-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
My Cupra K1 replacement-Golf R mk6-Aston Martin BBK
- Thread starter toosmiles
- Start date
just ordered a runner flap delete kit from creation motorsport for £85 posted
i had the Apr rfd kit on last time on my K1 and that alone was £250,ill wait for fitting though as i need a code/flash from Revo usually to cure the cold starting issues this mod causes
Also just fitted a set of these to the number plate
http://www.ebay.co.uk/itm/LED-LICEN...MK4-MK5-PASSAT-POLO-ERROR-FREE-/171394265678?
a bit fiddley to get the pins to match up but done in about 20 mins,and NO bulb out on the dash upto now but ill keep you posted
bright isnt in it lol
i had the Apr rfd kit on last time on my K1 and that alone was £250,ill wait for fitting though as i need a code/flash from Revo usually to cure the cold starting issues this mod causes
Also just fitted a set of these to the number plate
http://www.ebay.co.uk/itm/LED-LICEN...MK4-MK5-PASSAT-POLO-ERROR-FREE-/171394265678?
a bit fiddley to get the pins to match up but done in about 20 mins,and NO bulb out on the dash upto now but ill keep you posted
bright isnt in it lol
Last edited:
Sweet they will be great,changed my bulbs to led's and made a big difference compared to standard but these will be the next level
so nice mate, well jealous lol
Interior is 100000 times nicer than the cupra
i do miss the K1 but yes this is a big step up all round tbf
need to get round to fit the led puddle lights in the mirrors then fit my new clean number plates,cant be doing with this 'GB' sticker and lines around it lol
might have a go at removing the front plate holder to see how it looks
Ha ha I'm the same regards number plates mate,mine had polar ford ones on when I got it 
still got the rear to replace as I'm getting the rear valance wrapped/sprayed gloss black and want to fit the new plate with tape instead of bloody screws.
Hopefully will be able to wrap it but unsure if it will stick as it's not a completely smooth finish
still got the rear to replace as I'm getting the rear valance wrapped/sprayed gloss black and want to fit the new plate with tape instead of bloody screws.Hopefully will be able to wrap it but unsure if it will stick as it's not a completely smooth finish
hopefully the people that wrap it would clean it up ready prior fitting m8
gotta put the plates on with tape though
gotta put the plates on with tape though
Yes will give it a pre clean myself as its due one,they are a reputable company in North Wales not many miles from work.When i spoke with them they said as its the 3m di noc vinyl it may not stick so going on Saturday to give it a try.Fingers crossed it will work as its way cheaper than spraying but still gives a good finish.
Last edited:
Keep meaning to ask you Simon whereabouts in N Wales you from? My oldest brother lives near bodelwyddan castle.My work is just in Wales Broughton at Airbus. Bit of a bind for me 70 mile round trip but worth it.
funnily enough i live about 7 miles away from the castle in dyserth m8
also have a good friend(niece boyf) works at airbus
whereabouts is the wrapping getting done then m8?
No way it's a small world as they say.Its a good place to work mate I think so anyway,helps being interested in aircraft. This is the company that i have seen/spoke with
http://www.autopro-motorsport.co.uk
Have seen a roof wrap they have done on a vr and its a very good job.They have said £35 to do my car! Don't think that's a bad price really.
http://www.autopro-motorsport.co.uk
Have seen a roof wrap they have done on a vr and its a very good job.They have said £35 to do my car! Don't think that's a bad price really.
Last edited:
Finally got around to fitting my led puddle lights and putting my new number plates on today
puddle lights
stripped down with original light
new led light installed
fitted
Onto the new plates,back original
new plate on
front ive decided to take the plate holder off for a better,cleaner look and some more airflow
original
I ended up having to drill the plastic lugs out they were stuck well lol
new 1 on
a few hours work but well impressed with the outcome,looks fresh and clean
Ill take some more pics later when dark to show the difference in the mirror leds and with the new number plate leds on
cheers
puddle lights
stripped down with original light
new led light installed
fitted
Onto the new plates,back original
new plate on
front ive decided to take the plate holder off for a better,cleaner look and some more airflow
original
I ended up having to drill the plastic lugs out they were stuck well lol
new 1 on
a few hours work but well impressed with the outcome,looks fresh and clean
Ill take some more pics later when dark to show the difference in the mirror leds and with the new number plate leds on
cheers
Last edited:
Similar threads
