Sorry missed that question just had to scroll back to find out what you are referring to.
Te tape underneath that holds it on is about 5-6mm away from the very edge, so there is a gap At the very corner if you stoop down low enough...
-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
what did you and your mk3 leon do today
- Thread starter seatleon2012
- Start date
Te tape underneath that holds it on is about 5-6mm away from the very edge, so there is a gap At the very corner if you stoop down low enough...
I posted a week ago that I found out some idiot had left a dent on my passenger side door on my Cupra. Luckily no scratches there but it is a visible dent. It is small by annoying. Size of a golf ball but just a few mm "deep". What can be done about that?
Anyway, tonight I found out someone had backed into the rear diffusor of our BMW 1 series, left a 5 inch crack. No luck lately.
No note left on the car this time either, it's been parked outside our house for two weeks due to the virus, wife works from home (it is her car)
Anyway, tonight I found out someone had backed into the rear diffusor of our BMW 1 series, left a 5 inch crack. No luck lately.
No note left on the car this time either, it's been parked outside our house for two weeks due to the virus, wife works from home (it is her car)
So, my passenger side mirror dips when reversing, all well and good. When manouvering around the car park however, it doesn't seem to raise when putting the car into D? Is there some minimum speed before it goes back up again or something?
EDIT: Nevermind, clearly a case of RTFM, raises back up when the ignition is off or you exceed 15kph forward.
EDIT: Nevermind, clearly a case of RTFM, raises back up when the ignition is off or you exceed 15kph forward.
Last edited:
Yup. The speed when it goes back up can be changed using Carista if you use that.
When you wash your car especially because it won't be used for a while and it still gets dirty just sitting there 
Sent from my CLT-L09 using Tapatalk
Sent from my CLT-L09 using Tapatalk
Maybe it is available only in the beta builds of the app, I've just used that.
Yesterday, I fitted a Chinese cheapo LED strip in the boot (but not yet wired in as I couldnt find any scotchlocks in my toolkit and being under virus lockdown etc). I fitted a pair of similar ones in my old Exeo ST and they were brilliant (literally and figuratively)
Today I fitted the dashcam I'd taken from my old car. I'd just started the job with bits of trim loose when it started hailing, then snowing, and it stopped as soon as I'd finished and gone back into the house.
Today I fitted the dashcam I'd taken from my old car. I'd just started the job with bits of trim loose when it started hailing, then snowing, and it stopped as soon as I'd finished and gone back into the house.
Not much else to do, so a multiple hour wash, decontamination, clay, polish and ceramic coat, followed by wheel sealant, tyre dressing and glass sealant. Very happy!
On Saturday, 4 new Mich PS4s 's fitted to cupra, as still needed motor for work till I got sorted out for home working, £544.80 at Blackcircles
Car has been sat on the drive doing nothing for the last week or so. Going to clean it this weekend and get the reiger diffuser fitted. In the mean time, here is another picture of it with the new fog intakes.
That looks the absolute nuts! (I'm biased as it's the same colour as mine though) Love the copper inserts.
Car has been sat on the drive doing nothing for the last week or so. Going to clean it this weekend and get the reiger diffuser fitted. In the mean time, here is another picture of it with the new fog intakes.
I'm pretty sure you've linked it before but I'm not sure where, but could you please share where you bought these? I'd definitely be interested in buying some for mine. Looks great.
I got them from letchworth Seat. Send me a DM and I’ll send you all the information I have including installation.
I got bored and impatient due t working from home today so fitted the Reiger diffuser in my lunch break. Yes it needs a clean, that’s tomorrow’s job.
Looks good that. Seems a bit of an oversight to have the stock one a dull black plastic when the rest of the car is as tidy as it is.
Similar threads
