• Guest would you be interested in CUPRA or SEAT valve caps? let us know in the poll

  • Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.

Platinum Seat Leon FR TDI - 4 Day Mega Detail - 35 hours

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
mk1 Platinum Seat Leon FR TDI – The FullWerkes Paint Correction Detail

With my new detailing cave ready, I decided to get my car in there and see what I could achieve in nice working conditions. I think I got a little carried away and turned into something a little comprehensive.

Here are the products I used.

Products
Wash n Drying
Dodo Juice Supernatural [body work and wheels]
Meguairs All Purpose Cleaner [Plastics and Rubbers]
AutoSmart G101 [interior + wheels + Engine]
Valet Pro Snowfoam [body]
PB Super Plush Drying Towel [body]
Wolfs Chemicals De-ironiser [wheels and body]
Chemical Guys + Eurow microfibres [body]

Body Work
Elite Car Care fine polyclay [body]
AutoSmart ReGlaze [Body + anything else]
AutoSmart Tardis Tar and Glue Remover [body and wheels]
Menzerna Intensive Polish (PO 3.02) [spot defect correction]
AutoFinesse Rejuvenate [body and hard to reach areas]

Sealants and Waxes
AutoGlym HD Wax [LSP]
AutoFinesse Tripple [door shuts]
Dodo Juice Need for Speed [engine]
Werkstat Prime [Wheels + headlights + glass]
CarLack Pure Sealant [Wheels]

Plastics, Rubbers and Glass
Megs Tyre Endurance Gel [tyres]
3M Glass Cleaner [glass exterior]
AutoBrite Crystal [glass interior and exterior]
AutoBrite Repel [windscreen]
3M Leather and Vynil Restorer [Interior]
WD40 [plastics and rubbers]
AutoSmart Finish [Plastics + engine parts]

Tools
Dodo Juice Spin Doctor rotary
Karcher pressure washer
CYC Foam Lance
Various foam applicators
EliteCarCare Sonus polishing pad + lake country spot pads.
Swissvax Detail Brush
EZ Detail Wheel Brush
3M 3434 Masking Tape


I made a slide show video (it’s my first one) for those who want to have a bit of music with the pictures. *Not all pictures are included in the vid*

http://www.youtube.com/watch?v=uxFCw5aFeSE&fmt=22
 
Last edited:

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Body and wheel decontamination

- Body and wheels soaked with Wolf’s Chemicals Deironiser
- Arch liners sprayed with CG Orange Degreaser and then agitated with Autosmart G101
- Wolf’s deironiser jet washed from alloys and then cleaned with Bilberry wheel cleaner and G101
- Engine degreased with Autoglym Engine Cleaner, agitated and jet washed. It was then sprayed with AutoSmart Finish and left to dry on for 10 minutes.

DSCF3650.JPG


DSCF3651.JPG


DSCF3652.JPG


DSCF3653.JPG


DSCF3655.JPG


DSCF3656.JPG


DSCF3657.JPG


DSCF3658.JPG


DSCF3659.JPG


DSCF3660.JPG
 
Last edited:

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
DSCF3661.JPG


DSCF3662.JPG



By this time the Wolf’s DeIroniser was really working well and was causing some bleeding on the front arches / door.

DSCF3663.JPG


DSCF3664.JPG



Car was then foamed with ValetPro Snow foam and washed with Dodo Juice Supernatural. Dried with a PB Plush Drying Towel.

DSCF3665.JPG


DSCF3666.JPG


DSCF3667.JPG


DSCF3668.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Inspection of bodywork

Here is what the bodywork was like prior to claying. I was pretty pleased that virtually swirl free after 9 months since she was last machined polished.

The bonnet and roof were the worst in terms of defects.

DSCF3670.JPG


DSCF3673.JPG


DSCF3674.JPG


DSCF3676.JPG


DSCF3678.JPG


DSCF3679.JPG


DSCF3680.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Claying

Bodywork was clayed with EliteCarCare fine poly clay. Windows were also clayed. Body was then sprayed with Autosmart Reglaze and dried with a microfiber. Windows came out very clean, amazing what claying them does.

DSCF3685.JPG


DSCF3686.JPG


DSCF3687.JPG


DSCF3689.JPG


DSCF3691.JPG



Correction Stage

Paint readings were taken all over the car. No areas of concern and very healthy paint readings all round. As some of you may know I been buying fair few products to add to the collection and recently purchased a few AutoFinesse products. I have seen some really good results from a few users on DW so decided to see how AutoFinesse Rejuvenate really was.

DSCF3692.JPG


DSCF3695.JPG


DSCF3696.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Bonnet

Before – in this picture see the type of defects present
DSCF3698.JPG


After – defects taken out.
DSCF3699.JPG


Before – middle of bonnet
DSCF3703.JPG


After
DSCF3705.JPG


After – bonnet far right
DSCF3707.JPG



There were still some defects left that really needed more attention. This was done later in the detail with a polishing pad and Menz IP.

DSCF3711.JPG



The performance of Rejuvenate was excellent and in many ways works better than Lime Prime.

+ Goes on very easily and can be worked in quite quickly.
+ A little goes a long way
+ Very easy to buff off. Much easier than lime prime
- Product tends to sling a lot. Wish it was a tad thicker

DSCF3708.JPG


DSCF3709.JPG



Right arch & door corrected

DSCF3713.JPG


DSCF3714.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Before
DSCF3716.JPG


After
DSCF3717.JPG


DSCF3720.JPG


DSCF3723.JPG


DSCF3725.JPG


DSCF3726.JPG



This picture is the roof after one hit of Rejuvenate. Required a second hit and higher RPM (1500) to get enough cut to get rid of the deeper RDS.

Before
DSCF3728.JPG


After
DSCF3731.JPG


DSCF3732.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Some areas needed some special attention to get rid of some scratches.

DSCF3734.JPG


DSCF3736.JPG



Wing mirrors responded well to Rejuvenate

Before – dull
DSCF3740.JPG


After – more flake pop and cleaner reflection of light.
DSCF3741.JPG



Nasty scratch on front light, no idea how that got there but I wasn’t pleased. Luckily I managed to get majority of it out with some Menz IP.

Before
DSCF3745.JPG


After
DSCF3749.JPG



I compounded the bonnet again as I tried various combinations of light to try and identify all the RDS on there. I picked Menz IP and a EliteCareCare heavy polishing pad to good affect but it produced a bit of dusting.

DSCF3751.JPG


DSCF3752.JPG


DSCF3753.JPG


DSCF3755.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
DSCF3756.JPG


DSCF3757.JPG



Cleansing continued

Driver and passenger windows were treated with Werkstat Prime.

DSCF3758.JPG


DSCF3759.JPG


DSCF3761.JPG


DSCF3762.JPG



Door shuts were cleaned with AutoSmart Reglaze.

DSCF3763.JPG


DSCF3764.JPG


DSCF3765.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Before
DSCF3767.JPG


After
DSCF3768.JPG


DSCF3771.JPG


I also managed to clean the plastic behind with great difficulty.

DSCF3777.JPG


DSCF3781.JPG



This now gave me the opportunity to use AutoFinesse Tripple. This is an amazing all in one cleaner! I am so so impressed with it and the best thing apart from its cleaning/protection capabilities is you can smell its cleaning power. If I was a druggy I would be high on this stuff lol!

DSCF3782.JPG


DSCF3783.JPG


DSCF3784.JPG


DSCF3786.JPG


DSCF3787.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
DSCF3789.JPG


DSCF3792.JPG



I also gave the bumper a good clean and the cold air feeds. Amazing how much crap built up around the plastic mesh. This was tackled with G101 but not after pictures.

DSCF3793.JPG


DSCF3794.JPG



Plastic and rubbers where given a good wipe with WD40. Works very well and leaves a nice finish. They were treated with AS Finish later.

DSCF3796.JPG


DSCF3797.JPG



Boot shuts were treated with AutoFinesse Tripple also. The plastic was cleaned with WD40 also but no afters I am afraid.

DSCF3799.JPG


DSCF3800.JPG


DSCF3802.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Day 2

On the second day I decided to take some pictures of what the car looked like.

DSCF3803.JPG


DSCF3804.JPG


I started to inspect the paintwork more carefully to ensure that the finish was as flawless as possible. Some spot correction was done on defects that caught my eye.

DSCF3809.JPG


DSCF3813.JPG


Menz IP doing it’s thing!
DSCF3814.JPG


DSCF3816.JPG


DSCF3817.JPG



I decided to give the tyres another clean with Megs APC to ensure good bonding with Megs Endurance gel.

DSCF3820.JPG


DSCF3822.JPG


DSCF3823.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Wheels were treated with Werkstat Prime as its got amazing cleaning solvents and adds protection too.

DSCF3824.JPG


DSCF3827.JPG


DSCF3828.JPG



Glass was treated with AutoBrite twins. Repel needs two three applications on untreated glass to get longevity.

DSCF3830.JPG


DSCF3831.JPG


DSCF3832.JPG


DSCF3854.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Whilst I was waiting for AutoBrite Repel to cure I started on the interior.

DSCF3833.JPG


DSCF3835.JPG


DSCF3838.JPG



The Flash caught some particles that where quickly vacced up.

DSCF3839.JPG


DSCF3840.JPG


DSCF3841.JPG


DSCF3842.JPG


DSCF3843.JPG


DSCF3845.JPG


DSCF3846.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
ALL of a sudden a massive shadow went past me. I thought it was a bird (big enough to be!) but it was a huge moth animal thing.

DSCF3862.JPG



Before
DSCF3863.JPG


After
DSCF3864.JPG



Before
DSCF3865.JPG


After
DSCF3866.JPG


DSCF3868.JPG



Before
DSCF3870.JPG


DSCF3871.JPG


DSCF3873.JPG


DSCF3875.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
DSCF3879.JPG



After
DSCF3876.JPG


DSCF3878.JPG


DSCF3883.JPG



Car matts where cleaned with Autosmart G101. Doesn’t product as much foam as Megs APC but cleans very well.

DSCF3887.JPG


DSCF3888.JPG


DSCF3889.JPG


DSCF3893.JPG


DSCF3894.JPG


Plastics treated with AS Finish.
DSCF3895.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Again this areas was vacced and cleaned again to get rid of the stubborn particles.
DSCF3898.JPG


DSCF3899.JPG


DSCF3901.JPG


DSCF3904.JPG



Interior windscreen was Crystalised.

DSCF3905.JPG


DSCF3906.JPG


DSCF3909.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Day 3 & 4

Day three I was pretty tired however the end was in site. Wheels looked especially clean so took some random pictures of these.

DSCF3910.JPG


DSCF3912.JPG


Rear glass wasn’t treated with Werkstat as I planned to add some AutoBrite Repel. Gave it a good clean beforehand and then applied AutoBrite Repel.

DSCF3913.JPG


DSCF3914.JPG


Repel curing; it hazes up when worked in lightly. You have to leave this for at least 15 minutes.
DSCF3915.JPG


Whilst cleaning the rear window I was horrified to see a scratch I didn’t notice before.

Before
DSCF3917.JPG


After
DSCF3919.JPG
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
LSP

Wax of choice was Autoglym HD wax. I still have the second coat to put on which I will do Friday morning.

DSCF3920.JPG


DSCF3921.JPG


DSCF3922.JPG


DSCF3923.JPG


DSCF3924.JPG


DSCF3925.JPG


DSCF3926.JPG


DSCF3927.JPG


DSCF3928.JPG


DSCF3929.JPG
 
Lecatona HPFP (High-pressure Fuel Pump Upgrades)