Received my Pro version of
OBDeleven this week so I performed the following modifications
- Rear lights as DRL's
- One touch mirror fold
- Needle sweep with ignition on
Also upgraded my MIB1 system from version 415 to version 480. Noticed that the satnav and all other menus seem slightly faster, would definitely recommend this upgrade. I followed the
guide in the post linked below. Let me know if the download link is dead, I can provide the software.
Just leaving the rest of this post as a
guide to clear error code B201A00 as I had some issues with it after the software upgrade. Hope this helps someone else out in the future.
Seat Leon trouble code B201A00
1. Select the information control unit module
2. Adapations
3. Confirmation of installation change
4. Make a note of this value. Mine is shown below
5. Use a hex XOR calculator like the one linked below
6. Enter YOUR value for "confirmation of installation change" into input 1 and the value "C9D2" for input 2 and perform XOR function. Shown below
7. Go back to "confirmation of installation change" and input the new hexadecimal value you got from the calculator. In my case it was "4125"
8. Write the value and the error will disappear.