Revo Stage 1,Bilstein/Eibach......what next??

[redtill]

Just had the above done to my 1.8t 20vt AUQ & was wondering what I should do next.So far I'm thinking Milltek cat back & cone filter but I also wanna peplace some of the pipework with silicone bits.Only thing is I'm not sure exactley which kit/pipes I should replace for breathing & turbo/intercooler.Any recommendations much appreciated

Would these be a good start??

http://www.ebay.co.uk/itm/271340489...sop=1&_dmd=1&_ipg=50&_nkw=271340489987&_rdc=1

http://www.ebay.co.uk/itm/150888969752?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT

 

[jackoni]

Both would be a good shout, TIP is definitly a mod worth doing! Thats really all the pipes for intercooler/ boost related! Fresh PCV pipes always look good and a good upgrade over standard

Downpipe/decat?
Forge 007/008 or fresh 710N?
Heatshield?
Boost gauge since your now mapped?
Silicone N75 and DV pipes?
Frontmount/sidemount?

 

[redtill]

Both would be a good shout, TIP is definitly a mod worth doing! Thats really all the pipes for intercooler/ boost related! Fresh PCV pipes always look good and a good upgrade over standard

Downpipe/decat?
Forge 007/008 or fresh 710N?
Heatshield?
Boost gauge since your now mapped?
Silicone N75 and DV pipes?
Frontmount/sidemount?

Cheers............any other suggestions welcome

 

[redtill]

Booked in @ Midland VW for a smoke test before ordering any of the above
Came across JBS Auto Designs in Derby who'll fit the above bit's for £65+ p/h
& they quote 2 hrs to fit the TIP & silicone boost kit.Getting there....slowly

 

[jackoni]

Booked in @ Midland VW for a smoke test before ordering any of the above
Came across JBS Auto Designs in Derby who'll fit the above bit's for £65+ p/h
& they quote 2 hrs to fit the TIP & silicone boost kit.Getting there....slowly

Good idea had mine done last week and found a small leak that made a big difference1

If you even a wee bit handy them pipes can be fitted at home in a couple of hours, saving you £130 for the above parts!

Maybe better to fit them first then do a smoke test since you are taking off all the major pipes that can leak?

 

[redtill]

Just had the smoke test..........no leaks.may still change the TIP at some point
Decided to upgrade the exhaust.....Jetex or milltek???