that i had to see what could be done. Well here's the...
  19. Apparently my car is a bit of a looker!

    Before I choose my car and at first I thought my new Leon was fairly nice to look at but not a head turner, I choose it primarily for the engine and equipment but I was wrong about the looks! Walking down the path towards it in Hull I heard a bloke saying to his GF "that's nice isn't it"...
  20. Cordoba broken - loose bit near belt (+pics)

    Since my Leon Cupra was cruelly cremated a few weeks ago i've been driving my girlfriend's Cordoba. Last night the power steering failed and it started making a lot of noise. I've taken a look this morning and the power steering reservoir is empty. I've also found what appears to be...
SEATCUPRA.NET Forum merchandise