-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
My Silver K1 & Track 172 Cup
- Thread starter Chambers_CUPRA
- Start date
just noticed i only saw the 1st page of the thread and was commenting on the leon (im a newbie) but the cup is also very nice
Haven't seen the clio for little while, but a had a delivery from Puremotorsport.
So we have the Comp race engine mounts, strengthened CUP wishbones (gives more caster) with bearing conversion and weather seals, low temp stat, stud n nut conversion and the preloaded top mount bearings (makes the steering heavier) :smile:
Should make a nice addition and work well with the roll centre hubs. Can't wait to get them so I can get it rolling :smile:
Will update as the parts go on.
So we have the Comp race engine mounts, strengthened CUP wishbones (gives more caster) with bearing conversion and weather seals, low temp stat, stud n nut conversion and the preloaded top mount bearings (makes the steering heavier) :smile:
Should make a nice addition and work well with the roll centre hubs. Can't wait to get them so I can get it rolling :smile:
Will update as the parts go on.
Hope so, can't wait to get it out the garage haha. Just waiting on my hubs.
Planning a massive push on it tho, so keep an eye free haha
The Clio is going to be mental quick through the bends, but they aren't bad anyway! The new arms look like a engineering masterpiece, they looks awesome.
I'd love a 172/182 on the drive for trackdays - looking at threads like this makes me look at pistonheads!
Well power will be on the up soon
Bagged the last ever made RS2 manifold.
Not quiet ITB's and will be about 20BHP down on ITB's but I won't have any reliability issues or problems like cold start or having the ITB's balanced.
But will see a nice 200BHP GroupN timing and maybe a tad more with some different cams.
Should be pretty lively weighing nothing and my suspension set up.
Need to sort an Ecu firstly and bigger brakes before all that lol
Should look like this eventually
Bagged the last ever made RS2 manifold.
Not quiet ITB's and will be about 20BHP down on ITB's but I won't have any reliability issues or problems like cold start or having the ITB's balanced.
But will see a nice 200BHP GroupN timing and maybe a tad more with some different cams.
Should be pretty lively weighing nothing and my suspension set up.
Need to sort an Ecu firstly and bigger brakes before all that lol
Should look like this eventually
some quality parts and time put into both cars, clios are beast track cars been shocked by many at castle combe
Thanks lads.
Got me manifold
and hopefully my hubs will be here next week fingers crossed.
Filter is tiny so I'll be getting a bigger on for sure
Got me manifold
and hopefully my hubs will be here next week fingers crossed. 
Filter is tiny so I'll be getting a bigger on for sure
That filter does look a little small but I'm sure your be able to fit a nice sized filter in the available space.
Will you be getting water meth? Don't really hear of many using it on a n.a car.
Will you be getting water meth? Don't really hear of many using it on a n.a car.
Is a tad small looking lol. I'm sure it can flow enough, but the manifold is designed to be a bolt on no modding needing kit so would need to be small to clear the battery and Ecu etc, but as I've relocated the battery and Ecu and I'm running totally different gear box mount I reckon I'll beable to have a bigger filter or even use my ITG maxogen intake with it.
Haven't looking into meth never seen anyone running it on n/a like you say maybe worth a little look tho haha.
Been debating weather to sell the leon recently but couldn't bring my self to. Lol
Nothing else out there Id wanna replace it with and I generally like it too much, so decided I miss the exhaust note of the miltek I had and ordered a decat and non res cat back system from a mate a VWRacing. Bargain at £558 plus postage
So will be looking into stage 2 map also as well finishing the clio
Nothing else out there Id wanna replace it with and I generally like it too much, so decided I miss the exhaust note of the miltek I had and ordered a decat and non res cat back system from a mate a VWRacing. Bargain at £558 plus postage
So will be looking into stage 2 map also
as well finishing the clio
Similar threads
