Leon Cupra 03 Paint Correction Detail – Lots of pictures!

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
I remember Soundwave saying to me his paint was really tired and the previous owner did not look after the car that well. Since I done my last detail I was pretty confident that I could at least give some marked improvement on what Soundwave already had. So the deal was done and a date and time was agreed and the car turned up like this:

LC03Before1.jpg


LC03Before2.jpg


LC03Before3.jpg


LC03Before4.jpg


LC03Before5.jpg


LC03Before6.jpg


LC03Before7.jpg


LC03Before8.jpg


As you can see from the pictures above the paint looked tired and was in definite need of some TLC.


Products

Wash n Drying
Autoglym Shampoo and Conditioner (wheels and wheel arches)
Meguairs NXT Tech Shampoo (body work)
Meguairs All Purpose Cleaner
Sonus Drying Towel
Meguairs Microfiber Clothes

Body Work
Cleanyourcar fine polyclay
Meguairs NXT Tech quick detailer
Menzerna Intensive Polish 85RD3.02
Menzerna Final Finish (PO 106 FA)

Sealants and Waxes
Meguairs NXT Tech Wax
Collinite 476s

Plastics, Rubbers and Glass
Mer Plastic, Rubber and Vinyl restorer
Chemical Guys Wheel Guard
Turtlewax Glass Cleaner
Turtlewax GUNK Tyre Gel

Tools
Meguiars G220 mk2 machine polisher
Karcher Pressure washer
Snow foam Lance
Myriad of foam applicators
Menzerna Compound Pad (White)
Menzerna Polish Pad (Orange)
Meguiars Triple Duty Detail Brush
Meguiars Wheel Spoke Brush
Meguairs interior brush
Two-Way Mini Detail Brush
3M 3434 Masking Tape
 
Last edited:

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Wheels were cleaned first. I opted to use Megs APC at a weak dilution ration of around 8:1. Once the APC was worked in I then proceeded to wash wheel sheep wool mitt. The wheels were then clayed and Chemical Guys Wheel Guard applied.

LC03Wheels1.jpg


LC03Wheels2.jpg


LC03Wheels3.jpg


LC03Wheels4.jpg


Snow foam then applied.

LC03Snow1.jpg


LC03Snow2.jpg


LC03Snow3.jpg


When the snow foam wash off it reveal the car has no protection at all which was concerning.

LC03Snow4.jpg


LC03Snow5.jpg
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Rubber seals were cleaned with Megs APC

LC03APC1.jpg


LC03APC2.jpg


Car was then washed with Meguairs NXT Gen shampoo. Having used a dozen different shampoos this has to be up there with best of them and I actually now prefer this over Megs Cold Class. It produced much more foam and its cleaning capabilities were much better. Left a real slick feel to the paint.

LC03Nxtwash1.jpg


LC03Nxtwash2.jpg


Drying the car

LC03Drying1.jpg


LC03Drying2.jpg


LC03Drying3.jpg


The car was then claying with cleanyourcar poly clay.

Clean Clay
LC03Clay1.jpg


Right side of the car
LC03Clay2.jpg


Left side of the car
LC03Clay3.jpg
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
As you can see there was an immediate improvement to the look of the car.

LC03Clay4.jpg


LC03Clay5.jpg


Upon close in section of the car removing all the dirt using the clay showed swirls and marring from the cars life.

LC03Swirls1.jpg


LC03Swirls2.jpg


LC03Swirls3.jpg


With the car all cleaned, the car was taped up and a test area was created to see which pad/polish combo worked the best.

LC03Testarea1.jpg


LC03Testarea2.jpg


In the end it was between using Menzerna intensive polish with either the compound pad or the polishing pad. I opted for the polishing pad as it was the least aggressive method.

LC03Testarea3.jpg


Bonnet now done! Massive different and around 85% swirl correction.
LC03Bonnet1.jpg


LC03Bonnet2.jpg
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Arch
LC03Arch1.jpg


LC03Arch2.jpg


Door – littered with swirls, RDS and deep a scratch.
LC03Door1.jpg


A lot of the swirls have gone apart from that deep scratch.
LC03Door2.jpg


Boot – Scratch heaven
LC03Boot1.jpg


LC03Boot2.jpg


LC03Boot3.jpg
 
Last edited:

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Very pleased with how the bonnet turned out. I had to use the compound pad to work out the deeper swirls and scratches.

LC03Boot4.jpg



Rear Arch - Defects
LC03Rear1.jpg


LC03Rear2.jpg


LC03Rear3.jpg


Right Rear Arch – More Defects

LC03RearR1.jpg


LC03RearR2.jpg


LC03RearR3.jpg


The whole car now was all Menzerna upped and read for some sealants/waxes.

LC03Menzerna1.jpg


LC03Menzerna2.jpg
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Once I applied a thin layers of Megs NXT Tech Wax and buffed off I then proceeded apply Collinite 476s.

LC03Collinite476.jpg


Thank you to Soundwave for cleaning the inside of the car whilst I was working on the outside. The inside was treated with Mer Plastic and Vinyl restorer, glassed cleaned with Turtlewax Glass Cleaner and finally the leather parts were cleaned with Lord Sheraton Leather Balsam.

Here is the end result of a good 8 hours worth of work.

LC03Inside1.jpg


LC03Inside2.jpg


LC03After1.jpg


LC03After2.jpg


LC03After3.jpg


LC03After4.jpg


LC03After5.jpg


LC03After6.jpg


LC03After7.jpg
 
Last edited:

Soundwave

Active Member
Aug 18, 2007
167
0
Basildon, Essex
Absolutely amazing work ... bet he's very pleased with the result :)

Thats something of an understatement ;);)

I am totally over the moon with how it turned out.

Pretty much everything that could be tidyied up has been the difference is amazing.
Lots & lots & lots of hardwork on Maz's part have totally transformed how it looks.

I just stand & stare at it for about 5 minutes before I get in for a drive now :)
The fiancée has stopped using her mirror & checks her make up & hair in the paintwork now it's that good ;) lol

I cant say thanks enough for all of Maz's hard work yesterday...especially since it was his birthday too...could think of a million things I'd rather be doing than cleaning somebody elses car but nope he spent 8hrs doing a fantastic job.

Thanks again Maz it really really is appreciated.

Neil
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Thats something of an understatement ;);)

I am totally over the moon with how it turned out.

Pretty much everything that could be tidyied up has been the difference is amazing.
Lots & lots & lots of hardwork on Maz's part have totally transformed how it looks.

I just stand & stare at it for about 5 minutes before I get in for a drive now :)
The fiancée has stopped using her mirror & checks her make up & hair in the paintwork now it's that good ;) lol

I cant say thanks enough for all of Maz's hard work yesterday...especially since it was his birthday too...could think of a million things I'd rather be doing than cleaning somebody elses car but nope he spent 8hrs doing a fantastic job.

Thanks again Maz it really really is appreciated.

Neil

Most welcome Neil :)

Looks absolutely brilliant.. a huge improvement..

What's the crack with this snow foam stuff? How do you apply it and what's the purpose of it?..

Snow foam basically breaks down the containments on the car and clings to it so when you rinse you get a cleaner car to wash. Reduced the chance of getting swirls on the paint when you wash.
 

PaulD

Full Member
Jan 12, 2006
141
0
Teesside, North East
Snow foam basically breaks down the containments on the car and clings to it so when you rinse you get a cleaner car to wash. Reduced the chance of getting swirls on the paint when you wash.

Thank you.. Do you add it to your pressure washer or something? I've got a Karcher with a little tube for adding shampoo (I presume)..
 

UncleFester

Grumpier by the day!
Apr 30, 2006
4,764
2
Milton Keynes
www.facebook.com
I cant say thanks enough for all of Maz's hard work yesterday...especially since it was his birthday too...could think of a million things I'd rather be doing than cleaning somebody elses car but nope he spent 8hrs doing a fantastic job.

Neil

As i'm sure Maz has told you, it's not about the work, it's not really about the money or time .... it's all about the satisfaction and the end result.

I love polishing paint, done a few cars now and it's ALWAYS worth it - the best bit is seeing the owners face when they see the improvement.

However as you've no doubt seen, it IS hard work but it's definitely worth it.
 

Soundwave

Active Member
Aug 18, 2007
167
0
Basildon, Essex
As i'm sure Maz has told you, it's not about the work, it's not really about the money or time .... it's all about the satisfaction and the end result.

I love polishing paint, done a few cars now and it's ALWAYS worth it - the best bit is seeing the owners face when they see the improvement.

However as you've no doubt seen, it IS hard work but it's definitely worth it.

Oh no Maz did say yesterday how much enjoyment he got from it & was greeted by a very puzzled look from myself :lol::lol:

However having seen it all done first hand & had a part to play in the finished article (Alhough admitidly it was a VERY small part ;)) I can see the attraction of detailing a car to the finish Maz achieved yesterday it is VERY satisfying.

Neil
 

jonjay

50 Years of 911
Jun 27, 2005
5,843
1
Essex
Glad you liked it.

Yes I do enjoy it for sure. I must admit half way through when my back got a strained a little having the girlfriend there was a great help! :)
 
Adrian Flux insurance services - discount for forum members.