arb

just fitted the 28mm neuspeed rear arb to my lcr and was just wonderin wat was the best hole 2 put the droplink in.i have it in the hole closest to the front of the car.is this the stiffest??cheers

was just lookin at awesomes site for a rear arb for my 2005 lcr.which one suits my car as it doesnt say on the site.here is the link.......http://www.awesome-gti.co.uk/store/section.php?xSec=355 cheers

Been doing lots of reading over the past couple of days, thanks to everyone who has provided info on suspension. Just wanted everyone's opinions on the following mods: Audi S3 lower brace, with a rear H&R ARB and a rear brace. Bit skint at the mo, so can't get a whole new setup, but will...

Just had my adjustable coilovers fitted day ;) Now shes riding nice and low BUT in order to get them on the garage has not reconnected the anti-roll bar as the kit does not allow for this connection??? :blink: Now does this sound like I have the wrong kit or possibly iam just missing a...

On my way way to work this morning I heard a loud rattle coming from the front suspension when I drove over bumps. In my dinner break I went out and had a look at the car in daylight and I noticed this on my drivers side front . Can these parts be ordered separately? Do I need a press to...

for those who have had arb's fitted front and rear, any estimate on prices for labour for fitting and how long does it take? also did you get a wheel allignment after, as heard this is almost essential after the job. any recommendations around the south west, bristol or any other good...

Its knocking on something.... something i assume to be my exhaust backbox :censored: Will have to have a look when its light tomorrow but its coming from the passenger side at slowish speeds so i reckon thats what it is. Anyone else had this problem with an Eibach rear ARB?? I did a lot of...

Hi, I've got a 2003 Ibiza TDI 130PD Sport. I am going to buy all the bits to uprate my ARB to the Cupra one. Do I just need the ARB and bushes or will I need new droplinks too. Also is there anything else I should get replaced / inspected by the garage when they are fitting this. I take...

I'm getting a Fabia vRS front ARB (21mm) fitted in the next week or so. Is there anything I should think about changing at the same time as getting the ARB fitted? (other than the bushes that came with the ARB) The car has done just over 30k. Thanks

From what I know, these aren't a straight fit - talking about a 28mm rear item that is normally fitted to Golf MK2/3 models What is needed to be altered or made to get these to fit my beeza? (its a P reg 8v GTI if that makes any difference) Ta Chris

What sort of differences do you get between the 2 sizes and is one better than the other or do they both have there plus points

Hi This weekend i decided to fit a Cupra ARB on my PD130 to go with my previously installed Cupra suspension:D But now i wish i didn't.. Ever since,i have been getting a very loud clunking noise from the driver side, usually when i go over bumps whilst driving. You can also hear it if...

Heres the problem, for about 3 weeks now my car has been making a strange creaking noise coming form the front passenger side wheel area. When I first looked and heard the noise I thought ARB had gone, when I looked at it the noise seemed to be coming from the drop link where it attaches to the...

Hi, I did a search but didnt find out exactly, have read that the r32 goes under the driveshafts instead of over them. But does it fit? Thanks, Neil.

Seeing as though I'm doing the wishbone bushes I thought I might as well order a full set. Anyone fitted the Powerflex anti-roll-bar bushes to an Ibiza mkiV?

Hi all, I was wondering how a rear ARB on a leon will make any difference as the leon/golf chassis has a solid rear axel. I was looking under my car and can't figure out how it will make any difference as the mounting points for the ARB are part of the solid rear beam? Any ideas? Neil.

Fitted the Cupra ARB as part of a suspension upgrade and can defo say that its made a great improvement on the front end. It seems more planted on the road now, especially through the country lanes:D . Heres the Pt Nos if people are interested. The bar fits straight onto your original drop...

As the title says really, I have been told that the arb on gti's is part of the rear axle, so you cant put one on a non gti. Is this true? Has anyone managed to put one on a non gti axle, If so how and what bits do I need. Cheers, Jon

I used the search option but didn't find the answer. I know the front arb from a golf mk2 will fit, but what about the rear? Which arb do you need for the rear?

I've got some suspension work to do on my MK4 TDI and was wondering if the larger ARB is a good upgrade in addition to the Eibach Prodamper kit I'm finally putting on. There is currently play in the ARB bushes so: My Options: 1. Just replace with OEM bushes 2. Fit the Fabia vRS ARB...