hi guys ,I have just spent a few hours reading your full thread (RED BULL) great write up so far and giving me a few ideas of my own.
Is it just me or is £435 no a little expensive for one front disc?
or £870 for two plus say £130 for ds2500 aswell nearly a grand on front brakes think you guy have more money than me, lol.
keep up the good work...
Thanks for spending the time reading through it all, sorry for the poor spellings!!!
It's £435 for the pair of front discs. Which is more reasonable than most kits of these type of kits but still not cheap.
Have you got a RR thread of your car? If not get one going its nice to keep track of what you've done and also get other people feed back.
Are you sure that doesn't include atmospheric pressure? 22psi approx max for stock /hybrid turbo especially if you don't run uprated rods. Get a RR thread going and we'll all help you out best we can.ahh,I see . I was shure it said one disc , lol.thats defo not too bad then you are right.
I didnt even notice any spelling mistakes,lol.
No havent done a RR thread yet only got car in Aughust lol and took me a few months to register on here as laptop was knackerd for a while.I do plan on doin one tho at some point.
When I got the car it was already mapped cat back exhaust pipercross air filter.
I have just put on Badger 5 TIP last weekend ,wot a differance its made got " Welly cooler " there to be fitted as soon as pipe work arrives oh and a 4 bar FPR aswell.
Out of intrest what does your car boost at ? mine over boosts to about 30psi then hold back to about 25psi. does this sound too much? thanks for any advice in advance..
Are you sure that doesn't include atmospheric pressure? 22psi approx max for stock /hybrid turbo especially if you don't run uprated rods. Get a RR thread going and we'll all help you out best we can.
Lovely car Redbull and a great RR. Liking your approach to the build.
Re this morings paint / bodywork damage don't agonise too much over it ,its only a car mate and you'll soon get it sorted.
These things happen mate. Hopefully it'll be a cheap repair. You'll just need as a good painter as onvi is notoriously difficult to blend and match. When I had a fight with a wheelie bin sized badger a few years ago I ended up having to have a front end respray which blended into the doors. Hopefully it won't derail all your good chassis and engine work