Jetex Induction Kit/Cone Filter.

J0N · Nov 10, 2009

I'm considering getting one of these, the price is'nt bad and the blue will compliment my
engine bay. Any thoughts, advice, pictures would be appreciated.

james walker · Nov 10, 2009

heard good things about them.. and a member has had huge maf readings with one fitted.

harty190486 · Nov 10, 2009

james walker said:
heard good things about them.. and a member has had huge maf readings with one fitted.

Thats me, cracking filter cant go wrong as long as you get the right 1 i am seeing between 213-216gs on my maff, pulls like a train and the turbo defo spools up sooner and quicker, as long as you get a good air feed you will be sorted

harty190486 · Nov 10, 2009

hers a pick not the best its quite a big filter

J0N · Nov 10, 2009

I've seem the logs, that's what's got the cogs turning lol. Good pic too, have you got any sort of part number and/or a price? I'm assuming this is the one; KSE11. Clicky.

EDIT. Don't order a KSE11 induction kit if you have an LCR (80mm MAF), it's the wrong one! :redface:

gezmeister · Nov 10, 2009

harty190486 said:
hers a pick not the best its quite a big filter

Where did you buy it? And how much did you pay, if you don't mind me asking?

harty190486 · Nov 10, 2009

Jonnyjonjon said:
I've seem the logs, that's what's got the cogs turning lol. Good pic too, have you got any sort of part number and/or a price? I'm assuming this is the one; KSE11. Clicky.

The part number which is the 1 closest to mine is FC-08001 mine is slightly diffrent as its got the fixing pin in the end but easy enough to do that yourself
heres the link mate hope this helps
http://www.jetex.co.uk/website/conicalfilters.php?insided=80mm

JamJay · Nov 10, 2009

Is the filter a twin-cone, like the Green twin-cone? That will help will help with MAF readings surely as the CAI will be pointing directly into the centre of the filter and not the solid end of it like most cone filters.

harty190486 · Nov 10, 2009

JamJay said:
Is the filter a twin-cone, like the Green twin-cone? That will help will help with MAF readings surely as the CAI will be pointing directly into the centre of the filter and not the solid end of it like most cone filters.

No mate its just a solid chrome ended cone type it is rather big really does suck well have heard nothing but good things about jetex mate i rate it anyway

JamJay · Nov 10, 2009

MAF readings sound awesome mate, I am tempted by this Green one though. LC is 70mm MAF & LCR is 80mm MAF?

harty190486 · Nov 10, 2009

JamJay said:
MAF readings sound awesome mate, I am tempted by this Green one though. LC is 70mm MAF & LCR is 80mm MAF?

i think thats right for the LC but LCR is defo 80mm tho mate if you go for the green let us know how it goes and what it gs it pulls

adam cupra 20vt · Nov 10, 2009

yeah LC is 70mm

JamJay · Nov 10, 2009

Well it'll be going on my LCR so the readings will be different but either way, it'll show either and increase or decrease in airflow which shouldn't be any different for either application (LC or LCR). I may need to trim the connection a little though so it fits with my Neuspeed shield.

DPJ · Nov 10, 2009

I've been running an open cone Jetex for nearly two years. Wouldn't use anything else now.

JamJay · Nov 10, 2009

Can different cone filters really make alot of difference, i.e. how free flowing they are? I have suspected my Neuspeed may not be the most efficient for a while now.

harty190486 · Nov 10, 2009

JamJay said:
Well it'll be going on my LCR so the readings will be different but either way, it'll show either and increase or decrease in airflow which shouldn't be any different for either application (LC or LCR). I may need to trim the connection a little though so it fits with my Neuspeed shield.

If its a good filter you should be around the same as mine, mines a LCR like yours

james walker · Nov 10, 2009

DPJ said:
I've been running an open cone Jetex for nearly two years. Wouldn't use anything else now.

which size dave?

looking into one now.

DPJ · Nov 10, 2009

james walker said:
which size dave?

looking into one now.

It's rated at about 410 bhp

james walker · Nov 10, 2009

is it hugemongous mate? i want a friggin biggun!!! want to compare between standard size and a mammoth.

can only see 311bhp for 70mm maf, im guessing you have lcr maf anyways.

202mm length and 100mm outside diameter... anyone know dimensions of say a k&N

J0N · Nov 10, 2009

Just ordered one of these.

Top O/D 140mm, Bottom O/D 175mm, Length 172mm. Lovely.

Jetex Induction Kit/Cone Filter.

Defected!

cooling is the key people

POWER!!!

POWER!!!

Defected!

I need a derv!!

POWER!!!

California Bound

POWER!!!

California Bound

POWER!!!

Built Not Bought.

California Bound

...........

California Bound

POWER!!!

cooling is the key people

...........

cooling is the key people

Defected!

Similar threads