adjusting

Hey all, Need some help if you don't mind, Car: Seat Exeo 3R 120 HP 1986CC Year: 2010 As the title says, on the web for the last 2 hours and can not find a motor factor who has it or sells it. I tried to look under the seat to get a oem number or something, but with no luck. Did found a thread...

Well i didn't know that:happy:

I'm hoping to be running my LCR at 150 Kgs below the OEM weight soon at 1,200 Kgs Is there a caculation to allow me to work out what tyre pressures I should run now. For the track I've been running 2PSI (hot) higher than recommended 33 PSI on the front and 33 PSI (hot) on the rear. This...

Found this on an American VW site. http://vimeo.com/6881683 If you have problems getting into gear this will help you discount the linkages. Some of us have aftermarket GB linkages. When I fitted mine I didn't do any of this and still sometimes have an issue with getting into 2nd...

can somebody remind me of the process. tighten up till theres no play and the nut is tight then let it off a little bit? :think:

Morning all, nice easy one for you.... How do i set the clock in my car? The clock is an hour out from the last time adjustment. I drive a LCR(54plate) Many Thanks Marv

Mine was within manufacturers spec, but would be desirable to adjust according to the shop, is there anyway of doing this?

Has anyone actually done this? If so what settings were used? Also how much did they charge? Thanks.

Noticed it was adjustable, since I can't see anyone that has done it from searching, then I presume it plays havov with the electrics?

When you switch on the lights, the sequence for the Xenon equipped cars is adjust down, adjust out to the side, back to centre, then back up. Mine misses the down up cycle, and when driving the car in the dark, it appears they are stuck in the down position. I have done a search and have not...

fitted the kit for the leon with 21" and 19" blades a few weeks ago and they look great, but passenger side blade sits on the plastic surround at the bottom of the windscreen and needs adjusting now am i correct in saying i need a lot of wd40 to get it to move as it didn't last time, and that...

have been trying to adjust the passenger wiper, but i can't seem to get the arm off to change the position. Can't apply to much force to get it off due to the plastic surround, tried wd40 to help but still the arm won't come off. Can anyone advise on this

hi i have just replaed me pedal box on the ibiza but the cable seems to be to small to fit back where it was dose any 1 knows how i put some slack in it so it wil be long enough cheers

Just quick question hopefully. Does anyone know how to adjust the lights on the Leon? I got my car lowered back in Feb and noticed that during night time driving that the lights does not have a really good range (using Orsam 90% Nightbreakers) Is this an easy thing to do or best left to the...

I have had to take the pedal box bracket out due to the clutch cable bracket failing, im trying to get the old clutch cable out, but the self adjusting mechanism just wont compress, does it make a difference if the cable is already unhooked from the end of the pedal? (Didn’t have much choice in...

hey. since having my new rear discs and pads put on, i get a lot of play in my handbrake, and its not working properly. the handbrake can be freely moved about an inch or 2 without it clicking or the handbrake light coming on. after that, i have to pull it as far as it'll go to grip! is...

afternoon all, fitted my new h&r cup kit yesterday put car back on its wheels and the tracking and camber is a mile out (as expected) how do you adjust the camber? is it done on the shock/hub bolts? and most importantly will the garage now how to adjust it if it can be? going to take it to demon...

Should I be adjusting my rear strut brace to push it outwards to tension the bar against the bodywork? How tight have other done it? Its the Raid HP type brace, the undrilled one. cheers

just wondering if you can adjust the actautor to squeeze out more power on my ibiza 20vt until i save up for a remap. by winding it out would it incease the psi?? ive done a search but cant find what im looking for. cheers in advance adam

Havent had the car back long from a rebuild and i'm getting a camshaft position sensor error. I've checked the timing marks/flywheel and the belt is on correctly. Next check was the CPS itself, was fine. So i took the cam cover off at TDC to see the front cam off by one tooth, rotated...