-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
-
The forums will be offline for maintenance on Friday 15th November at 10pm for up to an hour. Thank you for your patience.
Lcr rebuild no 2 :)
- Thread starter paul-murphys
- Start date
yeah its true mateall good things have to come to an end
so what you buying next? you no its going to end up at a scrap yard
Good choice Paul, got one myself after a long wait... The turbine housing discharge is quite long isn't it, you might struggle getting the downpipe in bending round near the brake servo / master cylinder, sure you'll manage mate
Nice one Paul, whens it all going on? Who you getting to do it you reckon?
Will have to have a catchup soon
Will have to have a catchup soon
Thanks everyone graham got a Downpipe being made I no its going to be tight but person who's making Downpipe said not the hardest one he's going to have made,
It's a 49lb wheel so should flow 450 plus I no people are pushing over 500 in 2.0 engines. I'm after the 400-450 mark as using methanol
Scott got a few companies that said would do it but got nick at company that can't be names as thread will be deleted said he will sort it out, said if leave him car will map it then get me a magazine cover as this may be the 1st efr6858 in the uk
when you free give us a txt and look for me on facebook I'm muffin-man murphy can catch up soon if free.
It's a 49lb wheel so should flow 450 plus I no people are pushing over 500 in 2.0 engines. I'm after the 400-450 mark as using methanol
Scott got a few companies that said would do it but got nick at company that can't be names as thread will be deleted said he will sort it out, said if leave him car will map it then get me a magazine cover as this may be the 1st efr6858 in the uk
when you free give us a txt and look for me on facebook I'm muffin-man murphy
can catch up soon if free.
Just waiting on the bits from INA mate, should be here anyday now, decided to stay on the K04 to bed the engine in though so probably about 6 months off.
Thinking about possibly using nick to map mine as a few have recommended him, just a bit of a trek there
He knows what he's doing I've used several company's and he's the best, I still need a fuel pump and electronic boost control then can give him car and let him do his magic.
I no boys that have got train left car with him then come back week later and chuffed I'm meeting a guy who's got 285 bhp and 325lbs ft torque tomorrow and that's after it's been de
-tuned.
What parts you waiting for?
I no boys that have got train left car with him then come back week later and chuffed I'm meeting a guy who's got 285 bhp and 325lbs ft torque tomorrow and that's after it's been de
-tuned.
What parts you waiting for?
Wow that's a big shipping list.
What fuel pump you going to use I need one and not sure if should use in tank or in line.
Where you seen them? I will get one
How far you off your engine build and who using to rebuild engine?
Waiting on my engine mounts. and nicks going to start my build feb as away in Wales fr 6 weeks in jan and need car for that
How far you off your engine build and who using to rebuild engine?
Waiting on my engine mounts. and nicks going to start my build feb as away in Wales fr 6 weeks in jan and need car for that
Found this on the bay
http://www.ebay.co.uk/itm/370260453114?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
I know Bill does stainless fittings which are direct fit for our lines, and tufty fitted one to his S3 so some good pics in his ride of where and how to locate it.
Need to speak to an older engine builder just down the road about building the engine up as i want to assist him to see how its done, everyone recommends him for boring it out too.
Hopefully if this house doesnt continue to rape me of my money should be built feb/march time
http://www.ebay.co.uk/itm/370260453114?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
I know Bill does stainless fittings which are direct fit for our lines, and tufty fitted one to his S3 so some good pics in his ride of where and how to locate it.
Need to speak to an older engine builder just down the road about building the engine up as i want to assist him to see how its done, everyone recommends him for boring it out too.
Hopefully if this house doesnt continue to rape me of my money should be built feb/march time
Similar threads
