-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
Small Front Number Plates?
- Thread starter Manny
- Start date
I decided to just get standard plates but on the front, i had the excess white parts trimmed away, so its alot shorter in width
I will try and get them fitted on Saturday if I have time and get pics up!!
---
I am here: http://tapatalk.com/map.php?nky4xw
---
I am here: http://tapatalk.com/map.php?nky4xw
Fitting them on Friday!!
I will post pics for you!!
---
I am here: http://tapatalk.com/map.php?c34zab
I will post pics for you!!
---
I am here: http://tapatalk.com/map.php?c34zab
Right ... sorry for the delay guys ... new smaller number plats have fially been printed and fitted.
I have also gone for "Prefix - Old UK Legal Print"
[Do ignore the state of the car ... it was washed 3 days ago ... A19 is so dirty]
I have also gone for "Prefix - Old UK Legal Print"
[Do ignore the state of the car ... it was washed 3 days ago ... A19 is so dirty]
Last edited:
Yeah ... these legal size, a new style plate would have reduced the size of the letters.
Also the text is legal for this plate, but could get funny if they turn around and say that the car is new .... LOL!!
i got mine from halfords
How much for just the front plate if you dont mind me asking!
think there about 15 quid mate but if you get them from halfords they are not made while you wait like other sizes mine took about 5 days to arive
If I had a personalised numberplate with 5 or 6 characters only, i would certainly look at smalle plates.
The lettering would all be the correct size, but would choose a less wide plate, so it all looks proportional. So Mr plod and his fancy numberplate recognition camera, wont have any problems.
The lettering would all be the correct size, but would choose a less wide plate, so it all looks proportional. So Mr plod and his fancy numberplate recognition camera, wont have any problems.
If I had a personalised numberplate with 5 or 6 characters only, i would certainly look at smalle plates.
The lettering would all be the correct size, but would choose a less wide plate, so it all looks proportional. So Mr plod and his fancy numberplate recognition camera, wont have any problems.
Are you planning for mr plod to flash you??
No??
The police have an issue if the font used is not the standard font, at the correct pitch, with the correct spacing, correct?
So as long as your personalised numberplate is written in the correct font / spacing - then surely there cant be anything wrong in getting a less wide plate, that fits just the lettering?
As per the pics above in Jarre's post above.
Ordered my new plates
Just went for a small one for the front (330x111mm) and a normal one for the rear (520x111mm) in the UK OLD LEGAL font
Where from?
Ordered my new plates
Just went for a small one for the front (330x111mm) and a normal one for the rear (520x111mm) in the UK OLD LEGAL font
Sweet ... it is a great font!!
Just a little different from the current style!!
Did you get them from the same place??
That was a joke!!
Legality of UK numberplates:
http://www.direct.gov.uk/prod_consu...n/@motor/documents/digitalasset/dg_067666.pdf
** PAGE 9:
Character height 79mm
Character width (except the figure 1 or letter I) 50mm
Character stroke 14mm
Space between characters 11mm
Space between groups 33mm
Top, bottom and side margins (minimum) 11mm
Vertical space between groups 19mm
I'm looking for some plates where they just have the SEAT logo at the bottom, or www.SEAT.co.uk or something. Can we get hold of these? My local dealer has "Dealer Name SEAT Location" on theirs...
Similar threads
