-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
My Silver K1 & Track 172 Cup
- Thread starter Chambers_CUPRA
- Start date
Finially fitted the new Roll Centre hubs.
Fitted the pre-loaded bearings from Pms into the solid top mount
Old bearing pressed out
New pre-loaded bearing in
Engine mounts on and all torqued up
New purchase
Fitted the pre-loaded bearings from Pms into the solid top mount
Old bearing pressed out
New pre-loaded bearing in
Engine mounts on and all torqued up
New purchase
looking good dudewhats the clearance like with the oil cooler to the front bumper?
Thanks mucka. Just enough hopefully I forgot to check really lol. There should be plenty tho.
Finished off the oil cooler setup.
Hoses made up.
Tools used
These jaws where well handy
Oil cooler with lines
Wheel stud and nut kit fitted
Rear with 3mm spacer
Front with 5mm spacer
Ordered new inner track rods as that's the only part I haven't re-newed with the new hubs.
Hoses made up.
Tools used
These jaws where well handy
Oil cooler with lines
Wheel stud and nut kit fitted
Rear with 3mm spacer
Front with 5mm spacer
Ordered new inner track rods as that's the only part I haven't re-newed with the new hubs.
Haha they'll do the job just fine I think
You got a thread up for your whip?
I will get one up at some point now that im starting to do things to the car.
Yeah genuine k1 was a spare of the moment buy last year but the best decission i could have made.
Have you got your exhaust on yet?
When is that inlet manifold being fitted to the clio?
Haha cool. Love K1's
any mods? Not yet soon tho, just had 2 tyres fitted but ones not sealing in the rim
![[:@]](/forums/styles/seatcupra/oldforumsmileys/furious.gif "Furious [:@]")
so might look at but some wheels. The inlet on the clio, not sure yet haha. Wanna get the suspension and brakes sorted then I'm gunna source new Ecu, have a loom made and get some cams so probably during the winter tbh lol.
Haha cool. Love K1's
Not yet soon tho, just had 2 tyres fitted but ones not sealing in the rim
The inlet on the clio, not sure yet haha. Wanna get the suspension and brakes sorted then I'm gunna source new Ecu, have a loom made and get some cams so probably during the winter tbh lol.
Will certainly show many cars up on track when you are done with it especially with them handling mods.
So far ive only got a revo intake a revo stage one map and a hpfp.
Waiting for a bcs exhaust to come through the post anytime in the next week or so then i can move on to fmic and wmi etc.
Clio's looking more like a car now.
Sorted the dash out
And lobbed it in. Was a right fight and was rather floppy so had to make some brackets to support it.
I brought these hydraulic cable crimping tool to wired up the battery.
Also relocated the OBD port and airbag ecu (not that I have airbags but I don't wanna cut up the loom just yet)
Got the drivers seat in and the engine all back together
With the car out side and wired up thought I'd go for a run in it round the block, turned the key and it won't start. not sure why yet, engine turns a quarter and stops then there's a loud clicking noise so hoping starter or something simple.
Spent most the day on the clio so today I'm gunna put he exhaust on the K1
Sorted the dash out
And lobbed it in. Was a right fight and was rather floppy so had to make some brackets to support it.
I brought these hydraulic cable crimping tool to wired up the battery.
Also relocated the OBD port and airbag ecu (not that I have airbags but I don't wanna cut up the loom just yet)
Got the drivers seat in and the engine all back together
With the car out side and wired up thought I'd go for a run in it round the block, turned the key and it won't start.
not sure why yet, engine turns a quarter and stops then there's a loud clicking noise so hoping starter or something simple. Spent most the day on the clio so today I'm gunna put he exhaust on the K1
Its most likely the battery get some jump leads on it im sure it will fire up then check how much voltage you have with the engine running.
I've got the old battery so was gunna try and start it on that. Then I'd have to charge the red top battery up lol
Similar threads
