Jabba remap rolling road results & questions

[Rich891603]

I had my lcr checked on a rolling road yesterday to see how my car was running after stage 1 jabba remap.

this was my results.

Jabba claim 256-265 bhp & 265-287 torque

my bhp came out 245 wich is low to there claim but the torque is around 275 which is within there claim.

anythoughts

also has anyone else had a jabba remap and have results to compare??

thanks

 

[JoshDoubleYou]

bump

 

[glynnd]

Could be one of several things really.
Easiest thing to it get it live logged unless you want to start repalcing sensors etc that are perfectly ok. I have had a leon for a number of years both PD and 20vt and am amazed at the number of members that seem to have reduced performance and spend lots of time and effort trying to get to the bottom of their problem, me included!
Strange that Michael at Jabba didnt mention anything, if he did the map he is usually very forthcoming on possible issues.

 

[traumapat]

Have you tried speaking to jabba?

 

[ibizacupra]

 

[nally270lb.TQE]

Some info and links here. I am not clued up on dyno`s so thought this had some good info

http://www.sdsefi.com/techdyno.htm

 

[LEE69]

That dip isn't helping at 4600 revs

 

[Sxanth]

Bucket of salt.

All about the shape, that one looks a bit weird to me though.

 

[Rich891603]

Bucket of salt.

All about the shape, that one looks a bit weird to me though.

?

No none of the dips help lol its just finding what they are. its been read since its been mapped and apart from the coil pack that was gone nothing came up (well n249 bypass)

i called jabba today they want to take a look this week, hopefully it will be ok.

 

[Sxanth]

I realise that which is why I said a dyno is only useful for looking at the smoothness of the powr delivery...

Ie the shape of the graph. Clearly you know all of this despite posting and only showing concern for the bhp output and not the busted dips in the graph.

I appologise for mentioning information that wasn't in your original post and will try harder next time.....

 

[JoshDoubleYou]

no need to be a jackass, he wants to find out what the dips are and why the low hp.

 

[tom t]

what fuel are you using? try v power or possible tesco 99 if ure not allready

 

[Rich891603]

what fuel are you using? try v power or possible tesco 99 if ure not allready

I use tesco momentum but will try vpower.

I found out there's a shell near where I live haha

Thanks

 

[Rich891603]

Jabba checked it over and found nothing wrong just a lack in peak power. reading was basically the same as before also.

 

[virdi]

245 is about right. This is a realistic figure from a stage 1.

 

[tom t]

Here is a thread with my jabba stage 1 map. What mods if any do you have?

http://www.seatcupra.net/forums/showthread.php?t=320459

 

[CupraRmark]

245 is about right. This is a realistic figure from a stage 1.

I'd of thought 260 would be around a good stage 1 remap but as above dyno lottery is always the factor, but I then would want to sort the power dip out aswell

 

[JoeBrooke]

It should definitely be higher than that, try giving your MAF a clean maybe?

 

[CharlieRCupes]

Mine only made around 250 on a stage 1 which is more realistic than 260/270. Anything over 250 is probably more to do with other mods or the dyno used. With an exhaust and a TIP you will be making the power you feel it should make.

 

[Rich891603]

Here is a thread with my jabba stage 1 map. What mods if any do you have?

http://www.seatcupra.net/forums/showthread.php?t=320459

Just a Jetex cone a 007p, Milltek cat back.

Turbo went bang anyway lol